Поделиться / Сохранить себе ссылку:
Киянка полиуретановая ПЕТРОГРАДЪ, модель 1, D90мм, безоткатная
- Основной склад: 19 шт.Петербург: 1 шт.Москва: 2 шт.
Описание
Киянка полиуретановая ПЕТРОГРАДЪ, 800г, безоткатная. Киянка широкого спектра применения для столярных, плотницких работ, а также при Резьбе по дереву.
Головка изготовлена из прочного уретанового материала, который разработан, чтобы быть тихим и в то же время способен передавать максимальный удар по инструменту. Удобная красивая ручка изготовлена из отборных высококачественных лиственных пород.
Киянка весом 800 имеет уретановый боек диаметром 85мм и дополнительно утяжелена дробью, общая длина 270мм
Высококачественная пластиковая головка молотка износостойкая, надежная и защищают рукоятки ваших инструментов.
Цвет пластиковой части: до марта 2020 года эти киянки производились в жёлтом цвете. С марта 2020 года - синими
На деревянной части киянки допустимы небольшие дефекты (пигментные пятна, небольшие трещины) не влияющие на работоспособность инструмента
Произведено в России на фабрике «ПЕТРОГРАДЪ»
Поделиться / Сохранить себе ссылку:
Видеоматериалы
Характеристики
Отзывы
Файлы ()
Статьи
Рекомендуемые товары
Популярные товары
Woodcarving drawknife PETROGRAD , u-shaped, 130mm
Flat U-shaped drawknife is designed for joinery, woodcarving, as well as for carpentry. Ideal for making Windsor chairs. Handles are in the same plane with the blade that allows easy control of the tool, and their direction at an angle to the cutting edge allows for less stress on the wrists.. The 3.5 mm thick blade has a straight cutting edge, made of carbon steel 65G (Germany 66Mn4, Ck67, USA 1066) and hardened to 57-59 HRC. Handles 100mm long made of maple, impregnated with oil and reinforced with a brass ring. Blade length - 135 mm, width 20 mm. Sharpening angle - 30grad. Includes leather case to protect the blade. Totally hand made at PETROGRAD factory of joinery and carpentry tools.
Made in Russia.
Carving knife PETROGRAD, Bogorodsky type, 200mm/60mm
Carving knives for general use, as well as for large material removal. Blade length 40mm or 60mm, rounded butt. A comfortable oval redwood handle is saturated with oil and covered with shellac. The length of the handle - 115mm. Excellent knife for both beginners and professionals. The 2.5 mm thick blade is made of high carbon steel hardened to 59-61 HRc. All the knives are sharpened and ready to go. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
Carving knife PETROGRAD, Finnish type, 200mm/60mm
Carving knife PETROGRAD, Swedish type, 180mm/40mm
Strop PETROGRAD, for carving tools, 150mm*30mm
The bar with glued leather is designed for finishing semi-circular chisels, drawknives, etc. One of the flat sides can also be used for fine-tuning of flat tools. The size of the bar is 150x30 mm. Min radius - 3 mm, max. radius -6 mm. It can be used with polishing pastes. Material - ash, leather - reversal 2mm. Leather color may differ from the image on the site. Made in Russia.
Checkering tool complete BBT 11/16`
Rubber mounted, chatter-free cutters, shave out excess wood without "digging in". Leaves barrel channel smooth and ready for barrel, without gouging, rasping or final sanding.
Checkering tool complete N3-24, 60°
Checkering tools from series N3, have two sides: the right side is smooth, used as a guide, the left - with teeth. All the cutters are made of steel, underwent a process of hardening and processing, for long and reliable work. The right blade is devoid of teeth, has a sharp and smooth shape, and exactly follows along the guide line. The left blade has teeth and cuts a new groove during the process of notching from right to left. Thus, it is possible to apply a notch, using the previous groove, as a guide. Beech handle.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
Leather 16 pocket Tool Roll, PETROGRAD
Leather tool roll PETROGRAD. The bag is made of a brown split is designed for storing and carrying carving and bench chisels with a handle diameter of not more than 35 mm and a total length of not more than 260 mm. The bag is equipped with ties for fixing the bag in a twisted state. Width 320 mm, total length in unfolded state 520 mm. The location of the pockets is two-sided. We recommend placing chisels in a bag with protective caps put on cutting edges.
The manufacturer reserves the right to make changes in the design of the bag that do not lead to deterioration of its qualities.
Made in Russia.
Outdoor axe PETROGRAD, model Roslavl 7, scandy bevel, handle n11
Hand forged outdoor axe Roslavl VII with curved handle. Axe as a woodworking tool has superior cutting abilities, short handle and would be good choiсe for any outdoor activity like campings, spoon making, making bonfire and etc. This axe is ideal for those who want take a small axe for different ways of use when you are going out and about in the countryside. Although it is light, it can be used to fell a small or even midle tree, thanks to its handle and heavy, strong head. The axe is also excellent for delimbing a tree and making wooden stakes.
- Total lenght is 370mm ( 14,57inch )
- Height of axe is 140mm ( 5,51inch )
- Lenght of cutting edge is 120mm ( 4,72inch )
- Axe is hand forged from 65G steel (Germany 66Mn4, Ck67, USA 1066).
- Curved cutting edge was straight sharpened.
- Total weight of axe is 0,7kg ( ± 0,05kg )
- Handle lenght is 320mm ( 12,6inch) and it is made from solid mapple with right grain position.
- The axe comes with leather case for protecting cutting edge.
Axe is well balanced and would be a good choice for a lot types of work. It will be great as outdoor axe, for small carpentry and othe woodwork projects. This is kind of universal axe for everyone.
Axe Roslavl VII produced by Petrograd toolworks in Saint Petersburg Russia.
| Head weight: | 0.63 kg |
|---|---|
| Full weight: | 0.7 kg |
| Type: | outdoor hatchet |
| Steel: | 65Г |
| Hardness: | 55-58HRc |
| Handle material: | Ash* |
| Handle lenght: | 320 mm |
| Edge: | Curved |
| Sharpening angle: | 30 degrees |
| Blade lenght: | 120 mm |
| Total lenght: | 370 mm |
** coating oil may changes too
Leather 14 pocket Tool Roll, RUBANKOV
Our leather tool roll-up (roll organizer, chisel roll) is designed for storage woodworking and carving tools: chisels, gouges, mortises, knives. Tool roll pouch grants good organization of your tools and not takes too much space, so you can take it with you when you need it.
- maximum tool length - 280 mm
- made of split leather with double stitching
- 14 pockets
- fixing by two straps
- tool roll dimensions 325 x 430 mm
Tool roll is made of strong split of leather, so it wouldn't cut in pieces by your extremely sharp tool, but we are recommended to use protective caps on edges yet. Tools must be storage with handles inside pockets, blades must be outside.
Made by Petrograd toolworks in Saint Petersburg Russia
| Weight: | 0.34 kg |
|---|---|
| Type: | for chisels and gouges |
| Material: | natural split leather |
| Max tool lenght: | 280 mm |
| Number of pockets: | 14 |
| Lock: | two straps |
* tools not included and take place on photo only for example