Welcome on the pages of the official site of Petrograd-tools. The site contains hand tools produced by the St. Petersburg factory Petrograd (Петроградъ). Today, by our forces we are produce 300 items of carpentry and woodwork forged tools. Each model of the tool is thoroughly tested by our craftsmen and carpenters and joiners communities before setting up to release. We guarantee you the pleasure of working with the tools of the brand Petrograd (Петроградъ).

On the site you can read the description of the tools, find out the characteristics of the Petrograd tools and ask your questions through comment form.
Without a doubt, you can place an order on the website and within a few days (depends of country) you will become the happy owner of the highest quality tools.
We deliver our products around the globe through courier services and transport companies.

Good shopping and sharpen tools! With respectfully, the team of the Petrograd factory (Петроградъ).

carpentry Awl, 165mm, twisted blade 80*5*5mm, PETROGRAD

Carpentry power awl has a twisted square blade profile that allows you to mark the center of the holes and do not stray under the influence of wood fibers.

  • The blade is made of carbon steel and hardened in oil to HRC 55-60
  • Awl blade length is 80mm, the cross section is 5mm x 5mm
  • The shape of the handle allows you to abut the whole palm, compressed by a brass ring
  • Handle material - maple, impregnated with linseed oil
  • Full length 165mm

Carpentrs awl are produced at Petrograd toolworks. Made in Saint Petersburg Russia

900p
Отзывов: 1
Рейтинг:
%

Carving adze PETROGRAD, type N1, half round, external bevel

Wood carving adze by PETROGRAD toolworks.

This adze was developed taking into account the wishes of artisans, as well as our experience in creating carpentry and carving tools. The carving adze is intended for chiseling the internal cavity when creating dishes (trough, broths, cups, bowls, plates, etc.), as well as for roughing the outer surfaces. Scope due to the size of adze.

Developed and designed carving adze - V. Sasin.

The ergonomic handle allows you to securely hold the tool during operation. Expansion at the end of the handle prevents slipping from the hand. The adze handle made of maple and covered with oil. Maple - one of the best wood for the manufacture of handles.

Hand forged blade from steel 65G (Germany 66Mn4, Ck67, USA 1066). Together with the handle has a mass of about 750 grams. Cutting edge sharpening angle - 30 degrees. The width of the working part - 40mm. Cutting edge bending radius - 20mm. If to speak it is applicable to the carving tool  - it is 9 profile.

The eye has a wedge shape. The adze handle slides and splits into 3 wedges.

Sharpening the cutting edge - chamfer outside. It is preferable to use this adze at the finishing stages, for stripping, for smooth formation of the transition from the vertical wall to the flat bottom.

Any carving adze can be used from the beginning to the end. With experience comes the understanding that all three models must be in the arsenal.

Totally hand made at PETROGRAD factory of joinery and carpentry tools.

Made in Russia.

9200p
Отзывов: 1
Рейтинг:
%

Blank blade for moulding plane, `strip`, w/o sharpening, 10mm*180mm

The blank is made of steel 9HS (DIN - 150Cr14), hardened to 59-61 HRC.
All blades are wedge-shaped with a wedge angle of 0.5 degrees, which favorably distinguishes from others, and is ideal for wooden planes with wedge fixation.
Blade have two sides - one hard, one soft (production feature)
Absolutely every knife is tested with a hardness tester.
The solid side has 2 points from the diamond cone - the test, and the control test.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

 

item item code shank width mm minimum shank thickness  mm flag length mm flag width mm flag max thickness   mm overall length mm
Blank blade for moulding plane, "strip", w/o sharpening, 10mm*180mm М00014997  10  3,2  - 10 4,6  180
Blank blade for moulding plane, "flag", w/o sharpening, 16mm*180mm М00015123  10  3,2 40   16 4,6  180
Blank blade for moulding plane, "flag", w/o sharpening, 20mm*180mm М00014666 10 3,2 40 20 4,6 180
Blank blade for moulding plane, "flag", w/o sharpening, 24mm*180mm М00014590 10 3,2 40 24 4,6 180
Blank blade for moulding plane, "flag", w/o sharpening, 30mm*180mm М00014667 10 3,2 40 30 4,6 180
Blank blade for moulding plane, "flag", w/o sharpening, 36mm*180mm М00015124 10  3,2   40 36   4,6 180
800p
Отзывов: 1
Рейтинг:

Carpenter Slick PETROGRAD, model Onega, 60mm

Carpenters Slick "Onega" by Petrograd toolworks is one of best choices for Timber Framing joinery. Slick Onega is a fine combination of weight, balance and splendid sharpening and flatness. All that will give you an extraodinary feeling wile working with our carpentry slicks.

  • blade offset of handle
  • blade width - 60 mm
  • blade lenght - 300 mm
  • blade made of ШХ15 steel (USA 52100, G52986, J19965; Germany 1.3505, 100Cr6, 102Cr6)
  • hardened to 58-61HRc

The blade is hand forged and has off-set from the handle. This allows extra clearance when working on deep mortices or taking long paring cuts.
Made of ШХ15 steel our "Onega" slicks offer a perfect combination of hardness and toughness together with a razor sharp cutting edge.
The back side of blade (near handle) is rounded off to eliminate sharp corners giving extra comfort and security.

  • rased up handle
  • handle lenght 500 mm
  • handle made of ash wood
  • leather pad

All carpentr's slicks Onega comes with leather holster for edge protection. Every Blade is tested for hardness, sharp and ready to work.
This is a complete tool for timber frame joinery and othe heavy duty work.

  • full lenght - 820 mm
  • weight - 1.4 Kg
12100p
Отзывов: 1
Рейтинг:

Outdoor axe PETROGRAD, model Roslavl X, curved handle

Топор кованый ПЕТРОГРАДЪ, Рославль X, изогнутая рукоять. Топор Рославль Х отличается эффектной удлиненной формой полотна. Благодаря такой форме оголова топор можно брать хватом близким к полотну и не бояться повредить руку при работе. Изогнутая рукоять позволяет обеспечивает надежный захват. Плотницкий топор удобен при тёске и ошкуривании бревен. Также топор Рославль X отлично сбалансирован и подойдет для огромного вида работ, как походный топор, для не больших плотницких и столярных работ и просто как универсальный топор.

Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ.
Сделано в России.

11000p
Отзывов: 1
Рейтинг:

Leather Knife PETROGRAD, type 4, right bevel

Ножи шорные ПЕТРОГРАДЪ.
Нож шорный предназначен для раскроя и шерфование кожи. Mожно использовать  для прямолинейного реза и торцевания кожи.
Комплектуются чехлами для защиты режущей кромки и от случайных порезов рук. Производство фабрики ПЕТРОГРАДЪ. 

 

2400p
Отзывов: 1
Рейтинг:

Stanley standart plane blade, PETROGRAD, 51mm * 2.5mm

Replacement blades for Stanley, Record and similar planers are designed to replace a worn blade or expand the capabilities of your tool. They allow replacing native knives on Stanley / Record planers, 4, semi-jointing planes 5.
The piece of iron is made of steel 9XC. Hardened to 59-61 HRC. Knife length - 175 mm, width 50 mm, minimum thickness 2.5 mm.
Each knife is tested with a hardness tester.
The hard side has 2 points from the diamond cone - test, and control test.
The manufacturer reserves the right to change the thickness and appearance of the knife without impairing the working qualities of the tool.
Knives for wooden planers are made at the factory of joinery and carpentry tools PETROGRAD
Production - Russia

3200p
Отзывов: 1
Рейтинг:

PETROGRAD Basket Weaving Tool Kit, n1

For the manufacture of wickerwork from a vine: home furniture and containers for various purposes, such as boxes, baskets, vases and other various utensils. The vine is a natural plant material that can bend easily and keep its shape under normal conditions. Often the material for weaving is willow, rattan and bamboo.
All of the tools are pretty basic, simple, and affordable.
Knives are, of course, the main tools in weaving. But all other tools speed up and improve the quality of weaving, make products of higher quality. Knives are used in different shapes, with a good sharpening, thin blade.
Also, various awls are used to work with weaving. They are needed to work with rows. They allow you to move apart the rows and weave additional elements into them, especially with openwork weaving. The awl should not be sharp so as not to spoil the surface of the rods.
The rows are tapped with an yser or mallet.
The set includes:
Handicraft knife PETROGRAD, oblique sharpening 20 degrees, 20mm / 163mm, universal.
Curved awl for basket weaving D6mm.
Awl for wicker weaving straight D6mm
Mallet for weaving Ysere.
Handicraft knife PETROGRAD, oblique sharpening 60 degrees, 20mm / 187mm, universal.
Handicraft knife PETROGRAD, oblique sharpening 30 degrees, 20mm / 167mm, universal.
Bag-twist fabric, PETROGRAD, model 1, for cutting tools, 6 pockets.

It is also recommended to purchase pruning shears Shogun-355, length 210 mm.

Production of the PETROGRAD factory. Russia

6000p
Отзывов: 1
Рейтинг:
new

Petrograd Carbide Burnisher, type 1, d8mm*135mm

Наводка для цикль, ПЕТРОГРАДЪ, модель 1, рабочая часть D8мм*150мм. Предназначена для наведения грата на столярных циклях. Длинный стержень диаметром 8ии и удобная рукоять будут удобны при наводке как больших фигурных, так и прямых цикль.
1800p
Отзывов: 1
Рейтинг:
new

Marking knife PETROGRAD, model N5, arrow form

Marking knives  PETROGRAD have a swept blade that is sharpened on 2 faces, which makes it comfortable to use both right-handed and left-handed. One-sided sharpening. The 2.3mm thick blade is made of high carbon steel and hardened to 58-61HRC. The handle is made of curly maple and saturated with linseed oil. Before the blade on the handle made a comfortable stop to prevent sliding of the hand. The length of the handle is 170mm.Totally hand made at PETROGRAD factory of joinery and carpentry tools.
Made in Russia

1200p
Отзывов: 1
Рейтинг: