Share / Save Link:

Набор клиньев для раскалывания брёвен, ПЕТРОГРАДЪ, 4 штуки



Rating : (1)
Shipping: worldwide

9960 p (153.18)

Description

Набор клиньев для раскалывания брёвен, ПЕТРОГРАДЪ, 4 штуки. Предназначен для аккуратного расклинивания брёвен на плахи для дальнейшего их использования в различных ремесленных проектах: производство чаш, ложек и другой деревянной посуды, деталей стульев и другой мебели. Производство – фабрика Петроградъ (Россия).

Характеристики набора:

  • В наборе 4 клина
  • Сталь: 65 Г
  • Закалка: 57-59 HRC
  • Упаковка: фанерный кейс

Набор состоит из 4-х клиньев с разными углами клина, длины и формы. Более пологие клинья подойдут для твердых и сложных пород. Набор клиньев позволит расколоть практически любое бревно.

Размеры клиньев:

  1. 0,5кг - 160мм
  2. 0,5кг - 100мм
  3. 0,8кг - 150мм
  4. 1.2кг - 190мм

Стартовый клин устанавливается с первого удара. Он имеет прямую заточку с углом 25град, а также скругленные кромки, что обеспечивает удобство и надежность при удержании в ладони во время работы.

Клинья изготовлены из стали 65Г, режущая кромка закалена и отпущена до твердости 57-59HRC, ударная часть имеет более низкую твердость, чтобы не скалываться при ударах. Для установки клиньев рекомендуем использовать кувалды ПЕТРОГРАДЪ.  Обязательно используйте защитные очки и перчатки при работе с металлическими инструментами.


abc checkFind out a mismatch? Highlight text and press Ctrl/Cmd + Enter

Share / Save Link:

Specs

Reviews

Instructions ()

Нет файлов

Publications

Recommended products

new

Petrograd Sledge hammer 2.5 kg

Кувалда кованая, ПЕТРОГРАДЪ, 2.5кг. С плоским и полукруглым бойком. Рукоять выполнена из ясеня. Покрыта маслом. На рукояти выполнена обмотка из натуральной кожи. Производство фабрика Петроградъ (Россия).

7300p(153.18)
Отзывов: 1
>Рейтинг:

Carpenter drawknife PETROGRAD N3, half round, R60, 170mm, Russian type

A semicircle drawknife N3 with arms curved upwards will be convenient for various operations in the carpentry: precise fit of the logs to size, quick material removal, as well as a selection of recesses. Made in Saint Petersburg Russia.

  • blade was forged manually
  • made of tool steel 65G (Germany 66Mn4, Ck67, USA 1066)
  • hardened to 55-58 HRC
  • blade curvature radius - 60mm
  • sharpening - lenticular.

The design of the drawknives N3, as well as it sharpening, is recommended by the Russian Carpenters Union for debarking and carpentry work on fitting logs. Other kind of carpentry work may require regrinding. Blade was fully hardened through, it allows you to repeatedly honing the blade or his fully re-grind it.

  • handles are 140mm long
  • made of beech and covered with oil

  • length of the blade - 170mm
  • blade width - 36 mm.
  • Blade thickness - 6mm
  • sharpening angle - 30grad
  • Comes with a leather case with a clasp on the buttons.

*The sizes of the staple in the batch may vary slightly.

Drawknife N3 specifications:
Blade lengh: 170 mm
Steel:  65G steel
Shape: semicircle
Handle lenght: 140 mm
Weight: 0,5 kg
5100p
Отзывов: 1
Рейтинг:

Carving knife PETROGRAD, skew type, 30 degrees

Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ. Ножи-косяки с углом скоса 30, 40 градусов двухсторонняя заточка. Длина лезвия -  40 мм, ширина 13 мм, прямой обух. Удобная овальная рукоять из красного дерева пропитана маслом и покрыта шеллаком. Длина рукояти - 140 мм. Нож для широкого спектра работ. Лезвие толщиной 2,5 мм выполнено из стали 65Г с закалкой до твердости 59-61 HRc. Заточен и готов к работе. 

Сделано в России

2400p
Отзывов: 1
Рейтинг:

Strop PETROGRAD, one-sided, 200mm*70mm

One-sided bar with glued leather. Bar size - 200x70x22mm. It can be used both with polishing pastes and without them. Material - ash, leather - smooth - 2mm. On the non-working side, anti-slip silicone feet are glued. Skin color may differ from the image on the site. Made in Russia.

970p
Отзывов: 1
Рейтинг:

Carving knife PETROGRAD, skew type, 40 degrees

Carving knives with a bevel angle of 30, 37, 40 degrees double-sided sharpening. Blade length - 40 mm, width 13 mm, straight butt. A comfortable maple oval handle is saturated with oil and covered with shellac. The length of the handle - 115 mm. Knife for a wide range of works:

- marquetry, intarsia, veneering

- leather crafts

- production of musical instruments

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

Model Code Handle Blade lenght Blade width  Scew angle Total lenght
Carving knife PETROGRAD, skew 30 deg, 155mm/40mm M00013393 maple 35 23 30 145
Carving knife PETROGRAD, skew 37 deg, 140mm/40mm M00013990 maple 35 35 37 160
Carving knife PETROGRAD, skew 40 deg, 145mm/40mm M00014065 sapele 30 20 40 165

 

 

2400p
Отзывов: 1
Рейтинг:

Carving knife PETROGRAD, model Parrot

The tool has a hooked shape similar to a parrot's beak with a working part of 26 mm. They have a wide range of applications for carving, are one of the main knives in geometric thread, and are also convenient and in demand using the Whittling carving technique. The knife is made of steel 65G (Germany 66Mn4, Ck67, USA 1066) and have maple handles coated with tung oil. Sharpening angle - 20 degrees, blade thickness - 1.7 mm.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia

2400p
Отзывов: 1
Рейтинг:

Checkering tool complete B-1

Checkering too B-1, is a 2 conical cutter with a working angle of 90 degrees, separated by a wide groove with teeth. A tool for making the roller around the notch. Pay attention to the high relief, providing fast and smooth cutting. The tines provide good removal of all hardwoods.

A cutter is just the same as cutting deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Smoothly each groove is obtained.

Maximum roller height 1 mm, width 2.5 mm
Made in Russia.

850p
Отзывов: 1
Рейтинг:

Checkering tool complete C-1, 60°

Резец C-1, имеет 1 пирамидальный зуб. Угол вершины 90 и 60 градусов. Резец продается в сборе, имеют удобную рукоять из бука и шток с установленной на нем рабочей частью. Все резцы изготовлены из стали, прошли процесс закалки и обработки, для продолжительной и надежной работы.
Имеет V-образную форму с зубцами по обе стороны. Резец С-1 предназначен для нанесения оригинального макета рисунка, а также для углубления канавок после их нанесения, другими резцами.
Деревянная рукоятка хорошо сбалансирована и удобно лежит в руке.
На фотографии детально показаны зубцы. Обратите внимание на высокую рельефность, обеспечивающую быструю и ровную нарезку. Зубцы обеспечивает хорошее удаление всех твердых пород древесины.
Резцу все равно, что вырезать глубокие или мелкие пазы, прямые или закругленные углы, параллельные линии или перекрестную штриховку, по направлению волокна или поперек. Не нужно заново делать проход, чтобы обработать неровные участки. Ровной получается каждый элемент.

Ширина рабочей части 5 мм, длина рабочей части 11 мм, угол вершины 90 и 60 градусов.

Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ.

Сделано в России

850p
Отзывов: 1
Рейтинг:

Bench Chisel, PETROGRAD, model Istra short, 40mm

Forged carpentry short chisels Istra with a straight cutting edge and a wooden handle, has designed for hard work. The basis for the manufacture of chisels Istra was taken the form of old Russian chisels from the old tools museum Rubankov, and also takes into account long-term experience in the development of professional carpentry and carpentry tools of other toolworks.

The blade has forged manually from steel ШХ15 (USA analog is 52100, G52986, J19965; Germany  analog of 1.3505, 100Cr6, 102Cr6) and hardened to 61-63HRC. Carpentry chisels are intended for timber framing for processing deep grooves in logs and timber as an indispensable tool for the construction of frame structures in the style of timber frame, post-and-beam half-timbered, fachwerkhaus, Log house.

  • Chisel blade fastened to the handle with a conical socket.
  • The thickness of the blade at the neck is 11 mm, the thickness in the area of the descent is 7 mm.
  • The handles are made of ash and crimped with a stainless ring to harden the butt when working with a mallet or hammer.
  • Available in widths of 19 mm, 25 mm, 38 mm, 40 mm and 50 mm ( see full catalogue).
  • Blade length 290 mm, full length 400 mm.
  • The wedge-shaped blade prevents jamming in the wood.

Carpentry chisels Istra are totally hand made at PETROGRAD toolworks of joinery and carpentry tools. Made in Saint-Petersburg Russia.

Chisel Specification:
Weight: 0.71 kg
Type: Short chisel
Steel: ШХ15
Handle material: Ash*
Handle lenght: 110 mm
Edge: Straight
Edge width: 40 mm
Blade lenght: 290 mm
Total lenght: 400 mm
 *material of handles may changes from batch to batch.
7900p
Отзывов: 1
Рейтинг:

Outdoor axe PETROGRAD, model Roslavl 7, scandy bevel, handle n11

Hand forged outdoor axe Roslavl VII with curved handle. Axe as a woodworking tool has superior cutting abilities, short handle and would be good choiсe for any outdoor activity like campings, spoon making, making bonfire and etc. This axe is ideal for those who want take a small axe for different ways of use when you are going out and about in the countryside. Although it is light, it can be used to fell a small or even midle tree, thanks to its handle and heavy, strong head. The axe is also excellent for delimbing a tree and making wooden stakes.

  • Total lenght is 370mm ( 14,57inch )
  • Height of axe is 140mm ( 5,51inch )
  • Lenght of cutting edge is 120mm ( 4,72inch )
  • Axe is hand forged from 65G steel (Germany 66Mn4, Ck67, USA 1066).
  • Curved cutting edge was straight sharpened.
  • Total weight of axe is 0,7kg  ( ± 0,05kg )
  • Handle lenght is 320mm ( 12,6inch) and it is made from solid mapple with right grain position.
  • The axe comes with leather case for protecting cutting edge.

Axe is well balanced and would be a good choice for a lot types of work. It will be great as outdoor axe, for small carpentry and othe woodwork projects. This is kind of universal axe for everyone.

Axe Roslavl VII produced by Petrograd toolworks in Saint Petersburg Russia.

Axe Roslavl VII Specifications:
Head weight: 0.63 kg
Full weight: 0.7 kg
Type: outdoor hatchet
Steel: 65Г
Hardness: 55-58HRc
Handle material: Ash*
Handle lenght: 320 mm
Edge: Curved
Sharpening angle: 30 degrees
Blade lenght: 120 mm
Total lenght: 370 mm
 * material of handles may changes from batch to batch.
** coating oil may changes too
11000p
Отзывов: 1
Рейтинг:

Sharpening stone PETROGRAD, 153*15*15mm, 1500 grit

Sharpening stone PETROGRAD. Granularity: 150, 360, 500, 800, 1000, 1500 and 2000. Size 15x15x153mm. The abrasive grain is silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during work. When sharpening, the steel does not overheat. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Manufactured in Russia.

760p
Отзывов: 1
Рейтинг: