1. Main
  2. Заточные абразивы и станки
  3. Столярные абразивы

Sharpening stone PETROGRAD, 200*70*20mm, 120 grit

Abrasive water stones. Grit: 120, 150, 360, 500, 800, 1000,1500, 2000 and 4000 grit. Size 200x70x20mm. The abrasive grain is silicon carbide. Bond - ceramics. Hardness I ensures minimal wear of the stone during work. Steel does not overheat when sharpening. Does not require oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Manufactured in Russia.

More info about Sharpening stone PETROGRAD, 200*70*20mm, 120 grit
2120p(32.61)
Отзывов: 1
Рейтинг :

Sharpening stone PETROGRAD, 200*70*20mm, 360 grit

Abrasive water stones. Grit: 150, 360, 500, 800, 1000,1500, 2000 and 4000 grit. Size 200x70x20mm. The abrasive grain is silicon carbide. Bond - ceramics. Hardness I ensures minimal wear of the stone during work. Steel does not overheat when sharpening. Does not require oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Manufactured in Russia.

More info about Sharpening stone PETROGRAD, 200*70*20mm, 360 grit
1700p(26.15)
Отзывов: 1
Рейтинг :

Sharpening stone PETROGRAD, 200*70*20mm, 500 grit

Water stone. 500 grit. Size 200*70*20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Used for sharpening and setting bevels.

High sharpening performance, second only to diamond, is ensured by the use of silicon carbide abrasive grains, which are notable for their sharpness and brittleness. The high hardness of carbide-silicon grinding materials allows you to confidently process not only carbon steels, but also hard alloys, which is impossible on stones made of electro-alumina powders. In addition to performance, it is worth noting the extraordinary tactile sensations when sharpening a tool. Stones quickly give a slurry and produce a very pleasant sound.

Water stones PETROGRAD are distinguished by high performance and geometry in a state of delivery.
In the characteristic of a water stone are specified: the first letter - hardness (I, J - soft, K - average); Japanese grain size according to JIS R6001-1987 is 150 (80 microns), 360 (34 microns), 500 (24 microns), 1000 (12 microns), 2000 (6 microns) and C is silicon carbide.

Comparison of FEPA, JIS and GOST standards:

 

More info about Sharpening stone PETROGRAD, 200*70*20mm, 500 grit
1900p(29.22)
Отзывов: 1
Рейтинг :

Sharpening stone PETROGRAD, 200*70*20mm, 800 grit

Water stone. 800 grit. Size 200*70*20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Used for sharpening and setting bevels.

High sharpening performance, second only to diamond, is ensured by the use of silicon carbide abrasive grains, which are notable for their sharpness and brittleness. The high hardness of carbide-silicon grinding materials allows you to confidently process not only carbon steels, but also hard alloys, which is impossible on stones made of electro-alumina powders. In addition to performance, it is worth noting the extraordinary tactile sensations when sharpening a tool. Stones quickly give a slurry and produce a very pleasant sound.

Water stones PETROGRAD are distinguished by high performance and geometry in a state of delivery.
In the characteristic of a water stone are specified: the first letter - hardness (I, J - soft, K - average); Japanese grain size according to JIS R6001-1987 is 150 (80 microns), 360 (34 microns), 500 (24 microns), 1000 (12 microns), 2000 (6 microns) and C is silicon carbide.

Comparison of FEPA, JIS and GOST standards:

More info about Sharpening stone PETROGRAD, 200*70*20mm, 800 grit
2060p(31.68)
Отзывов: 1
Рейтинг :

Sharpening stone PETROGRAD, 200*70*20mm, 1000 grit

Water stone. 1000 grit. Size 200*70*20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Used for sharpening and setting bevels.

High sharpening performance, second only to diamond, is ensured by the use of silicon carbide abrasive grains, which are notable for their sharpness and brittleness. The high hardness of carbide-silicon grinding materials allows you to confidently process not only carbon steels, but also hard alloys, which is impossible on stones made of electro-alumina powders. In addition to performance, it is worth noting the extraordinary tactile sensations when sharpening a tool. Stones quickly give a slurry and produce a very pleasant sound.

Water stones PETROGRAD are distinguished by high performance and geometry in a state of delivery.
In the characteristic of a water stone are specified: the first letter - hardness (I, J - soft, K - average); Japanese grain size according to JIS R6001-1987 is 150 (80 microns), 360 (34 microns), 500 (24 microns), 1000 (12 microns), 2000 (6 microns) and C is silicon carbide.

Comparison of FEPA, JIS and GOST standards:

More info about Sharpening stone PETROGRAD, 200*70*20mm, 1000 grit
2300p(35.37)
Отзывов: 1
Рейтинг :

Sharpening stone PETROGRAD, 200*70*20mm, 1500 grit

Water stone. 1500 grit. Size 200*70*20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Used for sharpening and setting bevels.

High sharpening performance, second only to diamond, is ensured by the use of silicon carbide abrasive grains, which are notable for their sharpness and brittleness. The high hardness of carbide-silicon grinding materials allows you to confidently process not only carbon steels, but also hard alloys, which is impossible on stones made of electro-alumina powders. In addition to performance, it is worth noting the extraordinary tactile sensations when sharpening a tool. Stones quickly give a slurry and produce a very pleasant sound.

Water stones PETROGRAD are distinguished by high performance and geometry in a state of delivery.
In the characteristic of a water stone are specified: the first letter - hardness (I, J - soft, K - average); Japanese grain size according to JIS R6001-1987 is 150 (80 microns), 360 (34 microns), 500 (24 microns), 1000 (12 microns), 2000 (6 microns) and C is silicon carbide.

Comparison of FEPA, JIS and GOST standards:

More info about Sharpening stone PETROGRAD, 200*70*20mm, 1500 grit
2440p(37.53)
Отзывов: 1
Рейтинг :

Sharpening stone PETROGRAD, 200*70*20mm, 2000 grit

Water stone. 2000 grit. Size 200*70*20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Used for sharpening and setting bevels.

High sharpening performance, second only to diamond, is ensured by the use of silicon carbide abrasive grains, which are notable for their sharpness and brittleness. The high hardness of carbide-silicon grinding materials allows you to confidently process not only carbon steels, but also hard alloys, which is impossible on stones made of electro-alumina powders. In addition to performance, it is worth noting the extraordinary tactile sensations when sharpening a tool. Stones quickly give a slurry and produce a very pleasant sound.

Water stones PETROGRAD are distinguished by high performance and geometry in a state of delivery.
In the characteristic of a water stone are specified: the first letter - hardness (I, J - soft, K - average); Japanese grain size according to JIS R6001-1987 is 150 (80 microns), 360 (34 microns), 500 (24 microns), 1000 (12 microns), 2000 (6 microns) and C is silicon carbide.

Comparison of FEPA, JIS and GOST standards:

More info about Sharpening stone PETROGRAD, 200*70*20mm, 2000 grit
2560p(39.37)
Отзывов: 1
Рейтинг :

Sharpening stone PETROGRAD, 200*70*20mm, 3000 grit

Water stones. Grain size: 3000 and 6000 grit. Size 200*70*20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Made in Japan.

 

More info about Sharpening stone PETROGRAD, 200*70*20mm, 3000 grit
3540p(54.45)
Отзывов: 1
Рейтинг :

Sharpening stone PETROGRAD, 200*70*20mm, 4000 grit

Water stone. 2000 grit. Size 200*70*20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Used for sharpening and setting bevels.

High sharpening performance, second only to diamond, is ensured by the use of silicon carbide abrasive grains, which are notable for their sharpness and brittleness. The high hardness of carbide-silicon grinding materials allows you to confidently process not only carbon steels, but also hard alloys, which is impossible on stones made of electro-alumina powders. In addition to performance, it is worth noting the extraordinary tactile sensations when sharpening a tool. Stones quickly give a slurry and produce a very pleasant sound.

Water stones PETROGRAD are distinguished by high performance and geometry in a state of delivery.
In the characteristic of a water stone are specified: the first letter - hardness (I, J - soft, K - average); Japanese grain size according to JIS R6001-1987 is 150 (80 microns), 360 (34 microns), 500 (24 microns), 1000 (12 microns), 2000 (6 microns) and C is silicon carbide.

Comparison of FEPA, JIS and GOST standards:

 

 

 

More info about Sharpening stone PETROGRAD, 200*70*20mm, 4000 grit
3440p(52.91)
Отзывов: 1
Рейтинг :

Sharpening stone PETROGRAD, 200*70*20mm, 6000 grit

Water stones. Grain size: 3000 and 6000 grit. Size 200*70*20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Made in Japan.

More info about Sharpening stone PETROGRAD, 200*70*20mm, 6000 grit
4770p(73.36)
Отзывов: 1
Рейтинг :
%

Заточной абразив ПЕТРОГРАДЪ, 200*70*20мм, 6000грит, Rozcutec

More info about Заточной абразив ПЕТРОГРАДЪ, 200*70*20мм, 6000грит, Rozcutec
5520p(84.9) 6 910 p
Отзывов: 1
Рейтинг :
new

Petrograd axe sharpening stone 2000 grit

Точилка для топоров, ПЕТРОГРАДЪ это очень удобный и простой инструмент, позволяющий поддерживать остроту режущей кромки вашего любимого топора. Абразивность водного камня 500 или 1000 грит. Рукоять выполнена из массива бука. Производство фабрика Петроградъ (Россия).

More info about Petrograd axe sharpening stone 2000 grit
970p(14.92)
Отзывов: 1
Рейтинг :

Столярные абразивы

Popular goods

Carving knife PETROGRAD, Finnish type, 200mm/60mm

Carving knife PETROGRAD, Finnish type, 200mm/60mm

Carving knives with a sharp tip are designed for detailing and working in hard to reach places. Blade length 45mm or 60mm, rounded butt. A comfortable oval redwood handle is saturated with oil and covered with shellac. The length of the handle - 115mm. Excellent knife for both beginners and professionals. The 2.5 mm thick blade is made of high carbon steel hardened to a 59-61 HRc. All the cutters are sharpened and ready to go. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
 
More info about Carving knife PETROGRAD, Finnish type, 200mm/60mm
2500p
Отзывов: 1
Рейтинг:
new
Carving set PETROGRAD, N2

Carving set PETROGRAD, N2

The set includes:

Carving knife PETROGRAD, Bogorodsky type, 155mm/40mm
Carving knife PETROGRAD, Finnish type, 175mm/60mm
Carving knife PETROGRAD, skew 30 deg, 155mm/40mm
Carving knife PETROGRAD, Swedish type, 175mm/60mm
Spoon knife, PETROGRAD, D 27mm, right-handed
Carving chisel, PETROGRAD, 10mm
Textile 6 pocket Tool Roll, PETROGRAD, 360*260mm, for carving knives

The tools are made of steel 65G (Germany 66Mn4, Ck67, USA 1066) and have handles made of beech and maple covered with tung oil.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

More info about Carving set PETROGRAD, N2
15000p
Отзывов: 1
Рейтинг:
Shallow Hook Knife, PETROGRAD, type 3, right-handed

Shallow Hook Knife, PETROGRAD, type 3, right-handed

Hook knife is used for cutting out a hollow in a wooden spoon or scoop, as well as for other similar work. Shallow hook knife N3 has a water drop profile of blade. That's making it perfectly choose for cut wooden spoons bowl. The right version of knife is designed to work with the right hand towards yourself or left hand to outside.

  • Hook knife blade made from tool steel (9ХС) and hardened up to 58-60HRC.
  • All hook cutters are sharpened and ready to go.
  • The outerside of the hook is ring-shaped and perfectly polished. Thats allow you to cut wood cleanly and smoothly without scoring.
  • The handle of the hook knife is made of maple and coated with oil.

The right version of hook knife is designed to work with the right hand towards yourself, the left version - with the left hand towards yourself.
Made by Petrograd toolworks in Saint-Petersburg Russia.

Hook knife specifications:
Blade width: 12 mm
Blade lenght: 75 mm
Steel: 9ХС
Shape: hook
Handle grip: right-handed
Handle lenght: 160 mm
Total lenght: 235 mm
Weight: 0,1 kg

*coating may change from batch to batch

More info about Shallow Hook Knife, PETROGRAD, type 3, right-handed
3600p
Отзывов: 1
Рейтинг:
Checkering set, type N3, 90°/18lines, 10 tools + gauge, in roll bag

Checkering set, type N3, 90°/18lines, 10 tools + gauge, in roll bag

Full tool set for checkering N3 (90 degrees, 18 lines) includes 10 tools  for making checkers on wood. Gouges by Petrograd toolsworks for making checkers. This is most full set of tools for making checkers a on rifle handles. Gouges with 90 degree cutters in this set are making more sharp checkers that grants great grip and less prone to clogging than flat ones.

Set number 3 includes:

  • gouge B-2 ( two cutting edges, spacer with tooths )
  • gouge S-1 ( one cutting edge )
  • gouge N2-18, 90° ( two cutting edges )
  • gouge N3-18, 90° ( right router, left cutting edges )
  • gouge N4-18, 90° ( left router, right cutting edges )
  • gouge C-1, 90° ( one cutting edge )
  • gouge L- 9, 90° ( right router with wide space, left cutting edge )
  • gouge R- 9, 90° ( left router with wide space, right cutting edge )
  • gouge for corners 90° (or Carving chisel, PETROGRAD, V-type, 90 degrees)
  • gouge for marking rifle handles
  • checkering guage
  • roll bag for carving tools model N1 ( 12 pockets )
Checkering is a type of woodcarving and decorating handles of knives, rifles. This gouges was based on our expirience of use the variety of worldwide know gouges. Model line includes all base gouges from 16 to 32 lines per inch with angles about 60 and 90 dergrees. All gouges blades can be replaced on new ones and can be purchased separately.

Checkering tool set by Petrograd toolworks. Made in Saint-Petersburg Russia.

Number of tools: 10 tools
Type of checkers: 90 degrees
Number of lines: 18 lines on 1 inch
Handle material: Beech*
Handle lenght: 120 mm
Total lenght: 240 mm
Total weight: 0.55 kg

  1. Checkering tool S-1 has 1 pyramidal tooth. Angle of the top is 90 degrees. The cutter has a convenient beech handle and a rod with a sharp bend perpendicular to the cutting axis and the working part installed on it. All the cutters are made of steel, undergone the process of hardening and processing, for long and reliable work.
    It is V-shaped with teeth on both sides. Designed to handle corners and bends, as well as hard-to-reach places.
    Pay attention to the high relief, providing fast and smooth cutting. The tines provide good removal of all hardwoods.
    The cutter has not matter what cutting - deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Every element is smooth and beautiful.
    The width of the working part is 5 mm, the length of the working part is 5 mm, the apex angle is 90 °
  2. Checkering tool N2-18. Both sides with 18 teeth per inch. Used for the application of grooves and their deepening after application. One blade runs along the guideline, while the other marks the next groove. When moving to the next groove, the tool deepens it and again applies the next groove. Cutter 2 It is a combination of tools for expanding and deepening grooves. Beech handle. All the cutters are made of steel, underwent a process of hardening and processing, for long and reliable work.
  3. Checkering tool B-2, is a 2 conical cutter with a working angle of 90 degrees, separated by a wide groove with teeth. A tool for making the roller around the notch. Pay attention to the high relief, providing fast and smooth cutting. The tines provide good removal of all hardwoods.A cutter is just the same as cutting deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Smoothly each groove is obtained. Maximum roller height 1 mm, width 2.5 mm
  4. Checkering tools from series N3, have two sides: the right side is smooth, used as a guide, the left - with 18 teeth per inch. All the cutters are made of steel, underwent a process of hardening and processing, for long and reliable work. The right blade is devoid of teeth, has a sharp and smooth shape, and exactly follows along the guide line. The left blade has teeth and cuts a new groove during the process of notching from right to left. Thus, it is possible to apply a notch, using the previous groove, as a guide. Beech handle.
  5. Checkering tools from series N4 have two sides: the right side with 18 teeth per inch, the left - smooth, is used as a guide. All the cutters are made of steel, underwent a process of hardening and processing, for long and reliable work. The left blade is devoid of teeth, has a sharp and smooth shape, and exactly follows along the guide line. The right blade has teeth and cuts a new groove during the process of notching from left to right. Thus, it is possible to apply a notch, using the previous groove, as a guide. Beech handle
  6. Checkering tool C-1 has 1 pyramidal tooth. Angle top 90 degrees. All the cutters are made of steel, undergone the process of hardening and processing, for long and reliable work. It is V-shaped with teeth on both sides. Checkering tool C-1 is designed for applying the original layout of the picture, as well as for deepening the grooves after their application, with other cutters. The wooden handle is made of beech, well balanced and lies comfortably in your hand. Pay attention to the high relief, providing fast and smooth cutting. The tines provide good removal of all hardwoods. The cutter doesnt look like cutting - deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Equal each element is obtained. The width of the working part is 5 mm, the length of the working part is 11 mm, the apex angle 90 degrees
More info about Checkering set, type N3, 90°/18lines, 10 tools + gauge, in roll bag
10290p
Отзывов: 1
Рейтинг:
Axe Anika, model Tomohawk

Axe Anika, model Tomohawk

Топор Аника, Томагавк, с чехлом. Ультра-легкий топор Томагавк с обухом-молотком. Идеальный инструмент для передвижений налегке и хозяйственной деятельности в лесу. Заточка с микроподводом для работ по сухой и сырой древесине. Вес головы — около 600 грамм. Вес топора — около 800 грамм. Общая длина — 400-450 мм.
More info about Axe Anika, model Tomohawk
9600p
Отзывов: 1
Рейтинг:
Petrograd Swan Neck Gouge, n7, 30mm

Petrograd Swan Neck Gouge, n7, 30mm

Стамеска-ложкорез ПЕТРОГРАДЪ, клюкарза Swan Neck, н7,30мм – это прекрасный инструмент, позволяющий без особых усилий выбирать материал, при создании деревянных чаш, кукс и ложек. Эта стамеска выкована вручную из стали 9ХС и закалена до 61 HRc. Производство фабрика Петроградъ (Россия).

More info about Petrograd Swan Neck Gouge, n7, 30mm
5700p
Отзывов: 1
Рейтинг:
new
Carving knife PETROGRAD, Axe type, 32mm / 60 degree

Carving knife PETROGRAD, Axe type, 32mm / 60 degree

Резец-топорик для резьбы по дереву, ПЕТРОГРАДЪ, 32 мм / 60 градусов является частью новой линейки ножей для резьба по дереву Петроградъ. Этот нож основан на резцах-топориках мастера-резчика Адольфа Юрьева. Производство фабрика Петроградъ (Россия).

More info about Carving knife PETROGRAD, Axe type, 32mm / 60 degree
2200p
Отзывов: 1
Рейтинг:
new
PETROGRAD axe, model Bryansk, handle n9

PETROGRAD axe, model Bryansk, handle n9

Топор походный ПЕТРОГРАДЪ, модель Брянск, топорище н9. Предназначен для выполнения бытовых задач: колка дров, подтес колышков и небольших бревен, а также многих других задач. Выкован вручную из стали 65Г, закален до 58-59 HRc. Производство фабрика Петроградъ (Россия).

 

More info about PETROGRAD axe, model Bryansk, handle n9
10700p
Отзывов: 1
Рейтинг:
new
Cabinetmaking Corner Chisel, PETROGRAD, without handle

Cabinetmaking Corner Chisel, PETROGRAD, without handle

Долото столярное ПЕТРОГРАДЪ, угловое, без рукояти. Специально разработано для того, чтобы легко и быстро вырезать углы (например при установке петель). Ширина режущей кромки составляет 10 мм. Долото выполнено из инструментальной стали. Поставляется с кожаным чехлом. Производство – фабрика Петроградъ (Россия).

More info about Cabinetmaking Corner Chisel, PETROGRAD, without handle
3850p
Отзывов: 1
Рейтинг:
new
Bevel edge chisel, PETROGRAD, model Volga, impact type, 16mm

Bevel edge chisel, PETROGRAD, model Volga, impact type, 16mm

Стамеска ПЕТРОГРАДЪ, серия Волга, ударная, 16 мм. Это усовершенствованная версия классической столярной стамески серии Волга. Представленная стамеска оснащена дополнительным кольцом на рукояти, обеспечивающим возможность ударной работы. Производство – фабрика Петроградъ (Россия).

More info about Bevel edge chisel, PETROGRAD, model Volga, impact type, 16mm
3600p
Отзывов: 1
Рейтинг: