Нож разметочный ПЕТРОГРАДЪ, модель N3, с гибким клинком, скошенный

Share / Save Link:

Marking knife PETROGRAD, model N3, flexible, skew form



900 p (12.49) out of stock
Rating :
Avg. value 0 (by rates of 0 users)

Description

Ножи разметочные ПЕТРОГРАДЪ, модель N3, с гибким клинком из стали 60СГ2А идеальный инструмент для разметки соединений Ласточкин Хвост.

Kроме разметочных операций, могут использоваться для разных видов работ:

                - для резки шпона  в качестве ножа для маркетри

                - для резки кожи в качестве косого шорного ножа

                - для резки глины и пластилина

 

Нож со скошеным клинком
Угол скоса - 45°. заточка лезвия с углом - 30°. Толщина клинка - 0.73мм, ширина - 9мм. Длина клинка - 40±2 мм, длина ножа - 200±2 мм. Рукоять выполнена из древесины сапеле покрыта маслом.

Производство Петроград (Россия)


l

Share / Save Link:

Specs

Reviews

Instructions ()

Нет файлов

Publications

Bench chisel PETROGRAD. The length of the blade 120mm; width - 16mm. Overall length 250mm.These chisels have a classic design with blades that are bevel-edged to a narrow land on each side, providing excellent clearance when trimming into an angled corner such as in dovetail work, as well as reducing sidewall friction when working in a tight recess. Chisels are made focusing on the experience of old masters of woodworking. The blade is made of high-alloyed chrome-manganese steel and hardened to 60HRc. Comfortable hornbeam handle. The handle at the junction with the blade reinforced brass ring with leather gasket. 

1 340p

Bench chisel PETROGRAD. The length of the blade 120mm; width - 20mm. Overall length 250mm.These chisels have a classic design with blades that are bevel-edged to a narrow land on each side, providing excellent clearance when trimming into an angled corner such as in dovetail work, as well as reducing sidewall friction when working in a tight recess. Chisels are made focusing on the experience of old masters of woodworking. The blade is made of high-alloyed chrome-manganese steel and hardened to 60HRc. Comfortable hornbeam handle. The handle at the junction with the blade reinforced brass ring with leather gasket. 

1 370p

Set of bench chisels PETROGRAD. The length of the blade - from 120mm to 160mm; width - 6mm, 8mm, 10mm,12mm, 16mm, 20mm, 26mm, 32mm, 40mm, 50mm. Overall length - from 250mm to 295mm.These chisels have a classic design with blades that are bevel-edged to a narrow land on each side, providing excellent clearance when trimming into an angled corner such as in dovetail work, as well as reducing sidewall friction when working in a tight recess. Chisels are made focusing on the experience of old masters of woodworking. The blade is made of high-alloyed chrome-manganese steel and hardened to 60HRc. Comfortable hornbeam handle. The handle at the junction with the blade reinforced brass ring with leather gasket. 

14 970p

Set of firmer gouges PETROGRAD. The length of the blade from 120mm to 135mm; width -, 8mm, 10mm, 12mm, 16mm, 20mm, 26mm. Overall length - from 250mm to 295mm. The blade is made of high-alloyed chrome-manganese tool steel and hardened to 60HRc. The handle is made of hornbeam wood. The handle at the junction with the blade reinforced brass ring with leather gasket. Radius surfaces - black. Comfortable tool roll.

12 730p

A flat drawknife with curved and perpendicular cutting edge with handles will be convenient for various operations both in woodworking and carpentry: precise fit of logs in size, manufacture of seats, quick material removal in joinery, etc. Handles are raised above the blade plane and allow work closely to the treated surface. The blade is forged manually from tool steel 65G (Germany 66Mn4, Ck67, USA 1066) and hardened to 55-58 HRC. Sharpening - chamfering up. Handles 140 mm long are made of beech and impregnated with oil. Blade length - 170 mm, width 36 mm. Blade thickness - 6 mm, sharpening angle - 30 degrees. Comes in a leather case with a clasp on the buttons. The design of the drawknives, as well as their sharpening, is recommended by the Russian Carpenters Union for debarking and carpentry work on fitting logs. Other kinds of carpentry work may require regrinding.Blade was fully hardened through, that allows you to repeatedly honing the blade or his fully re-grind it. Totally hand made at PETROGRAD factory of joinery and carpentry tools.

Made in Russia.

3 300p

Flat U-shaped drawknife is designed for joinery, woodcarving, as well as for carpentry. Ideal for making Windsor chairs. Handles are in the same plane with the blade that allows easy control of the tool, and their direction at an angle to the cutting edge allows for less stress on the wrists.. The 3.5 mm thick blade has a straight cutting edge, made of carbon steel 65G (Germany 66Mn4, Ck67, USA 1066) and hardened to 57-59 HRC. Handles 100mm long made of maple, impregnated with oil and reinforced with a brass ring. Blade length - 135 mm, width 20 mm. Sharpening angle - 30grad. Includes leather case to protect the blade. Totally hand made at PETROGRAD factory of joinery and carpentry tools.

Made in Russia.

 

3 000p
new

Spoon knife (shallow hook knife).
Used to made a wooden spoons, as well as for other similar works.
The blade width is 8mm, the inner radius of the ring is 15mm. The outer side of the ring has a convex lens-like shape and is polished, which, together with the small width of the blade, allows you to cleanly and smoothly cut wood without scoring and steps.
The total length of the knife is 175 mm; the length of the handle is 130 mm.
Made of  9ХС (150Cr14, 90CrSi, 90CrSi5) steel, hardened to 58-60HRC.The convenient ergonomic oval handle of the knife is made of maple and impregnated with oil.
All knives are sharpened, finished and fully ready for work.
The right-handed version is designed to work with the right hand towards itself, the left-handed version - with the left hand towards itself.
Totally hand made at PETROGRAD factory of joinery and carpentry tools.
Made in Russia

2 100p

Power awl PETROGRAD has a twisted square blade profile that allows you to mark the center of the holes and do not stray under the influence of wood fibers. The blade is made of carbon steel and hardened in oil to HRC 55-60. Its length is 80mm, the cross section is 5mm x 5mm. The shape of the handle allows you to abut the whole palm, compressed by a brass ring. Handle material - maple, impregnated with linseed oil. Full length 165mm. Totally hand made at PETROGRAD factory of joinery and carpentry tools.
Made in Russia

760p
new

Mallet PETROGRAD, "barrel", striker size - mm D85
Excellent all-wooden mall weighing 500 g (error + -30 g)
The mallet is made of beech and covered with tung oil. The mallet has a barrel shape and a comfortable, chiseled, ergonomic handle. The handle is fixed on a wooden wedge. Mallets are widely used when working with bits and chisel chisels when cutting connections, as well as when carving large items or sculptures (work from the hammer).
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

770p
new

Checkering tool C-1 has 1 pyramidal tooth. Angle top 60 degrees. All the cutters are made of steel, undergone the process of hardening and processing, for long and reliable work.
It is V-shaped with teeth on both sides. Checkering tool C-1 is designed for applying the original layout of the picture, as well as for deepening the grooves after their application, with other cutters.
The wooden handle is made of beech, well balanced and lies comfortably in your hand.
Pay attention to the high relief, providing fast and smooth cutting. The tines provide good removal of all hardwoods.
The cutter doesnt look like cutting - deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Equal each element is obtained.

The width of the working part is 5 mm, the length of the working part is 11 mm, the apex angle 60 degrees.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

950p