Нож раскроечный ПЕТРОГРАДЪ, модель 2, двусторонняя заточка, в чехле

Share / Save Link:

Leather Knife PETROGRAD, type 2, double bevel



3800 p (52.74)
Rating :
Avg. value 0 (by rates of 0 users)

Description

Knives saddlery PETROGRAD.
The saddlery knife is designed for cutting and grinding leather. It can be used for straight cutting and skin cutting. The knife is equipped with a leather case.


code model length full mm working part length mm thickness mm sharpening angle заточка
М00016989 2 220 135 bottom
100 top
2 15±2° двусторонняя

l

Share / Save Link:

Specs

Reviews

Instructions ()

Нет файлов

Publications

Spoon knife (shallow hook knife).
Used to made a wooden spoons, as well as for other similar works.
The blade width is 8mm, the inner radius of the ring is 15mm. The outer side of the ring has a convex lens-like shape and is polished, which, together with the small width of the blade, allows you to cleanly and smoothly cut wood without scoring and steps.
The total length of the knife is 175 mm; the length of the handle is 130 mm.
Made of  9ХС (150Cr14, 90CrSi, 90CrSi5) steel, hardened to 58-60HRC.The convenient ergonomic oval handle of the knife is made of maple and impregnated with oil.
All knives are sharpened, finished and fully ready for work.
The right-handed version is designed to work with the right hand towards itself, the left-handed version - with the left hand towards itself.
Totally hand made at PETROGRAD factory of joinery and carpentry tools.
Made in Russia

2 100p

Water stones. Grain size: 150, 360, 500, 1000, 1500, 2000 and 4000 grit. Size 200*70*20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Made in Russia.

 

 

1 670p

A semicircular drawknife with arms curved upwards will be convenient for various operations in the carpentry: precise fit of the logs to size, quick material removal, as well as a selection of recesses. The blade is forged manually from tool steel 65G (Germany 66Mn4, Ck67, USA 1066) and hardened to 55-58 HRC. Blade bending radius - 200mm, sharpening - straight chamfer down. Handles 140mm long are made of beech and saturated with oil. The length of the blade - 170mm, width 36 mm. Blade thickness - 6mm, sharpening angle - 30grad. Comes in a leather case with a clasp on the buttons.
The design of the drawknives, as well as their sharpening, is recommended by the Russian Carpenters Union for debarking and carpentry work on fitting logs. Other kinds of carpentry work may require regrinding. Blade was fully hardened through, that allows you to repeatedly honing the blade or his fully re-grind it. Totally hand made at PETROGRAD factory of joinery and carpentry tools.
Made in Russia.
 
3 600p

Honing guide PETROGRAD is designed to hold the tool at a given angle when manually grinding on abrasive stones. Min clamping length - 60mm, max. width - 82mm, max. thickness - 7mm. Equipped with self-centering clamp for precise blade positioning. It is used for sharpening chisels, plane blades, etc. The limited applicability for Japanese compound blades. It has a roller that does not damage the stone and makes it easy to grind. Made in Japan

2 080p

Water stones. Grain size: 150, 360, 500, 1000, 1500 and 2000. Size 15х15х120mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Made in Russia.

To select and order an abrasive stone of desired grain size, click on the name of the product.

 

1 290p

Pencils PETROGRAD. Slate pencil hardness - 2B, B, HB, H. Convenient pencil of a triangular shape, pencil length - 170 mm. 4 pcs/pack.

Made in Russia.

100p

Checkering tool S-1 has 1 pyramidal tooth. Angle of the top is 60 degrees. The cutter has a convenient beech handle and a rod with a sharp bend perpendicular to the cutting axis and the working part installed on it. All the cutters are made of steel, undergone the process of hardening and processing, for long and reliable work.

It is V-shaped with teeth on both sides. Designed to handle corners and bends, as well as hard-to-reach places.

Pay attention to the high relief, providing fast and smooth cutting. The tines provide good removal of all hardwoods.

The cutter has not matter what cutting - deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Every element is smooth and beautiful.

The width of the working part is 5 mm, the length of the working part is 5 mm, the apex angle is 60 °

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

950p

Checkering tools from T-series has three cutting parts. All the cutters are made of steel, underwent a process of hardening and processing, for long and reliable work. The beech handle is well balanced and easy to use.

At the same time cut all three blades with equally spaced teeth, so you can quickly apply the pattern immediately to a large area. This speeds up the process of drawing the picture, eliminates the additional effort. The lines are parallel with a single pass.

The cutter has not matter what cutting - deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Smooth turns every groove.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

950p

Checkering tools from T-series has three cutting parts. All the cutters are made of steel, underwent a process of hardening and processing, for long and reliable work. The beech handle is well balanced and easy to use.

At the same time cut all three blades with equally spaced teeth, so you can quickly apply the pattern immediately to a large area. This speeds up the process of drawing the picture, eliminates the additional effort. The lines are parallel with a single pass.

The cutter has not matter what cutting - deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Smooth turns every groove.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

950p

New magazine about woodworking 'Master and Workshop'
This is a regular magazine, telling about news from the woodworking world, about craftsmen and workshops.
Read in the first issue of the magazine:
The results of the bucksaw  competition at the FSD 2018
Meeting blogger Mikhail Kuchuk (Heartwood) with subscribers at the school Rubankov.net
Master class "box with a secret"
Interview with Master Alexei Yuryevich Deykin
The story of the innovative jigsaws "Knew Concept"
Hegner Jigsaws - German quality Russian size
Historical excursion on the famous Hobbies jigsaws

Illustrated specialized magazine "Master and Workshop"
Circulation 3000 copies.
Periodicity 6 times a year.

100p