Vologda Knife, type 1



Rating : (1)
Shipping: worldwide

3200 p (49.22)

Description

Нож рабочий ПЕТРОГРАДЪ, серия Вологда, модель N1 – это нож для резьбы по дереву, используемый в том числе при создании деревянных ложек. Производство фабрика Петроградъ (Россия).

Характеристики ножа:

  • Сталь: 9ХС
  • Закалка: 61 HRC
  • Длина лезвия: 80 мм
  • Общая длина: 280 мм
  • Длина рукояти: 200 мм
  • Материал рукояти: ясень
  • В комплекте кожаный чехол
Представленный нож имеет клинок финского типа со сканди заточкой.

Share / Save Link:

Specs

Reviews

Instructions ()

Нет файлов

Publications

Recommended products

Carving axe PETROGRAD, model Zvenigorod 7, handle n5

Wood carving axe Zvenigorod VII . This axe is made for artistic processing of wood, such as carving sculptures, bowl carving, dish carving and other stuff.

  • Blade width 120 mm
  • Sharpening angle - 25 degrees
  • Hardness - 55-58HRc
  • Handle lenght - 350 mm
  • Full weight - 07 kg

Carving axe Zvenigorod VII is quite small and easy to control. It's weight is about 650g, makes it maneuverable and allows you to work more accurate and precise.

The shape of the axe head was designed for carving operations where palm is resting extreamly close to axe head or even on the axe head. This design helps to exelent control of the axe even during long carving sessions. Grip above the head is used for trimming, stripping. This axe model was based on samples from museum "Rubankov" and finalized taking into account the wishes of wood carvers.

The axe head is hand forged from steel 65Г (spring steel) and hardened to 55 - 58 HRc at the cutting edge and along the entire beard, the rest part is normalized to HB280. This hardening allows you to hit the poll without the risk of creating a cracks in the metal.
Head has mounted to handle on 3 wedges, one along the head eye and two in cross section.

Cutting edge is razor sharp and ready to work out of the box. Sharpening angle - 30 degrees.

Axe handle is made of maple* and coated with Danish oil**. The hatchet handle has a longitudinal bend. In cross-section the handle has the shape of an egg, which is very convenient for good grip while carving. Handle has a hole for hanging.

Woodcarving axe Zvenigorod VII are product of Petrograd toolworks and supplied in a leather case for protection of the cutting edge and easy storage. Made in Saint-Petersburg Russia.

10500p(49.22)
Отзывов: 1
>Рейтинг:

PETROGRAD axe, model Semeonov, handle n30

Топор ложкарный ПЕТРОГРАДЪ, модель Семёнов. Это малый кованый топор, предназначенный для грубой обтески будущих ложек. Производство фабрика Петроградъ (Россия).

10200p(49.22)
Отзывов: 1
>Рейтинг:

Carving knife PETROGRAD, model Parrot

The tool has a hooked shape similar to a parrot's beak with a working part of 26 mm. They have a wide range of applications for carving, are one of the main knives in geometric thread, and are also convenient and in demand using the Whittling carving technique. The knife is made of steel 65G (Germany 66Mn4, Ck67, USA 1066) and have maple handles coated with tung oil. Sharpening angle - 20 degrees, blade thickness - 1.7 mm.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia

2400p
Отзывов: 1
Рейтинг:

Mallet PETROGRAD, Brick type , 85mm*85mm, 600 g

Mallets PETROGRAD, "brick", the size of the hammer is 85 * 85 mm or 60 * 60 mm.
High-quality excellent solid wood mallets weighing 600 g (error + -30 g) and 300 g (error + -30 g)
Mallets made of beech and covered with tung oil. Mallets have a rectangular shape and comfortable, chiseled, ergonomic handle. The handle is fixed on a wooden wedge. Mallets are widely used when working with bits and chisels when cutting connections, as well as when carving large items or sculptures (work from the hammer). It can also be used as an assembly mall.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

1300p
Отзывов: 1
Рейтинг:

Screwdriver PETROGRAD, for chipbreaker, 12mm*1.6mm*125mm

Отвёртки ПЕТРОГРАДЪ представлены тремя моделями. Отвертки могут применяться как для настройки ручного инструмента (рубанков, пил), так и в качестве оружейных.

Первая модель отвёртки ПЕТРОГРАДЪ, (для установки рукоятей) прямой шлиц. Общая длина 125 мм, размер наконечника 10 мм*1.4 мм. Отвертка специально разработана для затягивания винтов рукоятей и прижимного винта на рубанках (кроме 1), также подойдет и для других задач. Точно подходит под размер шлица винтов рубанка, что дает необходимую силу без соскальзывания и срыва шлица на мягких латунных винтах. Материал полотна закаленная сталь 9ХС с твердостью 56 -58 HRc, рукоять выполнена из клена и собрана на латунные заклепки.

Вторая модель отвертки ПЕТРОГРАДЪ, (для установки стружколома) прямой шлиц. Общая длина 125 мм, размер наконечника 12 мм*1.6 мм. Отвертка специально разработана для затягивания винта стружколома на рубанках, также подойдет и для других задач. Точно подходит под размер шлица винтов рубанка, что дает необходимую силу без соскальзывания и срыва шлица на мягких латунных винтах. Материал полотна закаленная сталь 9ХС с твердостью 56 -58 HRc, рукоять выполнена из клена и собрана на латунные заклепки.

Третья модель отвертки ПЕТРОГРАДЪ, (для установки лягушки) прямой шлиц. Общая длина 210 мм, размер наконечника 8 мм*1.2 мм. Отвертка специально разработана для затягивания винтов лягушки на рубанках, также подойдет и для других задач. Точно подходит под размер шлица винтов рубанка, что дает необходимую силу без соскальзывания и срыва шлица на мягких латунных винтах. Материал полотна закаленная сталь 9ХС с твердостью 56 -58 HRc, рукоять выполнена из клена и собрана на латунные заклепки.

Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ. petrograd-tools.com
Сделано в России

2730p
Отзывов: 1
Рейтинг:

Brass hammer PETROGRAD, model N1

This small brass hammer is designed for finishing trimming and driving parts requiring careful handling. Can be used to adjust the plane when setting the knife. Hammer head peens are flat. Turned polished strikers, hammer handle is made of cherry and covered with oil-wax. This tool in addition to the direct appointment also delivers aesthetic pleasure. The mass of the hammerhead is 125 g. The total length of the hammer is 320 mm. The size of the brass hammer striker - 70 x 16 mm (round section)

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

Made in Russia.

2900p
Отзывов: 1
Рейтинг:

Outdoor axe PETROGRAD, model Roslavl 7, scandy bevel, handle n11

Hand forged outdoor axe Roslavl VII with curved handle.

  • Total lenght is 370mm ( 14,57inch )
  • Height of axe is 140mm ( 5,51inch )
  • Lenght of cutting edge is 120mm ( 4,72inch )
  • Axe is hand forged from 65G steel (Germany 66Mn4, Ck67, USA 1066).
  • Curved cutting edge was straight sharpened.
  • Total weight of axe is 0,7kg  ( ± 0,05kg )
  • Handle lenght is 320mm ( 12,6inch) and it is made from solid mapple with right grain position.
  • The axe comes with leather case for protecting cutting edge.

Axe is well balanced and would be a good choice for a lot types of work. It will be great as outdoor axe, for small carpentry and othe woodwork projects. This is kind of universal axe for everyone.

Axe Roslavl VII produced by Petrograd toolworks in Saint Petersburg Russia.

11000p
Отзывов: 1
Рейтинг:

Checkering set, type N1, 90°/18lines, 6 tools + gauge, in roll bag

Set N1 (90 degrees, 18 lines) includes 6 tools  for making checkers on wood.

Gouges for making checkers. Checkering is a type of woodcarving and decorating handles of knives, rifles. This gouges was based on our expirience of use the variety of worldwide know gouges. Model line includes all base gouges from 16 to 32 lines per inch with angles about 60 and 90 dergrees. All gouges blades can be replaced on new ones and can be purchased separately.

Set number 1 includes:

gouge B-2 ( two cutting edges, spacer with tooths )
gouge S-1 ( one cutting edge )
gouge N2-18, 90° ( two cutting edges )
gouge N3-18, 90° ( right router, left cutting edges )
gouge N4-18, 90° ( left router, right cutting edges )
gouge C-1, 90° ( one cutting edge )
roll bag for carving tools ( 6 pockets )
Checkering gauge

6100p
Отзывов: 1
Рейтинг:

Straight Gouge Rubankov, N5, 20mm

Carving chisel "Rubankov" Straight Gouge N5, 20mm (0.79 inches). This is universal chisel that perfectly suits for carving hard and soft wood. The width of the cutting edge is 20mm ( 0.79 inches ). The total lenght of the gouge is 280mm (11.02inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 135mm (5.31inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.

Gouge is sharpened, honed and fully ready to work out of the box.
This model is for hand cutting and can be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )

4200p
Отзывов: 1
Рейтинг:

Outdoor axe PETROGRAD, model Roslavl V, curved handle

Small axe Roslavl V (hatchet) with curved handle. Axe has a superior cutting abilities, it's lightweight and short. Would be good choiсe for any outdoor activity like campings, spoon making, making bonfire and etc. This axe is ideal for those who want take a small axe for different ways of use when you are going out and about in the countryside or fishing or hunting.The axe is also excellent for delimbing a tree and making wooden stakes.

  • Total lenght is 270 mm ( 10,63 inch )
  • Height of axe is 130 mm ( 5,12 inch )
  • Lenght of cutting edge is 90 mm ( 3,54 inch )
  • Axe is hand forged from 65G steel (Germany 66Mn4, Ck67, USA 1066).
  • Curved cutting edge was straight sharpened.
  • Total weight of axe is 0,5 kg  ( ± 0,05kg )
  • Handle lenght is 270 mm ( 10,63 inch) and it is made from solid mapple with right grain position.
  • The axe comes with leather case for protecting cutting edge.
11000p
Отзывов: 1
Рейтинг:

Straight Gouge Rubankov, N7, 12mm

Straight Gouge Rubankov, N7, 12mm (0.47 inches)

Carving chisel "Rubankov" Straight Gouge N7, 12mm (0.47 inches). This is universal chisel that perfectly suits for carving hard and soft wood. The width of the cutting edge is 12mm ( 0.47 inches ). The total lenght of the gouge is 280mm (11.02inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 135mm (5.31inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.

Gouge is sharpened, honed and fully ready to work out of the box.
This model is for hand cutting and can be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )

4400p
Отзывов: 1
Рейтинг:
new

Carving set PETROGRAD n18, 6 tools, chisel handles

Набор мини стамесок для резьбы по дереву, ПЕТРОГРАДЪ, N18, 6 предметов. Авторский набор резцов для миниатюрной резьбы по дереву. Эти прекрасные инструменты подойдут для моделистов, любителей миниатюрной резьбы и для максимальной деталировки резьбы. Набор включает четыре полукруглые стамески, одну плоскую стамеску и уголок. Производство Россия.

9500p
Отзывов: 1
Рейтинг: