Plane blade, PETROGRAD, 40mm*175mm

Wood carving axe Zvenigorod VII . This axe is made for artistic processing of wood, such as carving sculptures, bowl carving, dish carving and other stuff.

• Blade width 120 mm
• Sharpening angle - 25 degrees
• Hardness - 55-58HRc
• Handle lenght - 350 mm
• Full weight - 07 kg

Carving axe Zvenigorod VII is quite small and easy to control. It's weight is about 650g, makes it maneuverable and allows you to work more accurate and precise.

The shape of the axe head was designed for carving operations where palm is resting extreamly close to axe head or even on the axe head. This design helps to exelent control of the axe even during long carving sessions. Grip above the head is used for trimming, stripping. This axe model was based on samples from museum "Rubankov" and finalized taking into account the wishes of wood carvers.

The axe head is hand forged from steel 65Г (spring steel) and hardened to 55 - 58 HRc at the cutting edge and along the entire beard, the rest part is normalized to HB280. This hardening allows you to hit the poll without the risk of creating a cracks in the metal.
Head has mounted to handle on 3 wedges, one along the head eye and two in cross section.

Cutting edge is razor sharp and ready to work out of the box. Sharpening angle - 30 degrees.

Axe handle is made of maple* and coated with Danish oil**. The hatchet handle has a longitudinal bend. In cross-section the handle has the shape of an egg, which is very convenient for good grip while carving. Handle has a hole for hanging.

Woodcarving axe Zvenigorod VII are product of Petrograd toolworks and supplied in a leather case for protection of the cutting edge and easy storage. Made in Saint-Petersburg Russia.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

Hook knife is used for cutting out a hollow in a wooden spoon or scoop, as well as for other similar work. Shallow hook knife N3 has a water drop profile of blade. That's making it perfectly choose for cut wooden spoons bowl. The left version of knife is designed to work with the left hand towards yourself or right hand to outside.

• Hook knife blade made from tool steel (9ХС) and hardened up to 58-60HRC.
• All hook cutters are sharpened and ready to go.
• The outerside of the hook is ring-shaped and perfectly polished. Thats allow you to cut wood cleanly and smoothly without scoring.
• The handle of the hook knife is made of maple and coated with oil*.

The right version of hook knife is designed to work with the right hand towards yourself, the left version - with the left hand towards yourself.
Made by Petrograd toolworks in Saint-Petersburg Russia.

Hook knife specifications:

Blade width:	12 mm
Blade lenght:	75 mm
Steel:	9ХС
Shape:	hook
Handle grip:	left-handed
Handle lenght:	160 mm
Total lenght:	235 mm
Weight:	0,1 kg

*coating may change from batch to batch

A set of blanks for making wooden spoons. The set includes two linden bars and 6 original patterns.

• Bars measuring 200x40x25mm and 200x30x22mm.
• Linden is a material for a beginner carver that does not require much work.
• Excellent sanding and tinting.
• Wood color is white.
• Great for subsequent painting.

Before starting work, it is recommended to copy the drawings for further use on other workpieces.

Wooden blanks by Petrograd toolworks. Made in Saint-Petersburg Russia.

Straight Gouge Rubankov, N5, 10mm (0.39 inches)

Carving chisel "Rubankov" Straight Gouge N5, 10mm (0.39 inches). This is universal chisel that perfectly suits for carving hard and soft wood. The width of the cutting edge is 10mm ( 0.39 inches ). The total lenght of the gouge is 280mm (11.02inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 135mm (5.31inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.

Gouge is sharpened, honed and fully ready to work out of the box.
This model is for hand cutting and can be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )

Spoon carving gouge, profile n7, width 30 mm. This bent gouge has been specially designed with an eye on the needs of spoon carvers. Its profile, the bend of the blade and overall dimensions and even the appearance are selected based on the ergonomics of carving a wooden spoon. The main purpose of this chisel is to scoop from spoons, ladles, plates and other wooden items. The chisel is also suitable for classical wood carving. Made by Petrograd toolworks (Russia)

• reliable forged chisel
• blade width 30 mm
• blade working length 110 mm
• quality high carbon steel
• profile number 7
• hardened to 59-61 HRc

High-quality steel, forging and hardening to optimal hardness allows this chisel to perfectly maintain its cutting properties for a long time.
The chisel is sharpened and cuts perfectly right out of the box. Sharpening angle is 25 degrees. The chamfer and the inside of the canvas are mirror polished.

• sharpening angle 25 degrees
• sharpened and honed
• mirror polished
• type - bent gouge

The chisel is very comfortable to work with. The wooden oval handle pleasantly lies in the hand and does not crush the hand while working. You will appreciate the chisels by the end of the work on the item.

• handle length 130mm
• ash wood handle
• coated with tinted oil
• total length 275 mm

This chisel is suitable for removing material in classical carving, and will be especially appreciated by carvers who loves making wooden utensils, and especially wooden spoons and plates.

To keep the chisel in working condition, we recommend using polishing pastes and water stones. Made by Petrograd toolworks (Russia)

Нож ремесленный ПЕТРОГРАДЪ, новгородский тип – классический ремесленный нож, клинок которого выполнен по мотивам древних новгородских ножей. Производство фабрика Петроградъ (Россия).