Peskov Beam & Trammel compass, type 2



Rating : (1)
Shipping: worldwide

17000 p (261.46) 20 000 p

Description

Большой столярный циркуль Beam & Trammel compass от Андрея Пескова. Это так называемый лучевой или реечный циркуль для черчения больших радиусов.Включает стопорные винты для фиксации иглы. Корпус и винты выполнен из латуни, иглы выкованы из стали. Произведено Андреем Песковым под маркой Петроградъ (Россия)

  • для черчения больших радиусов

В комплект столярного циркуля входят: 3 иглы, 2 крепежа, 2 стержня. Иглы циркуля устанавливаются на подвижные колодки с фиксатором, подвижные колодки в свою очередь установлены на длинный или короткий латунный штифт с прямоугольным сечением 10х10 мм. Грани штифта притуплены снятой фаской. Использование латуни обусловлено внешним видом и ее стойкостью к изменению формы. Минимальный диаметр окружности 40 мм, максимальный 790 мм.

  • длина малого стержня в комплекте 150 мм
  • длина большого стержня в комплекте 400 мм
  • размеры профиля стержня 10Х10 мм
  • длина иглы 32 мм
  • минимальное расстояние между центрами 20 мм
  • максимальное расстояние между центрами 395 мм

Реечный циркуль используется в случаях, когда длины раскрытия обычного циркуля недостаточно. С помощью этого инструмента вы сможете чертить окружности диаметром до 790 мм, искать центра и делить окружности на доли. Что может быть полезно в домостроении, при работе с паркетом, при изготовлении фигурных филенок дверей и других задачах.

Установка карандаша не предусмотрена, теоретически есть возможность установки грифеля схожего с иглой диаметра.

 


abc checkFind out a mismatch? Highlight text and press Ctrl/Cmd + Enter

Share / Save Link:

Specs

Reviews

Instructions ()

Нет файлов

Publications

Recommended products

%

Panel Gauge PETROGRAD

Этот деревянный рейсмус используется для разметки заготовок с большим расстоянием от края, например дверная панель, филенки или лист фанеры, и т.п. Корпус выполнен из клена, стержень длиной 620 мм из граба. Рабочий диапазон реза 4 - 560мм.
Длина стержня 620мм, ширина колодки - 250мм, высота колодки – 123мм. Ширина ножа — 11 мм. Масса 340 г.

Производство фабрики ПЕТРОГРАДЪ

7300p(261.46)
Отзывов: 1
>Рейтинг:
%

Wooden jack plane PETROGRAD, 50mm/320mm, with two blades

Traditional wooden jack plane supplies with two blades. Jack plane preferly used for flattening sheets, beams and boards. Too speed up the flattening process we supply it with two blades: round one for rough flattening and straight one for clean flattening. We had replace the wooden wedge with brass cap mechanism for more secure fix and for minimizing vibrations of hand plane blade during the work.

Main hand plane body was made of maple with brass cap for reliable fixation of the blade, the sole was made of hornbeam, the handle was made of oak. Coating - tung oil and wax.

  • hand plane dimensions 325*70*160 mm
  • main body made of mapple
  • sole made of hornbeam
  • cap made of brass
  • handle made of oak, cherry or walnut (depends on batch)
  • coating - tung oil and wax

Fixing cap is mounted on a strong steel stud, the knob acts as a lever. This design of the clamping cap allows for quick and accurate adjustment of the blade overhang. Body of hand plane was coated with oil. Blade installation angle - 50 °. The blade made of alloy tool steel and hardened to a hardness of 59-61HRC.

  • blade installation angle - 50 °
  • blade hardness - 59-61HRc
  • blade dimensions: length - 175mm
  • blade width - 50mm
  • blade shape - wedge
  • The minimum thickness of the blade is 2.2 mm, the maximum thickness is 3.5 mm
  • The blade sharpening angle is 25 ° and the micro chamfer on the edge is 30 °

Jack hand planes are produced by Petrograd toolworks in Saint-Petersburg Russia.

Hand plane Specification:
Weight: 1.15 kg
Type: Jack plane
Blade Steel: ШХ15 (alloy tool steel)
Blade hardness: 59-61HRc
Edge blade 1: Straight
Edge blade 2: Round
Blade lenght: 175 mm
Blade width: 50 mm
Sole material: hornbeam
Body material: maple
Handle material: Oak*
Sole lenght: 325 mm
* handle material can various from batch to batch
16000p(261.46)
Отзывов: 1
>Рейтинг:

Textile 16 pocket Tool Roll, PETROGRAD, 370*330mm, for chisels

Tool roll. Size - 370x330mm, 16 pockets. It is intended for storage of tools: cutters, chisels, knives. The maximum tool length is 300mm. Made of thick fabric - Furniture FLOCK, stitched seams.

2210p
Отзывов: 1
Рейтинг:

Petrograd Shovel Gouge 50mm

Стамеска полукруглая плотницкая Тотьма, предназначена для изготовления и зачистки продольных пазов и профилей, например при изготовлении сруба. Так же подойдет для удаления коры и декорирования поверхности на больших площадях. Рекомендована к использованию плотникам. Производство фабрика Петроградъ
14200p
Отзывов: 1
Рейтинг:

Mallet PETROGRAD, round, D65mm*250mm, 300 g

Wooden mallet, round shape. Solid wood mallets made by woodturning. Mallet weight 300 gramm. Mallets made of beech wood and covered with tung oil. Round mallets used for working with mortise chisels and woodcarving chisels. It used when cutting joints and when carving large elements or sculptures (work from under the mallet).

Production of Petrograd toolworks. Made in Saint Petersburg Russia.

Mallet Specification:
diameter: 65 mm
weight: 300 gramm
material: beech wood
coating: thung oil*
*coating may change from batch to batch
980p
Отзывов: 1
Рейтинг:

Heavy Duty Corner Framing Chisel, PETROGRAD, model Yelnya, 540mm/300mm, 25mm*25mm (1`)

Forged corner carpenter chisel PETROGRAD 25*25 mm with a wooden handle are designed for hard work with wood. The blade is forged manually from steel ШХ15 (USA 52100, G52986, J19965; Germany 1.3505, 100Cr6, 102Cr6) and hardened to a hardness of 58-61 HRC. With the help of machining specified exact geometry. Designed for processing and cleaning the corners of deep grooves. The handles are made of ash and crimped with two stainless rings - one to prevent splitting wood near the handle, the second to harden the back of the bar when working with a mallet or hammer. A leather pad between the chisel and the grip allows you to dampen the blows. Available in 25 mm wide. Blade length 300 mm, total length 550 mm. The guarantee of 100% quality is a small hole on the back of the chisel - a trace from the diamond cone of the device for determining the hardness. This test passes every chisel.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

13900p
Отзывов: 1
Рейтинг:

Bent Gouge Rubankov, N7, 30mm

Bent Gouge Rubankov, N7, 30mm (1.8 inches)

Carving chisel "Rubankov" Bent Gouge N7, 30mm ( 1.8 inches ). Perfectly suits for volume carving and deep hollow carving. The width of the cutting edge is 30mm ( 1.8inches ). The total lenght of the gouge is 280mm (11.02inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 135mm (5.31inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.

Gouge is sharpened, honed and fully ready to work out of the box.
This model is for hand cutting and can be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )

5800p
Отзывов: 1
Рейтинг:

Checkering tool complete N3-20, 60°

Checkering tools from series N3, have two sides: the right side is smooth, used as a guide, the left - with teeth. All the cutters are made of steel, underwent a process of hardening and processing, for long and reliable work. The right blade is devoid of teeth, has a sharp and smooth shape, and exactly follows along the guide line. The left blade has teeth and cuts a new groove during the process of notching from right to left. Thus, it is possible to apply a notch, using the previous groove, as a guide. Beech handle. 

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

850p
Отзывов: 1
Рейтинг:
%

Carving set PETROGRAD, N9

Set of 3 wood carving tools. Best choice for starting wood carving spoons. This set is all what you will need to star wood carving your first spoon. All blades a razor sharp and ready to cut out of the box.

The set N9 includes:
  • Carving knife PETROGRAD, Bogorodsky type, 155mm/40mm
  • Carving knife PETROGRAD, skew 40 deg, 165mm/35mm
  • Spoon knife ( hook knife ) model N1, D 27mm, right one
  • Wooden case for 3 wood carving knives
Wood carving knives was produced by Petrograd toolwork in Saint Petersburg Russia
8340p
Отзывов: 1
Рейтинг:
new

Carving set PETROGRAD, N10

Carving set PETROGRAD, N10
The set includes:
Carving chisel PETROGRAD, V-type, 60 degree
Carving gouge PETROGRAD, 3mm
Carving gouge PETROGRAD, 6mm
Carving gouge PETROGRAD, 8mm
Carving chisel PETROGRAD, 8mm
Textile 6 pocket Tool Roll, PETROGRAD, 360*260mm, for carving knives
Carving knife PETROGRAD, model Hatchet N1, skew, 27mm

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

13200p
Отзывов: 1
Рейтинг:
new

Carving set PETROGRAD, N11

Carving set PETROGRAD, N11
The set includes:
Carving chisel PETROGRAD, V-type, 60 degree
Carving gouge PETROGRAD, 3mm
Carving gouge PETROGRAD, 6mm
Carving chisel PETROGRAD, 8mm
Textile 4 pocket Tool Roll, PETROGRAD, 360*200mm
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
10230p
Отзывов: 1
Рейтинг:

Shallow Hook Knife, PETROGRAD, type 3, left-handed

Hook knife is used for cutting out a hollow in a wooden spoon or scoop, as well as for other similar work. Shallow hook knife N3 has a water drop profile of blade. That's making it perfectly choose for cut wooden spoons bowl. The left version of knife is designed to work with the left hand towards yourself or right hand to outside.

  • Hook knife blade made from tool steel (9ХС) and hardened up to 58-60HRC.
  • All hook cutters are sharpened and ready to go.
  • The outerside of the hook is ring-shaped and perfectly polished. Thats allow you to cut wood cleanly and smoothly without scoring.
  • The handle of the hook knife is made of maple and coated with oil*.

The right version of hook knife is designed to work with the right hand towards yourself, the left version - with the left hand towards yourself.
Made by Petrograd toolworks in Saint-Petersburg Russia.

Hook knife specifications:
Blade width: 12 mm
Blade lenght: 75 mm
Steel: 9ХС
Shape: hook
Handle grip: left-handed
Handle lenght: 160 mm
Total lenght: 235 mm
Weight: 0,1 kg
*coating may change from batch to batch
3600p
Отзывов: 1
Рейтинг: