Books & magazines


Woodcarving drawknife PETROGRAD, straight I-shaped, 130mm

The flat straight drawknife is designed for woodworking, wood carving, as well as for carpentry. Handles are in the same plane as the blade that allows easy control of the tool. The 3.5 mm thick blade has a straight cutting edge, made of carbon steel 65G (Germany 66Mn4, Ck67, USA 1066) and hardened to 57-59 HRC. Handles 100mm long made of maple, impregnated with oil and reinforced with a brass ring. Blade length - 135 mm, width 20 mm. Sharpening angle - 30grad. Includes leather case to protect the blade. Totally hand made at PETROGRAD factory of joinery and carpentry tools.

Made in Russia.

Отзывов: 1

Leather Knife PETROGRAD, type 1, single stright bevel

Straight and flat leather Knife type 1 with a single bevel (up or right). This model has one flat side and one bevel side. It's simple knife for paring and skiving.

  • for straight cuts
  • for skiving
  • for paring

Flat Leather knife type 1 by Petrograd toolworks comes with a leather sheath. Edge is perfectly sharpened and ready to work out of the box.
This type of knives is used in handicraft, leather work, and shoemaking.

  • blade made of tool alloy steel 9ХФ
  • blade thickness - 1.7 mm
  • edge lenght - 40 mm
  • blade lenght - 70mm
  • handle made of wood *
  • oil covered **
Отзывов: 1

Shallow Hook Knife, PETROGRAD, type 3, left-handed

Hook knife is used for cutting out a hollow in a wooden spoon or scoop, as well as for other similar work. Shallow hook knife N3 has a water drop profile of blade. That's making it perfectly choose for cut wooden spoons bowl. The left version of knife is designed to work with the left hand towards yourself or right hand to outside.

  • Knife blade width - 12mm.
  • Hook cutter length - 235 mm
  • Handle length - 160 mm
  • Hook knife blade made from tool steel and hardened up to 58-60HRC.
  • All hook cutters are sharpened and ready to go.
  • The outerside of the hook is ring-shaped and perfectly polished. Thats allow you to cut wood cleanly and smoothly without scoring.
  • The handle of the hook knife is made of maple and coated with oil.

The right version of hook knife is designed to work with the right hand towards yourself, the left version - with the left hand towards yourself.
Made by Petrograd toolworks in Saint-Petersburg Russia.

Отзывов: 1

Leather fingertip for woodcarvers

Leather fingertip is a thumb guard for wood carvers by Petrograd toolworks. Designed to protect hands from sharp tools. Thumb guard protects your finger from cut injuries when you are moving the cutting tool towards thumb, and prevents the formation of calluses when working away from yourself. Watch pictures for more info.

  • made of 2mm leather
  • easy to use
  • save you from injures

Guard has a special ring that prevents it from slipping during operation. The thimble was made of 2mm soft leather, which provides good protection for the toe.

Thumb guard was made by Petrograd toolworks in Saint Petersburg Russia

Отзывов: 1

Sharpening set PETROGRAD N6, for woodworking tools, 3 stones

Набор заточной ПЕТРОГРАДЪ N6, для столярных инструментов, 3 камня (рекомендован Ф.А.Бондаревым). Зернистость: 800, 4000 и 6000. Размер 200х70х20мм. Абразивное зерно - карбид кремния. Связка - керамика. Твёрдость I обеспечивает минимальный износ камня при работе. При заточке не перегревается сталь. Не требует использования масла. Перед использованием замочить в воде на 2-10 мин. Используются для заточки и задания скосов.  Абразивный камень Петроградъ Бриз #4000, водный камень на основе кварцевого зерна 3мкм. на керамической связке, имеющий в маркировке указание зернистости по Jis.
Камни 3000 и 6000грит производятся в  Япония, по заказу фабрики ПЕТРОГРАД. Ориентированы под наши размеры.

С марта 2016 года для брусков, выпускаемых под торговой маркой " Петроградъ" будет применяться новая маркировка характеристики.
Формат кода характеристики: "Материал"_"Зернистость"_"Связка"_"Твёрдость"

Отзывов: 1

Diy Prefab Houses by Beamer Will

A master's book with forty years of experience is a beginner's guide to building houses and other structures with a time-tested timber frame. The book describes how to build a house in a specific style, this style is called Timberframe.
Unlike modern frame houses, such structures have served faithfully for many generations. There is everything here to learn how to build durable frame buildings with your own hands.

The basics of design
Materials and tools
Clear and detailed step-by-step instructions
Photos and drawings illustrating each step of the construction.
Отзывов: 1

Vologda Knife, type 1

Нож рабочий ПЕТРОГРАДЪ, серия Вологда, модель N1 – это нож для резьбы по дереву, используемый в том числе при создании деревянных ложек. Производство фабрика Петроградъ (Россия).

Отзывов: 1

Cabinetmaking Corner Chisel, PETROGRAD

Стамеска угловая столярная ПЕТРОГРАДЪ. Используется для окончательной обработки пазов и углов 90 градусов. Отполированное полотно стамески. Производство фабрика Петроградъ (Россия).

Отзывов: 1

Set of PETROGRAD chisels, Volga type, 4 items in roll (8, 12, 20, 23mm)

Набор стамесок ПЕТРОГРАДЪ, серия Волга, 4 штуки (8, 12, 20, 32), в сумке-скрутке. Данный набор собран специально таким образом, чтобы с его помощью вы смогли выполнить максимально широкий спектр задач. В набор были помещены самые востребованные размеры стамесок (8, 12, 20, 32) мм. Производство фабрика Петроградъ (Россия).

Отзывов: 1