Mallet PETROGRAD, round, D65mm*250mm, 450 g, bounceless



800 p (12.3) out of stock
Rating :
Avg. value 5 (by rates of 1 users)

Description

Chiseled beech mallets.

Excellent solid wood mallets weighing from 300 g to 750 g.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

Mallets made of beech and covered with tung oil. They have two configurations: solid and filled with balls. Metal balls (lead shot) in the mallet act as a weighting agent, and also reduce recoil upon impact. Mallets are widely used when working with bits and chisel chisels when cutting connections, as well as when carving large items or sculptures. 

Model Item code solid filled with balls
Mallet PETROGRAD, round, D65mm*250mm, 300 g М00014036 +  
Mallet PETROGRAD, round, D65mm*250mm, 450 g, bounceless М00014037   +
Mallet PETROGRAD, round, D95mm*300mm, 600 g М00014074 +  
Mallet PETROGRAD, round, D95mm*300mm, 750 g, bounceless М00014075   +

 


Share / Save Link:

Specs

Reviews

Instructions ()

Нет файлов

Publications

Set of bench chisels PETROGRAD. The length of the blade - from 120mm to 160mm; width - 8mm, 10mm, 16mm, 32mm. Overall length - from 250mm to 295mm.These chisels have a classic design with blades that are bevel-edged to a narrow land on each side, providing excellent clearance when trimming into an angled corner such as in dovetail work, as well as reducing sidewall friction when working in a tight recess. Chisels are made focusing on the experience of old masters of woodworking. The blade is made of high-alloyed chrome-manganese steel and hardened to 60HRc. Comfortable hornbeam handle. The handle at the junction with the blade reinforced brass ring with leather gasket. 

5 770p

This tool roll is designed to store short chisels and knives in an amount of up to 6 pieces. The bag is made of black cotton fabric. The maximum tool length is 180 mm. The length of the tool roll in expanded form -360mm. Compartment for chisels has a strap - to close the cutting part of the knives. Lacing is provided for fixing the twist bag. Made in Russia.

500p
%

Water stones. Grain size: 150, 360, 500, 1000, 1500 and 2000. Size 15х15х120mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Made in Russia.

To select and order an abrasive stone of desired grain size, click on the name of the product.

450p
%

Water stones. Grain size: 150, 360, 500, 1000, 1500 and 2000. Size 15х15х120mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Made in Russia.

To select and order an abrasive stone of desired grain size, click on the name of the product.

520p
%

Water stones. Grain size: 150, 360, 500, 1000, 1500 and 2000. Size 15х15х120mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Made in Russia.

 

540p

Traditional wooden plane. The shoe is made of maple with brass insert for reliable fixation of the blade, the sole is made of hornbeam. The wedge is also made of maple, easy to install and remove. The installation angle of the blade is 50 °.

The plane blade is made of steel 9ХС (DIN - 150Cr14). Hardened to 59-61 HRC. Dimensions: total length 175 mm, width 60 mm, thickness minimum 3.5 mm, thickness maximum 5 mm.
All blades are wedge-shaped with a wedge angle of 0.5 degrees, which favorably distinguishes them from others, and are ideally suited for wooden planes with wedge fixation.
Blades have two sides - one is hard, the other is soft (production feature)
Absolutely every blade is tested with a hardness tester.
The solid side has 2 points from the diamond cone - the test, and the control test.

The manufacturer reserves the right to change the thickness and appearance of the knife without degrading the working qualities of the tool.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

 

7 000p

Classy axe for cutting meat. Forged tempered blade has a hardness of 58-60HRc. The axe is made of 9XC (DIN - 150Cr14) alloyed tool steel. Half round cutting edge. Sharpening 30 degrees. The axe handle is made of maple wood, covered with tung oil and has a curved finish.Fixed to the cross with two wooden wedges. Comes with a leather case with a fixation on the buttons.

The width of the forging is 220 mm, the ax handle is 370 mm long, the total length is 450 mm, and the weight is 2000 g.

Totally hand made at PETROGRAD factory of joinery and carpentry tools.

Made in Russia.

12 000p

Forged chisels PETROGRAD Istra with a straight cutting edge and a wooden handle is designed for hard work. The basis for the manufacture of chisels Istra was taken the form of old Russian chisels from the museum rubankov.net, and also takes into account the company's long-term experience in the development of professional carpentry and carpentry tools Barr Specialty Tools. The blade is forged manually from steel ШХ15 (USA 52100, G52986, J19965; Germany 1.3505, 100Cr6, 102Cr6) and hardened to  55 ... 58 HRC. They are intended for processing deep grooves in logs and timber as an indispensable tool for the construction of frame structures in the style of timber frame, post-and-beam half-timbered, fachwerkhaus, Log house. Fastening to the handle with a conical socket. The thickness of the blade at the neck is 11 mm, the thickness in the area of the descent is 7 mm. The handles are made of ash and crimped with a stainless ring to harden the butt when working with a mallet or hammer. Available in widths of 25 mm, 38 mm, 40 mm and 50 mm. Blade length 200-250 mm, full length 320 mm. The wedge-shaped blade prevents jamming in the wood.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

6 800p

The blade for wooden planes. Ьade of steel 9HS (DIN - 150Cr14), hardened to 59-61 HRC. It has dimensions: total length 175 mm, width 65 mm, thickness minimum 3.5 mm, thickness maximum 5 mm.
All blades are wedge-shaped with a wedge angle of 0.5 degrees, which favorably distinguishes from others, and is ideal for wooden planes with wedge fixation.
Blades have two sides - one hard, one soft (production feature)
Absolutely every blade is tested with a hardness tester.
The solid side has 2 points from the diamond cone - the test, and the control test.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

1 200p

Rezchitsky fingertip, PETROGRAD. Designed to protect hands from mechanical damage. Protects your fingers from cuts when moving the cutting tool towards you, and prevents the formation of calluses when working away from yourself. It has a special ring that prevents it from slipping during operation. The thimble is made of 2mm soft leather, which provides good protection for the toe.

Production - factory of joinery and carpentry tools PETROGRAD.
Made in Russia.

500p