Мастерски открываем лето на Фестивале Столярного Дела 2024 в Москве!

Первые дни июня ознаменуются грандиозным событием для всех любителей и профессионалов столярного искусства — Фестиваль Столярного Дела пройдет 1-2 июня 2024 года в центральном выставочном комплексе ЭКСПОЦЕНТР на Краснопресненской набережной в павильоне номер 5.
Это уникальная возможность познакомиться с новейшими технологиями и классическими приемами обработки дерева, узнать о последних инновациях в инструментарии и оборудовании, а также приобрести всё необходимое для своей мастерской прямо на месте.

На Фестивале будет представлено 40 компаний участников и более 55 частных мастерских, каждый из которых поделится своим уникальным мастерством и опытом в работе с деревом.

Насыщенная программа мероприятий: Мастер-классы ведущих столяров, плотников и резчиков по дереву; живые демонстрации работы на различных деревообрабатывающих станках; интерактивные соревнования, такие как "Корытная битва" и Топоринг/Заруба, аукцион уникальных работ мастеров.
Особенный интерес вызовет конкурс "Авторская шкатулка", где каждый участник конкурса представит своё мастерство перед компетентным жюри и посетителями фестиваля - голосование пройдет во время фестиваля.

Участники фестиваля — это как известные бренды, так и независимые мастерские, каждый из которых представит свои лучшие работы и продукцию. Среди них компании, специализирующиеся на производстве рубанков, столярных инструментов и деревообрабатывающих станков, такие как Петроградъ, Shinwa, Felder-group, Global tools, Jet, Borma и многие другие.

Особое внимание стоит уделить образовательной программе фестиваля: многочисленные мастер-классы от ремесленников позволят каждому желающему не только наблюдать за процессом создания деревянных изделий, но и самому принять участие в резьбе, плетении, токарных работах и других видах столярного искусства.

Билеты на фестиваль доступны на входе, кассы будут работать с 10:00 до 18:00 каждый день фестиваля. Не упустите шанс окунуться в мир столярного искусства и даже приобрести уникальные изделия ручной работы, которые могут стать замечательным дополнением к интерьеру или ценным подарком для друзей и родственников. Подробности доступны на сайте фестиваля.

Приглашаем всех на Фестиваль Столярного Дела 2024: от профессионалов до новичков, каждый найдет что-то полезное и интересное для себя. До встречи на фестивале!

С уважением команда фабрики Петроградъ

Carving knife PETROGRAD, Finnish type, 200mm/60mm

Carving knives with a sharp tip are designed for detailing and working in hard to reach places. Blade length 45mm or 60mm, rounded butt. A comfortable oval redwood handle is saturated with oil and covered with shellac. The length of the handle - 115mm. Excellent knife for both beginners and professionals. The 2.5 mm thick blade is made of high carbon steel hardened to a 59-61 HRc. All the cutters are sharpened and ready to go. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
 
2500p
Отзывов: 1
Рейтинг:

Strop PETROGRAD, two-sided, 200mm*70mm

Double-sided bar with glued leather. The size of the bar is 200x70x25mm. It can be used with polishing pastes. Material - ash, leather - "reversal" 2mm. Skin color may differ from the image on the site. Made in Russia.

1110p
Отзывов: 1
Рейтинг:
new

Carving set PETROGRAD, N2

The set includes:

Carving knife PETROGRAD, Bogorodsky type, 155mm/40mm
Carving knife PETROGRAD, Finnish type, 175mm/60mm
Carving knife PETROGRAD, skew 30 deg, 155mm/40mm
Carving knife PETROGRAD, Swedish type, 175mm/60mm
Spoon knife, PETROGRAD, D 27mm, right-handed
Carving chisel, PETROGRAD, 10mm
Textile 6 pocket Tool Roll, PETROGRAD, 360*260mm, for carving knives

The tools are made of steel 65G (Germany 66Mn4, Ck67, USA 1066) and have handles made of beech and maple covered with tung oil.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

15000p
Отзывов: 1
Рейтинг:

Bent Gouge Rubankov, N6, 20mm

Bent Gouge Rubankov, N6, 20mm (0.79 inches)

Carving chisel "Rubankov" Bent Gouge N6, 20mm ( 0.79 inches ). Perfectly suits for volume carving and deep hollow carving. The width of the cutting edge is 20mm ( 0.79inches ). The total lenght of the gouge is 425mm ( 16.73inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 280mm (11.02inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.

Gouge is sharpened, honed and fully ready to work out of the box.
This model is for hand cutting and can be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )

5200p
Отзывов: 1
Рейтинг:

Checkering tool complete B-3

Checkering tool B-3 is a single blade with teeth. Profile cutter convex semicircular designed to perform the edging pattern. The tool leaves a concave semicircular groove. Good for beginners, as forgiving some mistakes in the work. All cutters are made of steel, underwent a process of hardening and processing, for long and reliable work. The wooden handle is made of beech, well balanced and lies comfortably in your hand. Pay attention to the high relief, providing fast and smooth cutting. The tines provide good removal of all hardwoods.
A cutter is just the same as cutting deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Smoothly each groove is obtained. maximum groove depth 2.8 mm, width 2.8 mm.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

850p
Отзывов: 1
Рейтинг:

Checkering tool complete C-1, 90°

Checkering tool C-1 has 1 pyramidal tooth. Angle top 90 degrees. All the cutters are made of steel, undergone the process of hardening and processing, for long and reliable work.
It is V-shaped with teeth on both sides. Checkering tool C-1 is designed for applying the original layout of the picture, as well as for deepening the grooves after their application, with other cutters.
The wooden handle is made of beech, well balanced and lies comfortably in your hand.
Pay attention to the high relief, providing fast and smooth cutting. The tines provide good removal of all hardwoods.
The cutter doesnt look like cutting - deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Equal each element is obtained.

The width of the working part is 5 mm, the length of the working part is 11 mm, the apex angle 90 degrees.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

850p
Отзывов: 1
Рейтинг:

Carving set PETROGRAD, N4, 6 knives

Carving set PETROGRAD, N4, 6 knives
The set includes:
Carving knife PETROGRAD, Bogorodsky type, 155mm/40mm
Carving knife PETROGRAD, Finnish type, 160mm/45mm
Carving knife PETROGRAD, skew 40 deg, 145mm/40mm
Carving knife PETROGRAD, Swedish type, 175mm/60mm
Spoon knife, PETROGRAD, D 27mm, right-handed
Carving knife PETROGRAD, model Parrot, 165/25mm
Textile 6 pocket Tool Roll, PETROGRAD, 360*260mm, for carving knives

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

15000p
Отзывов: 1
Рейтинг:

Sharpening stone PETROGRAD, 200*70*20mm, 4000 grit

Water stone. 2000 grit. Size 200*70*20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Used for sharpening and setting bevels.

High sharpening performance, second only to diamond, is ensured by the use of silicon carbide abrasive grains, which are notable for their sharpness and brittleness. The high hardness of carbide-silicon grinding materials allows you to confidently process not only carbon steels, but also hard alloys, which is impossible on stones made of electro-alumina powders. In addition to performance, it is worth noting the extraordinary tactile sensations when sharpening a tool. Stones quickly give a slurry and produce a very pleasant sound.

Water stones PETROGRAD are distinguished by high performance and geometry in a state of delivery.
In the characteristic of a water stone are specified: the first letter - hardness (I, J - soft, K - average); Japanese grain size according to JIS R6001-1987 is 150 (80 microns), 360 (34 microns), 500 (24 microns), 1000 (12 microns), 2000 (6 microns) and C is silicon carbide.

Comparison of FEPA, JIS and GOST standards:

 

 

 

3440p
Отзывов: 1
Рейтинг:

Leather strops PETROGRAD, 200mm*70mm, 5 pcs

Набор для полирования N1, ПЕТРОГРАДЪ, кожа 200мм*70мм, 5 штук. Набор кожаных накладок предназначен для доводки столярного и плотницкого инструмента, полукруглых резчицких стамесок, скобелей, ножей и другого режущего инструмента.

Производство - Россия

900p
Отзывов: 1
Рейтинг:

Sharpening stone PETROGRAD, 200*70*20mm, 2000 grit

Water stone. 2000 grit. Size 200*70*20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Used for sharpening and setting bevels.

High sharpening performance, second only to diamond, is ensured by the use of silicon carbide abrasive grains, which are notable for their sharpness and brittleness. The high hardness of carbide-silicon grinding materials allows you to confidently process not only carbon steels, but also hard alloys, which is impossible on stones made of electro-alumina powders. In addition to performance, it is worth noting the extraordinary tactile sensations when sharpening a tool. Stones quickly give a slurry and produce a very pleasant sound.

Water stones PETROGRAD are distinguished by high performance and geometry in a state of delivery.
In the characteristic of a water stone are specified: the first letter - hardness (I, J - soft, K - average); Japanese grain size according to JIS R6001-1987 is 150 (80 microns), 360 (34 microns), 500 (24 microns), 1000 (12 microns), 2000 (6 microns) and C is silicon carbide.

Comparison of FEPA, JIS and GOST standards:

2560p
Отзывов: 1
Рейтинг: