Share / Save Link:

Moxon vises, 380mm, wheel handles



Rating : (1)
Shipping: worldwide

29600 p (455.25)

Description

Moxons vise, wheel handles. This is the most suitable vise for making woodworking joints and definitely best vise for making Dovetails.

The vise must be installed on a workbench or other work surface such as massive table. This position is raising the workpiece to a comfortable height for sawing, marking and clear chisel cutting. The front jaw of vise is a clamping jaw. It is firmly fix the workpiece with two screws. Downside of front jaw protrudes downward for easy position vise flush to edge of surface.

  • easily and quickly attachment to surface by any fast clamp or bench clamp
  • easy vise position, flush to surface edge
  • rise worpice for comfortable work
  • max width of board for clamping - 380 mm (between screws)
  • max thickness of workpice - 120mm (jaw opening)

We make our Moxon vises from solid beech wood, so you can't damage sharp edges of your tools while working with it and if needed you can always make part of it itself.

  • vise is made of solid beech wood
  • front jaw lenght - 500 mm
  • jaw thickness - 45mm
  • width between screws - 380 mm
  • width of base plate - 100 mm
  • lenght of base plate - 545 mm

This model of vise present with metal screws and wheel handles ( wooden screw model here ).

  • trapezoidal thread
  • strong and fast clamp
  • wheels made of cast iron

The Moxon vise by Petrograd toolworks was designed by Sergey Klein and was based on the early works of Anry Ruobo and Joseph Moxon. Vise have some changes from original work for more compliment work with dovetails and other woodworking joints. Moxon vise do not replace the classic workbench, but it is a devise that expands the arsenal of any master.

  • overall dimensions: 580x145x120
  • weight - 6.5 kg
  • made of soliid beech
  • oil coated

Axe Roslavl VII produced by Petrograd toolworks in Saint Petersburg Russia.

Dimensions: 580x145x120 mm
Weight: 6.5 kg
Type: for dovetailing
Jaw material: beech
Handles: wheel
Handles material: cast iron
Screws thread: trapezoidal
Max width of board: 380 mm
Max thickness of workpice: 120 mm
* we reserve the right to make minor design changes to improve the vise performance.

abc checkFind out a mismatch? Highlight text and press Ctrl/Cmd + Enter

Share / Save Link:

Видеоматериалы

youtube video

Specs

Reviews

Instructions ()

Нет файлов

Publications

Recommended products

%

Magazine Master&Workshop 2021 № 1 (11)

This is a periodical magazine about woodworking, craftsmen and workshops, about the news of the carpentry world. The best masters share their knowledge and experience with everyone. Illustrated specialized full-color magazine.

1000p(455.25)
Отзывов: 1
>Рейтинг:

Fan gasket for bench press

Fan gasket for bench press. Size 40x120 mm consists of 7 slats (4,5,5,5,5,5,10 mm). This simple device is designed to help prevent the vise from skewing and jamming by clamping the workpiece to one side of the vise. Just fit as many fan-shaped spacers as you need so that the thickness of the fan-shaped insert is approximately the same as the thickness of your part. When clamping parts with a thickness of more than 40 mm, it is recommended to use junk pieces of wood together with the fan to compensate for the skew. This keeps your workpiece securely in place and prevents the vise mechanism from skewing and jamming. The gaskets are made of various types of wood and have an aesthetic appearance.

Production - factory of joinery and carpentry tools PETROGRAD.

Made in Russia

1500p(455.25)
Отзывов: 1
>Рейтинг:

Hold Down Clamp, PETROGRAD, type 1

Bench hold down Clamp is  a classic and efficient way for quick fixing workpieces to workbench top. Workbench clamp by Petrograd toolworks is manually hand forged by our blacksmiths and present a high quality piece of art to make you job easy and enjoyable.

  • easy to use
  • strong and save clamp
  • extra fast clamping

To use hold down clamp you need to insert it into one of the bench holes for the stops in the workbench top and press down the workpiece. For more pressure can be used with wooden mallet.

  • max height of clamped piace  - 120 mm
  • diameter of the clamping rod is 16-17 mm
  • to use with 19 mm holes ( 3/4 inch)
  • for worbench top thick < 50 mm
  • material - forged steel
  • The size of the clamp is 290 x 200 mm. Material - steel.

Bench top camps are made by Petrograd toolworks in Saint-Petersburg Russia.

Hold down clamp Specifications:
Weight:1.08 kg
Type:hold down
Rod diameter:16-17 mm
Material:forged steel
Total lenght:290 mm
 * material of handles may changes from batch to batch.
3900p(455.25)
Отзывов: 1
>Рейтинг:
%

Protective wax for tools, PETROGRAD, 40ml

Protective wax for instrument maintenance, PETROGRAD, 40ml. Wax is an excellent material for protecting carpentry and cutting tools from corrosion. The oil is also suitable for lubricating secateurs, bone cutters and scissors, chisels, chisels, axes, adzes and other steel tools.
Contains paraffins, stearic acid, gelling agent, stabilizer, preservatives for metals, orthophosphoric acid, which protects instruments from aggressive environments. Perfect for protecting planing knives, chisels and other cutting tools, it is also suitable for protecting firearms from rust. The tool is not included.
The wax is applied to the surface in a thin layer with gloves using a sponge or brush.
Packaging - plastic jar. Volume - 40 ml.
500p(455.25)
Отзывов: 1
>Рейтинг:

Textile 16 pocket Tool Roll, PETROGRAD, 370*330mm, for chisels

Tool roll. Size - 370x330mm, 16 pockets. It is intended for storage of tools: cutters, chisels, knives. The maximum tool length is 300mm. Made of thick fabric - Furniture FLOCK, stitched seams.

2210p
Отзывов: 1
Рейтинг:

Petrograd Shovel Gouge 50mm

Стамеска полукруглая плотницкая Тотьма, предназначена для изготовления и зачистки продольных пазов и профилей, например при изготовлении сруба. Так же подойдет для удаления коры и декорирования поверхности на больших площадях. Рекомендована к использованию плотникам. Производство фабрика Петроградъ
14200p
Отзывов: 1
Рейтинг:

Mallet PETROGRAD, round, D65mm*250mm, 300 g

Wooden mallet, round shape. Solid wood mallets made by woodturning. Mallet weight 300 gramm. Mallets made of beech wood and covered with tung oil. Round mallets used for working with mortise chisels and woodcarving chisels. It used when cutting joints and when carving large elements or sculptures (work from under the mallet).

Production of Petrograd toolworks. Made in Saint Petersburg Russia.

Mallet Specification:
diameter: 65 mm
weight: 300 gramm
material: beech wood
coating: thung oil*
*coating may change from batch to batch
980p
Отзывов: 1
Рейтинг:

Heavy Duty Corner Framing Chisel, PETROGRAD, model Yelnya, 540mm/300mm, 25mm*25mm (1`)

Forged corner carpenter chisel PETROGRAD 25*25 mm with a wooden handle are designed for hard work with wood. The blade is forged manually from steel ШХ15 (USA 52100, G52986, J19965; Germany 1.3505, 100Cr6, 102Cr6) and hardened to a hardness of 58-61 HRC. With the help of machining specified exact geometry. Designed for processing and cleaning the corners of deep grooves. The handles are made of ash and crimped with two stainless rings - one to prevent splitting wood near the handle, the second to harden the back of the bar when working with a mallet or hammer. A leather pad between the chisel and the grip allows you to dampen the blows. Available in 25 mm wide. Blade length 300 mm, total length 550 mm. The guarantee of 100% quality is a small hole on the back of the chisel - a trace from the diamond cone of the device for determining the hardness. This test passes every chisel.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

13900p
Отзывов: 1
Рейтинг:

Bent Gouge Rubankov, N7, 30mm

Bent Gouge Rubankov, N7, 30mm (1.8 inches)

Carving chisel "Rubankov" Bent Gouge N7, 30mm ( 1.8 inches ). Perfectly suits for volume carving and deep hollow carving. The width of the cutting edge is 30mm ( 1.8inches ). The total lenght of the gouge is 280mm (11.02inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 135mm (5.31inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.

Gouge is sharpened, honed and fully ready to work out of the box.
This model is for hand cutting and can be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )

5800p
Отзывов: 1
Рейтинг:

Checkering tool complete N3-20, 60°

Checkering tools from series N3, have two sides: the right side is smooth, used as a guide, the left - with teeth. All the cutters are made of steel, underwent a process of hardening and processing, for long and reliable work. The right blade is devoid of teeth, has a sharp and smooth shape, and exactly follows along the guide line. The left blade has teeth and cuts a new groove during the process of notching from right to left. Thus, it is possible to apply a notch, using the previous groove, as a guide. Beech handle. 

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

850p
Отзывов: 1
Рейтинг:
%

Carving set PETROGRAD, N9

Set of 3 wood carving tools. Best choice for starting wood carving spoons. This set is all what you will need to star wood carving your first spoon. All blades a razor sharp and ready to cut out of the box.

The set N9 includes:
  • Carving knife PETROGRAD, Bogorodsky type, 155mm/40mm
  • Carving knife PETROGRAD, skew 40 deg, 165mm/35mm
  • Spoon knife ( hook knife ) model N1, D 27mm, right one
  • Wooden case for 3 wood carving knives
Wood carving knives was produced by Petrograd toolwork in Saint Petersburg Russia
8340p
Отзывов: 1
Рейтинг:
new

Carving set PETROGRAD, N10

Carving set PETROGRAD, N10
The set includes:
Carving chisel PETROGRAD, V-type, 60 degree
Carving gouge PETROGRAD, 3mm
Carving gouge PETROGRAD, 6mm
Carving gouge PETROGRAD, 8mm
Carving chisel PETROGRAD, 8mm
Textile 6 pocket Tool Roll, PETROGRAD, 360*260mm, for carving knives
Carving knife PETROGRAD, model Hatchet N1, skew, 27mm

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

13200p
Отзывов: 1
Рейтинг:
new

Carving set PETROGRAD, N11

Carving set PETROGRAD, N11
The set includes:
Carving chisel PETROGRAD, V-type, 60 degree
Carving gouge PETROGRAD, 3mm
Carving gouge PETROGRAD, 6mm
Carving chisel PETROGRAD, 8mm
Textile 4 pocket Tool Roll, PETROGRAD, 360*200mm
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
10230p
Отзывов: 1
Рейтинг:

Shallow Hook Knife, PETROGRAD, type 3, left-handed

Hook knife is used for cutting out a hollow in a wooden spoon or scoop, as well as for other similar work. Shallow hook knife N3 has a water drop profile of blade. That's making it perfectly choose for cut wooden spoons bowl. The left version of knife is designed to work with the left hand towards yourself or right hand to outside.

  • Hook knife blade made from tool steel (9ХС) and hardened up to 58-60HRC.
  • All hook cutters are sharpened and ready to go.
  • The outerside of the hook is ring-shaped and perfectly polished. Thats allow you to cut wood cleanly and smoothly without scoring.
  • The handle of the hook knife is made of maple and coated with oil*.

The right version of hook knife is designed to work with the right hand towards yourself, the left version - with the left hand towards yourself.
Made by Petrograd toolworks in Saint-Petersburg Russia.

Hook knife specifications:
Blade width: 12 mm
Blade lenght: 75 mm
Steel: 9ХС
Shape: hook
Handle grip: left-handed
Handle lenght: 160 mm
Total lenght: 235 mm
Weight: 0,1 kg
*coating may change from batch to batch
3600p
Отзывов: 1
Рейтинг: