new

Textile 12 pocket Tool Roll, PETROGRAD, for chisels

Сумка-скрутка тканевая, ПЕТРОГРАДЪ, модель 2, для стамесок, 12 карманов. Предназначена для хранения инструментов: резцов, стамесок, ножей. Максимальная длина инструмента - 300мм. Прошитые швы. Цвет сумки в зависимости от партии может отличаться.

Во избежание выскальзывания инструментов из сумки рекомендуем укладывать стамески в карманы сумки рукоятями внутрь. Также рекомендуем укладывать стамески в сумку с надетыми на режущие кромки защитными колпачками.

Производство - Россия. Производитель оставляет за собой право вносить в конструкцию сумки изменения, не приводящие к ухудшению её качеств.

1200p
Отзывов: 1
Рейтинг :
new

Mobile Tool Cabinet PETROGRAD, 540*470*850 mm

The cabinet is designed for storing carpentry or metalwork tools, oils, paints and varnishes or other accessories. The base of the curbstone is made of plywood on 4 rollers. Two of which are swivel with a locking mechanism. For quick and easy movement around the workshop.

Cabinet height 850mm, width - 540mm, depth - 470mm.
The cabinet has 3 compartments for storing various utensils.

Open top shelf 403mm wide, 422mm deep and 98mm high

Drawer for storing tools, small tools or abrasive materials. Internal dimensions of the box are 367x80x367mm (W x H x D).

The compartment with a door has a removable, adjustable shelf that divides into two sections.

Attention! The manufacturer reserves the right to make design changes without prior notice to the consumer. Changes do not affect the performance and specifications of the product. The tool is not included.

Made at the PETROGRAD joinery and carpentry tools factory.
Production - (Russia)
24000p
Отзывов: 1
Рейтинг :
new

Workbench 1060*500 mm, with tray, front vise - HV515, side vise - HV582

The dimensions of the workbench are 1060x500mm, the thickness of the board is 40mm. Strapping board 120mm high with dovetail connections. Front (front) vice and rear (longitudinal) vice are installed on the workbench. The front vise is made on the basis of a metal screw pair from York (Czech Republic), opening width - 225mm. The width of the movable jaw of the front vise is 350mm, the height is 110mm, and the thickness is 50mm. Longitudinal vise - sliding cracker. Made on the basis of a York screw with metal guides. This vice allows you to clamp workpieces not only for longitudinal planing, but also for sawing box spikes. Longitudinal vise stroke - 145mm. The jaw of the vise and the jaw of this model are straight, not decorated. To install the stops, a row of holes was drilled in the tabletop, 11 pieces, +2 hole was drilled in a cracker. In the strapping board on the working side, 3 horizontal holes for the stops are also drilled. Hole diameter - 19mm. At the back of the workbench there is a tray for small tools, tray depth - 35mm, width - 180mm, length - 980mm. To strengthen the pedestal between the legs, an additional upper pair of longitudinal crossbars is installed. The material of the workbench is a beech board, the pedestal and handles are solid beech. The worktop and the base are coated with Borma tung oil. The workbench must be installed on a flat horizontal surface to avoid warping and deformation of the workbench. The size of the pedestal is 1060x500x800mm, the section of the legs is 90x45mm. Workbench height - 850mm. The weight of the workbench is about 50kg. There are 2 configuration options available to order: a workbench with a pedestal and a separate workbench. Small changes may be made to the workbench design without affecting its quality. Bench stops are sold separately. All workbenches manufactured by Rubankov can be equipped with additional vertical vise and support board. The workbench can also be completed with a sub-bench for tools. Production - Rubankov workshop (Russia)
62000p out of stock
Отзывов: 1
Рейтинг :
new

Carving knife PETROGRAD, model Hatchet N6

Инструмент представлен линейкой штихелей с расширяющимся клинком с шириной рабочей части 27 мм, 38 мм, 43 мм. Имеют широкий спектр применения при резьбе, является одним из основных ножей в геометрической резьбе, а также удобен и востребован в технике резьбы Whittling. Штихели выполнены из стали 9ХФ и имеют рукояти из клёна, покрытые тунговым маслом. угол заточки - 20 градусов, толщина клинка - 2 мм.
Сделано в России.

Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ

1400p
Отзывов: 1
Рейтинг :
new

Magazine Master&Workshop 2021 № 2 (12)

Magazine Master and Workshop 2021 № 2 (12). This is a periodical magazine about woodworking, craftsmen and workshops, about the news of the carpentry world. The best masters share their knowledge and experience with everyone. Illustrated specialized full-color magazine.

on the cover: Fyodor Zhiltsov, master of furniture repair and restoration.
900p
Отзывов: 1
Рейтинг :
new

Straight Gouge Rubankov, N7, 12mm

Straight Gouge Rubankov, N7, 12mm (0.47 inches)

Carving chisel "Rubankov" Straight Gouge N7, 12mm (0.47 inches). This is universal chisel that perfectly suits for carving hard and soft wood. The width of the cutting edge is 12mm ( 0.47 inches ). The total lenght of the gouge is 280mm (11.02inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 135mm (5.31inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.

Gouge is sharpened, honed and fully ready to work out of the box.
This model is for hand cutting and can be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )

3500p
Отзывов: 1
Рейтинг :
new

Strop PETROGRAD, cylinder, D25mm/170mm/270mm

Strop PETROGRAD, cylinder, D25mm/170mm/270mm. A round bar with glued leather is intended for finishing semicircular cutting chisels, scrapers, etc. Can be used with polishing pastes. Material - ash, leather - "inversion", smooth, thickness 2 mm. Skin color may differ from the image on the website.

Production - Russia

1200p
Отзывов: 1
Рейтинг :
new

Carving set PETROGRAD n16, 23 tools, chisel handle

Author's set of mini-cutters for miniature wood carving. Perfect for modelers. Made of steel R6M5. Handles are made of various noble wood species, for example, beech, pear, etc. The author reserves the right to change the shape and design of the handles. Now they are available in two types: straight and mushroom. Supplied in plywood box. All cutters are sharpened and ready to go.

The set includes:
Straight flat chisels: 0.7mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm
Half round chisels: 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm.
Slant chisels, left and right sharpening: 2.0mm, 3.0mm.
Mini knife about 4mm.
Corner "V" shaped.


Made and sharpened by hand.
Author: M.Kirsanov
30000p
Отзывов: 1
Рейтинг :
new

Leather Knife PETROGRAD, type 2, right bevel

Нож раскроечный ПЕТРОГРАДЪ, модель 2, правая заточка, в чехле. Можно использовать для прямолинейного реза и торцевания кожи. Нож укомплектован кожаным чехлом.
Нож имеет 2 режущие стороны. Верхние и нижние режущие кромки заточены и доведены до бритвенного состояния. Нож не требует доводки и готов к работе. 

Выполнены из инструментальной стали и закалены до твёрдости 58-61HRC.

Произведено в России на фабрике «ПЕТРОГРАДЪ

 

4400p
Отзывов: 1
Рейтинг :
new

Diamond sharpening stone PETROGRAD 150mm*12mm*3mm 1200 grit

Diamond stones for sharpening knives, small chisels, cutting tools and other tools. The sharpening stones are designed for cutting high carbon steels. Diamond stones are a monolithic bar 150 x 12 mm with a continuous diamond layer (dusting). The diamond-bearing layer of grinding stones is made of synthetic diamond micropowders on a copper-tin bond M2-01.
2640p
Отзывов: 1
Рейтинг :
new

The book `Business in carpentry`, Bazhan Yu.P.

Book "Modern carpentry workshop", Bazhan Yu.P. Nizhny Novgorod. 2021. Hardcover, 206p. Glossy coated paper.
1500p out of stock
Отзывов: 1
Рейтинг :
new

Axe Anika, carving model

A light ax is useful for wood carving. The beveled chamfer of the cutting edge makes this ax aggressive. This forged ax, made of steel ШХ15, blade hardening is about 58HRC. The handle is made of ash and covered with oil.
It is completed with a leather case with a holster clasp. Reliably protects the cutting edge.
Total length approx. 360 mm.
RK about 100 mm.
The ax weighs only 800 grams.

The manufacturer has the right, without prior notice, to make changes to the product that do not impair its technical characteristics, but are the result of work to improve its design or production technology.
10600p out of stock
Отзывов: 1
Рейтинг :

Sharpening stone PETROGRAD, 200*70*20mm, 800 grit

Water stones. Grain size: 150, 360, 500, 1000, 1500, 2000 and 4000 grit. Size 200*70*20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Made in Russia.

 

2060p
Отзывов: 1
Рейтинг:

Sharpening stone PETROGRAD, 200*70*20mm, 1500 grit

Water stones. Grain size: 150, 360, 500, 1000, 1500, 2000 and 4000 grit. Size 200*70*20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Made in Russia.

 

2440p
Отзывов: 1
Рейтинг:

Sharpening set PETROGRAD N4, for knives, 6 stones

Water stones. Grain size: 150, 360, 500, 1000, 1500 and 2000. Size 15х15х120mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Production - made in Russia.

To select and order an abrasive stone of desired grain size, click on the name of the product.

2380p
Отзывов: 1
Рейтинг:

Outdoor axe PETROGRAD, model Roslavl X, curved handle

Топор кованый ПЕТРОГРАДЪ, Рославль X, изогнутая рукоять. Топор Рославль Х отличается эффектной удлиненной формой полотна. Благодаря такой форме оголова топор можно брать хватом близким к полотну и не бояться повредить руку при работе. Изогнутая рукоять позволяет обеспечивает надежный захват. Плотницкий топор удобен при тёске и ошкуривании бревен. Также топор Рославль X отлично сбалансирован и подойдет для огромного вида работ, как походный топор, для не больших плотницких и столярных работ и просто как универсальный топор.

Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ.
Сделано в России.

10500p
Отзывов: 1
Рейтинг:

Outdoor axe PETROGRAD, model Roslavl VII, curved handle

Hand forged outdoor axe Roslavl VII with curved handle.

  • Total lenght is 370mm ( 14,57inch )
  • Height of axe is 140mm ( 5,51inch )
  • Lenght of cutting edge is 120mm ( 4,72inch )
  • Axe is hand forged from 65G steel (Germany 66Mn4, Ck67, USA 1066).
  • Curved cutting edge was straight sharpened.
  • Total weight of axe is 0,7kg  ( ± 0,05kg )
  • Handle lenght is 320mm ( 12,6inch) and it is made from solid mapple with right grain position.
  • The axe comes with leather case for protecting cutting edge.

Axe is well balanced and would be a good choice for a lot types of work. It will be great as outdoor axe, for small carpentry and othe woodwork projects. This is kind of universal axe for everyone.

Axe Roslavl VII produced by Petrograd toolworks in Saint Petersburg Russia.

9500p
Отзывов: 1
Рейтинг:

Shallow Hook Knife, PETROGRAD, type 3, left-handed

Hook knife is used for cutting out a hollow in a wooden spoon or scoop, as well as for other similar work. Shallow hook knife N3 has a water drop profile of blade. That's making it perfectly choose for cut wooden spoons bowl. The left version of knife is designed to work with the left hand towards yourself or right hand to outside.

  • Knife blade width - 12mm.
  • Hook cutter length - 235 mm
  • Handle length - 160 mm
  • Hook knife blade made from tool steel and hardened up to 58-60HRC.
  • All hook cutters are sharpened and ready to go.
  • The outerside of the hook is ring-shaped and perfectly polished. Thats allow you to cut wood cleanly and smoothly without scoring.
  • The handle of the hook knife is made of maple and coated with oil.

The right version of hook knife is designed to work with the right hand towards yourself, the left version - with the left hand towards yourself.
Made by Petrograd toolworks in Saint-Petersburg Russia.

2900p
Отзывов: 1
Рейтинг:

PETROGRAD Cup Chuck D35mm for Woodturning Lathe 1` - 8 UNC

Chuck diameter 35mm. Steel unhardened chuck for turning centers. A simple and reasonably safe chuck compared to a jaw chuck. Simple and reliable and compact. Allows you to work in close proximity to it.. Parts are easily and securely fastened in the chuck, as the chuck has a small inner cone. It is also possible to work without a back center.

Made at the PETROGRAD joinery and carpentry tools factory.
Production (Russia)

3400p
Отзывов: 1
Рейтинг:

PETROGRAD Faceplate 75mm for Woorturning Lathe, 1` - 8 UNC

Планшайба для токарных работ, Петроградъ, D75мм, 1' - 8 UNC (8tpi). Накручивается на шпиндель передней бабки. Резьба 1' - 8 UNC (8tpi).  Планшайба представляет собой стальной незакаленный диск с соединительной трубой. Она имеет фиксатор, а также сквозные отверстия для крепления заготовок. 

Изготовлен на фабрике столярных и плотницких инструментов ПЕТРОГРАДЪ.
Производство (Россия)

4700p
Отзывов: 1
Рейтинг:

Leather strops PETROGRAD, 200mm*70mm, 5 pcs

Набор для полирования N1, ПЕТРОГРАДЪ, кожа 200мм*70мм, 5 штук. Набор кожаных накладок предназначен для доводки столярного и плотницкого инструмента, полукруглых резчицких стамесок, скобелей, ножей и другого режущего инструмента.

Производство - Россия

600p
Отзывов: 1
Рейтинг:

Checkering set, type N2, 60°/20lines, 8 tools + gauge, in roll bag

Checkering tool set N2, 8 tools + layout and roll bag for storage. Gouges by Petrograd toolsworks for making checkers. Set of tools with 60 degree cutters, this type is making more open or even flat checkers that grants good grip and less prone to clogging.

Checkering tool set 2 includes:

  • gouge B-2 ( two cutting edges, spacer with tooths )
  • gouge C-1, 60° ( one cutting ed ge )
  • gouge S-1, 60° ( one cutting edge )
  • gouge N2-20, 60° ( two cutting edges )
  • gouge N3-20, 60° ( right router, left cutting edges )
  • gouge N4-20, 60° ( left router, right cutting edges )
  • gouge for corners 60° (or Carving chisel, PETROGRAD, V-type, 60 degrees)
  • Checkering layout guide / butt scribe
  • Checkering gauge
  • Roll bag for carving tools ( 6 pockets )
10450p
Отзывов: 1
Рейтинг:

Фабрика Петроградъ ( Petrograd toolworks )

to up