Share / Save Link:
Description
Share / Save Link:
Specs
Reviews
Instructions ()
Publications
Recommended products
Forest axe PETROGRAD, model Bryansk
Large forged felling ax Bryansk. This large ax is perfect for felling and chopping trees. It will also not be superfluous on the farm, because with its help you can chop small logs and trim something. Due to the lenticular sharpening, the cutting edge has increased wear resistance.
The felling ax is produced in Russia at the Petrograd factory, the ax is hand forged from alloyed tool steel with subsequent hardening to a hardness of 55-57HRc.
All this allows him to keep his sharpness for a long time and not rub off his external attractiveness.
Overall length: 670 mm.
Handle length: 610 mm
Cutting edge length: 130 mm.
Steel: 65G
Hardening: 55-58
HRc Sharpening: lenticular
Weight: about 1.5kg
Handle material: solid ash
Each ax comes with a stitched leather sheath with rivets, the sheath is used to protect the blade during transport. The handle is made of ash wood and covered with a special coating with extreme wear resistance to scratches. A felling ax is an indispensable assistant when working in a summer cottage and in the forest. With it, you can fell a tree, chop branches, chop small logs and many other small household chores.
Leather belt PETROGRAD, hand made, type 1, 140cm
Popular goods
Carving knife PETROGRAD, Finnish type, 175mm/45mm
Carving knives with a sharp tip are designed for detailing and working in hard to reach places. Blade length 45mm or 60mm, rounded butt. A comfortable oval redwood handle is saturated with oil and covered with shellac. The length of the handle - 115mm. Excellent knife for both beginners and professionals. The 2.5 mm thick blade is made of high carbon steel hardened to a 59-61 HRc. All the cutters are sharpened and ready to go. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
Carving knife PETROGRAD, Finnish type, 200mm/60mm
Carving knife PETROGRAD, skew type, 30 degrees
Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ. Ножи-косяки с углом скоса 30, 40 градусов двухсторонняя заточка. Длина лезвия - 40 мм, ширина 13 мм, прямой обух. Удобная овальная рукоять из красного дерева пропитана маслом и покрыта шеллаком. Длина рукояти - 140 мм. Нож для широкого спектра работ. Лезвие толщиной 2,5 мм выполнено из стали 65Г с закалкой до твердости 59-61 HRc. Заточен и готов к работе.
Сделано в России
Strop PETROGRAD, two-sided, 200mm*70mm
Double-sided bar with glued leather. The size of the bar is 200x70x25mm. It can be used with polishing pastes. Material - ash, leather - "reversal" 2mm. Skin color may differ from the image on the site. Made in Russia.
Cutting knife PETROGRAD, double bevel 30 deg, 20mm/167mm
Knives jambs with a bevel angle of 30 degrees.
The blade length is shown in the table, the blade thickness is about 2 mm. The blade is made of 65G (Germany 66Mn4, Ck67, USA 1066) steel hardened of 59-61 HRc. Convenient rectangular handle of sapele soaked with oil. Sharpened and ready to go. Knives with a slanting sharpening have a wide range of applications (carving, marking, working with cardboard, marquetry, intarsia, veneering, working with leather, producing musical instruments, modeling and in everyday life).
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
| item code | sharpening, deg | width, mm | length, mm | thickness, mm |
| М00013992 | left-sided | 20 | 180 | 2 |
| М00013991 | right-sided | 20 | 180 | 2 |
| М00013993 | double-sided | 20 | 180 | 2 |
Leather Knife PETROGRAD, type 3, double bevel
The saddle knife is designed for cutting and roughing leather. Can be used for straight cuts and trimming of leather.
Produced in Russia at the PETROGRAD factory
Outdoor axe PETROGRAD, model Roslavl 7, scandy bevel, handle n11
Hand forged outdoor axe Roslavl VII with curved handle. Axe as a woodworking tool has superior cutting abilities, short handle and would be good choiсe for any outdoor activity like campings, spoon making, making bonfire and etc. This axe is ideal for those who want take a small axe for different ways of use when you are going out and about in the countryside. Although it is light, it can be used to fell a small or even midle tree, thanks to its handle and heavy, strong head. The axe is also excellent for delimbing a tree and making wooden stakes.
- Total lenght is 370mm ( 14,57inch )
- Height of axe is 140mm ( 5,51inch )
- Lenght of cutting edge is 120mm ( 4,72inch )
- Axe is hand forged from 65G steel (Germany 66Mn4, Ck67, USA 1066).
- Curved cutting edge was straight sharpened.
- Total weight of axe is 0,7kg ( ± 0,05kg )
- Handle lenght is 320mm ( 12,6inch) and it is made from solid mapple with right grain position.
- The axe comes with leather case for protecting cutting edge.
Axe is well balanced and would be a good choice for a lot types of work. It will be great as outdoor axe, for small carpentry and othe woodwork projects. This is kind of universal axe for everyone.
Axe Roslavl VII produced by Petrograd toolworks in Saint Petersburg Russia.
| Head weight: | 0.63 kg |
|---|---|
| Full weight: | 0.7 kg |
| Type: | outdoor hatchet |
| Steel: | 65Г |
| Hardness: | 55-58HRc |
| Handle material: | Ash* |
| Handle lenght: | 320 mm |
| Edge: | Curved |
| Sharpening angle: | 30 degrees |
| Blade lenght: | 120 mm |
| Total lenght: | 370 mm |
** coating oil may changes too
Petrograd leather fingertip for woodcarvers
Leather fingertip is a thumb guard for wood carvers by Petrograd toolworks. Designed to protect hands from sharp tools. Thumb guard protects your finger from cut injuries when you are moving the cutting tool towards thumb, and prevents the formation of calluses when working away from yourself. Watch pictures for more info.
- made of 2mm natural leather
- easy to use
- save you from injures
Guard has a special ring that prevents it from slipping during operation. The thimble was made of 2mm soft leather, which provides good protection for the toe.
Thumb guard was made by Petrograd toolworks in Saint Petersburg Russia
Sharpening stone PETROGRAD, 200*70*20mm, 3000 grit
Water stones. Grain size: 3000 and 6000 grit. Size 200*70*20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Made in Japan.
Sharpening stone PETROGRAD, 200*70*20mm, 6000 grit
Water stones. Grain size: 3000 and 6000 grit. Size 200*70*20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Made in Japan.