Share / Save Link:

Straight Gouge Rubankov, N3, 12mm



Rating :
(1)
Shipping: worldwide

2900 p (44.6)

Description

Straight Gouge Rubankov, N3, 12mm

Straight Gouge Rubankov, N3, 12mm (0.47 inches)

Carving chisel "Rubankov" Straight Gouge N7, 12mm (0.47 inches). This is universal chisel that perfectly suits for carving hard and soft wood. The width of the cutting edge is 12mm ( 0.47 inches ). The total lenght of the gouge is 280mm (11.02inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 135mm (5.31inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.

Gouge is sharpened, honed and fully ready to work out of the box.
This model is for hand cutting and can be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )


Share / Save Link:

Specs

Reviews

Instructions ()

Нет файлов

Publications

Recommended products

Magazine Master&Workshop 2020 № 2 (9)

Журнал Мастер и мастерская 2020 2 (9)

500p(44.6)
Отзывов: 1
>Рейтинг:

Petrograd carver`s brass mallet , D38mm*53mm

The small brass (bronze) mallet is designed to work with a carving tools. Mark of brass L63, which allows the striker not to crumble, and remain always plastic. Also, the low hardness of brass compared to steel allows you to work with a steel tool without fear of forming a work hardening on the tool. Hammer polished. The handle is made of corrugated Maple, coating - varnish. Handle glued. The mallet was designed by the head of PETROGRAD factory Dmitry Nikolayevich Pushin.

weight of striker 500 g +/- 30 g
full weight of the mallet - 570 g
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

3500p(44.6)
Отзывов: 1
>Рейтинг:

Strop PETROGRAD, for carving tools, 150mm*30mm

The bar with glued leather is designed for finishing semi-circular chisels, drawknives, etc. One of the flat sides can also be used for fine-tuning of flat tools. The size of the bar is 150x30 mm. Min radius - 3 mm, max. radius -6 mm. It can be used with polishing pastes. Material - ash, leather - reversal 2mm. Leather color may differ from the image on the site. Made in Russia.

800p(44.6)
Отзывов: 1
>Рейтинг:

Polishing Paste 2000 grit 180 g

Polishing paste, 2000grit, green, 180g. Waxy polishing pastes in the form of a rectangular bar. Dimensions - 60x60x15mm. Granularity - coarse, medium and fine. Green 2000grit. Weight - 180g. Used for grinding and polishing on wheels, belts, etc. Perfect for hand-held leather bars Petrograd.

Composition: a mixture of grinding powders, binders and auxiliary elements - kerosene, stearin, sodium bicarbonate, silica gel.

Made in Russia.

600p(44.6)
Отзывов: 1
>Рейтинг:

Protective wax for tools, PETROGRAD, 40ml

Защитный воск для ухода за инструментами, ПЕТРОГРАДЪ, 40мл. Воск прекрасный материал для защиты столярных и резчицких инструментов от коррозии. Так же масло подойдет для смазки секаторов, косторезов и ножниц.

300p(44.6)
Отзывов: 1
>Рейтинг:

Butt chisel PETROGRAD 12 mm

Short chisels PETROGRAD are ideal for precision work, for example in the manufacture of finger joints. Blade length - 95mm; width - 6mm, 12mm, 20mm, 26mm,. Total length - from 200mm. Chisels are specially made focusing on the experience of old masters of carpentry. The blade is made of high-alloy chrome-manganese tool steel and hardened to 60HRc. The edges of the web are chamfered towards the edges, but at the same time the edges of the web have a constant thickness. This design allows you to work comfortably in hard to reach places and especially with dovetail connections. The handle is made of hornbeam wood, the size of the handle is 105x30mm. Uncoated handle - the craftsman chooses the finish himself. The handle at the junction with the blade is reinforced with a brass ring with a leather pad There is also a set of chisels in a twist bag.

1100p
Отзывов: 1
Рейтинг:

Carving knife PETROGRAD, model Fish, 185mm/55mm

Carving knives for general use, as well as for large material removal. Blade length 56 mm or 38 mm, beveled butt. Comfortable oval maple handle soaked in oil. The length of the handle - 130mm. Excellent knife for both beginners and professionals. The 1.8 mm thick blade is made of 65G high carbon steel (Germany 66Mn4, Ck67, USA 1066), hardened to 59-61 HRc. All the knives are sharpened and ready to go. Totally hand made at PETROGRAD factory of joinery and carpentry tools.Made in Russia.

1000p
Отзывов: 1
Рейтинг:

Checkering tool complete C-1, 90°

Checkering tool C-1 has 1 pyramidal tooth. Angle top 90 degrees. All the cutters are made of steel, undergone the process of hardening and processing, for long and reliable work.
It is V-shaped with teeth on both sides. Checkering tool C-1 is designed for applying the original layout of the picture, as well as for deepening the grooves after their application, with other cutters.
The wooden handle is made of beech, well balanced and lies comfortably in your hand.
Pay attention to the high relief, providing fast and smooth cutting. The tines provide good removal of all hardwoods.
The cutter doesnt look like cutting - deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Equal each element is obtained.

The width of the working part is 5 mm, the length of the working part is 11 mm, the apex angle 90 degrees.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

1000p
Отзывов: 1
Рейтинг:
%

Checkering tool complete JT, 90°

Checkering tool has 1 pyramidal tooth. Angle top 90 degrees. All the cutters are made of steel, undergone the process of hardening and processing, for long and reliable work.
It is V-shaped with teeth on both sides. Cutter JT is designed for the passage of long lines and correction of existing ones. Due to the length does not go with a given path for which he received the name jointer. The handle is made of beech, well balanced and lies comfortably in your hand.
Pay attention to the high relief, providing fast and smooth cutting. The teeth provide good removal of all hard wood. The cutter is just the same as cutting: deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Every element is smooth.

The width of the working part is 4 mm, the length of the working part is 32 mm, the apex angle is 90 degrees.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

1000p
Отзывов: 1
Рейтинг:

PETROGRAD Faceplate 100mm for Woorturning Lathe M33х3.5mm

Планшайба для токарных работ, Петроградъ, D100мм, М33х3.5мм. Накручивается на шпиндель передней бабки. Резьба М33х3.5мм. Планшайба представляет собой стальной незакаленный диск с соединительной трубой. Она имеет фиксатор, а также сквозные отверстия для крепления заготовок. 

Изготовлен на фабрике столярных и плотницких инструментов ПЕТРОГРАДЪ.
Производство (Россия)

4500p
Отзывов: 1
Рейтинг:

Cutting knife PETROGRAD, Roman type, 160mm, right bevel

Handicraft knife PETROGRAD, Roman type, 160mm, right edge. Right knife. Made of tool steel 58-61HRC. The knife is designed for working with leather. Can be used both for curly cuts and for straight trimming of leather. Full length 160 mm. Width 57 mm. Thickness 3 mm.
Knives have several uses:
- cutting and roughing leather
- in conjunction with a ruler can be used to cut strips
- well cuts thick skin
 
Factory production Petrograd
Made in Russia
1900p
Отзывов: 1
Рейтинг:

Checkering set, type N1, 60°/18lines, 6 tools

Set N1 (60 degrees, 18 lines) includes 6 tools  for making checkers on wood.

Gouges for making checkers. Checkering is a type of woodcarving and decorating handles of knives, rifles. This gouges was based on our expirience of use the variety of worldwide know gouges. Model line includes all base gouges from 16 to 32 lines per inch with angles about 60 and 90 dergrees. All gouges blades can be replaced on new ones and can be purchased separately.

Set number 1 includes:

  • gouge B-2 ( two cutting edges, spacer with tooths )
  • gouge S-1 ( one cutting edge )
  • gouge N2-18, 60° ( two cutting edges )
  • gouge N3-18, 60° ( right router, left cutting edges )
  • gouge N4-18, 60° ( left router, right cutting edges )
  • gouge C-1, 60° ( one cutting edge )
  • Checkering gauge
  • roll bag for carving tools ( 6 pockets )
6900p
Отзывов: 1
Рейтинг:

Non slip mat for sharpening

Коврик для заточки инструмента, 250мм*100мм. Используется для работы с заточными абразивными камнями. Препятствует скольжению абразивных камней по рабочему столу тем самым обеспечивает комфортную работу. Изготовлен из высококачественного силикона толщиной 0,5мм. Легко отмывается от шлама. Предохраняет рабочий стол от царапин и повреждений.

Сделано в России

400p
Отзывов: 1
Рейтинг:

Атлас чертежей к книге 'Практический курс столярного дела', М. Нетыкса

Атлас чертежей к книге "Практический курс столярного дела", М. Нетыкса. Комплект чертежей — 41 лист, формата А3. Автор - М. А. Нетыкса, член Ученого Отдела Общества Распространения Технических Знаний.

1000p
Отзывов: 1
Рейтинг: