Share / Save Link:

Sharpening set PETROGRAD N3, for knives, 3 stones



Rating :
(1)
Shipping: worldwide

1290 p (19.84)

Description

Sharpening set PETROGRAD N3.Water stones. Grain size: 150, 360, 500, 1000, 1500 and 2000. Size 15х15х120mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Used for sharpening and setting bevels.

High sharpening performance, second only to diamond, is ensured by the use of silicon carbide abrasive grains, which are notable for their sharpness and brittleness. The high hardness of carbide-silicon grinding materials allows you to confidently process not only carbon steels, but also hard alloys, which is impossible on stones made of electro-alumina powders. In addition to performance, it is worth noting the extraordinary tactile sensations when sharpening a tool. Stones quickly give a slurry and produce a very pleasant sound.

> Water stones PETROGRAD are distinguished by high performance and geometry in a state of delivery.
In the characteristic of a water stone are specified: the first letter - hardness (I, J - soft, K - average); Japanese grain size according to JIS R6001-1987 is 150 (80 microns), 360 (34 microns), 500 (24 microns), 1000 (12 microns), 2000 (6 microns) and C is silicon carbide.

 

  150 360 500 1000 1500 2000
Sharpening set PETROGRAD N3     + +   +
Sharpening set PETROGRAD N4 + + + + + +

 

Comparison of FEPA, JIS and GOST standards:


Share / Save Link:

Videos

youtube video
youtube video
youtube video

Specs

Reviews

Instructions ()

Нет файлов

Publications

Recommended products

Non slip mat for sharpening

Коврик для заточки инструмента, 250мм*100мм. Используется для работы с заточными абразивными камнями. Препятствует скольжению абразивных камней по рабочему столу тем самым обеспечивает комфортную работу. Изготовлен из высококачественного силикона толщиной 0,5мм. Легко отмывается от шлама. Предохраняет рабочий стол от царапин и повреждений.

Сделано в России

400p(19.84)
Отзывов: 1
>Рейтинг:

Magazine Master&Workshop 2020 № 2 (9)

Журнал Мастер и мастерская 2020 2 (9)

500p(19.84)
Отзывов: 1
>Рейтинг:

Leather strops PETROGRAD, 200mm*70mm, 5 pcs

Набор для полирования N1, ПЕТРОГРАДЪ, кожа 200мм*70мм, 5 штук. Набор кожаных накладок предназначен для доводки столярного и плотницкого инструмента, полукруглых резчицких стамесок, скобелей, ножей и другого режущего инструмента.

Производство - Россия

600p(19.84)
Отзывов: 1
>Рейтинг:

Bench chisel PETROGRAD 10 mm

Chisels PETROGRAD. Blade length - from 120mm to 160mm; width - 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 16mm, 20mm, 26mm, 32mm, 40mm, 50mm. The total length is from 250mm to 295mm. The chisels are specially made based on the experience of the old masters of carpentry. The blade is made of high-alloy chrome-manganese tool steel and hardened to 60HRc. The edges of the web are chamfered towards the edges, but at the same time the edges of the web have a constant thickness. This design allows you to work comfortably in hard to reach places and especially with dovetail connections. Comfortable hornbeam handle, handle size - 130x30mm and 135x30mm. The handle at the junction with the blade is reinforced with a brass ring with a leather pad 

1520p
Отзывов: 1
Рейтинг:

Bench chisel PETROGRAD 50 mm

Bench chisel PETROGRAD. The length of the blade 120mm; width - 50mm. Overall length 250mm.These chisels have a classic design with blades that are bevel-edged to a narrow land on each side, providing excellent clearance when trimming into an angled corner such as in dovetail work, as well as reducing sidewall friction when working in a tight recess. Chisels are made focusing on the experience of old masters of woodworking. The blade is made of high-alloyed chrome-manganese steel and hardened to 60HRc. Comfortable hornbeam handle. The handle at the junction with the blade reinforced brass ring with leather gasket. 

3230p
Отзывов: 1
Рейтинг:

Set of bench chisels , in tool roll, 8 pcs (6,8,10,12,16,20,26,32mm)

Set of bench chisels PETROGRAD. The length of the blade - from 120mm to 160mm; width - 6mm, 8mm, 10mm, 12mm, 16mm, 20mm, 26mm, 32mm. Overall length - from 250mm to 295mm.These chisels have a classic design with blades that are bevel-edged to a narrow land on each side, providing excellent clearance when trimming into an angled corner such as in dovetail work, as well as reducing sidewall friction when working in a tight recess. Chisels are made focusing on the experience of old masters of woodworking. The blade is made of high-alloyed chrome-manganese steel and hardened to 60HRc. Comfortable hornbeam handle. The handle at the junction with the blade reinforced brass ring with leather gasket. 

12790p
Отзывов: 1
Рейтинг:

Skew chisel PETROGRAD, left-sided, 12mm

Skew chisel PETROGRAD. The angle of inclination of the cutting edge to the chisel axis is 30 degrees. The length of the blade - 130mm; width - 12mm. Overall length 265mm. The blade is made of high-alloyed chrome-manganese tool steel and hardened to 60HRc. The handle is made of hornbeam wood. Included - plastic tip to protect the cutting edge. The handle at the junction with the blade reinforced brass ring with leather gasket.

1340p
Отзывов: 1
Рейтинг:

Firmer gouge PETROGRAD 12mm

Special gouges with blackened blade, which tapers in hight. Forged blade is made of traditional Cr-Mn steel and is heat treated to 59 Hrc. Improved blade penetration into wood. Combination of the stained hornbeam handle, brass ferrule and improved griding of the blade creates unique design of the tool.

2450p
Отзывов: 1
Рейтинг:

Sharpening stone PETROGRAD, 200*70*20mm, 1000 grit

Water stones. Grain size: 150, 360, 500, 1000, 1500, 2000 and 4000 grit. Size 200*70*20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Made in Russia.

 

 

1980p
Отзывов: 1
Рейтинг:

Carving knife PETROGRAD, Bogorodsky type, 170mm/40mm

Carving knives for general use, as well as for large material removal. Blade length 40mm or 60mm, rounded butt. A comfortable oval redwood handle is saturated with oil and covered with shellac. The length of the handle - 115mm. Excellent knife for both beginners and professionals. The 2.5 mm thick blade is made of high carbon steel hardened to 59-61 HRc. All the knives are sharpened and ready to go. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
 
1200p
Отзывов: 1
Рейтинг:

Carving knife PETROGRAD, Bogorodsky type, 190mm/60mm

Carving knives for general use, as well as for large material removal. Blade length 40mm or 60mm, rounded butt. A comfortable oval redwood handle is saturated with oil and covered with shellac. The length of the handle - 115mm. Excellent knife for both beginners and professionals. The 2.5 mm thick blade is made of high carbon steel hardened to 59-61 HRc. All the knives are sharpened and ready to go. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
 
1400p
Отзывов: 1
Рейтинг:

Sharpening set PETROGRAD N1, for woodworking tools, 3 stones

Water stones. Grain size: 150, 360, 500, 800, 1000, 1500 and 2000. Size 200x70x20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Made in Russia.

To select and order an abrasive stone of desired grain size, click on the name of the product.

5240p
Отзывов: 1
Рейтинг:

Adze PETROGRAD, straight N1, 460mm/75mm

Straight adze.

Forged tempered to hardness of 58-60HRc. The blade are made of spring steel 65 g (Germany 66Mn4, Ck67, USA 1066). The blade width is 74 mm. Total length - 450 mm. Weight - 1.1 kg.

The adze handle is made of maple wood and covered with tung oil and has a curved finish and is fixed on a wooden wedge.

Totally hand made at PETROGRAD factory of joinery and carpentry tools.

Made in Russia

9600p
Отзывов: 1
Рейтинг: