Straight Gouge Rubankov, N2, 12mm



Rating : (1)
Shipping: worldwide

4200 p (64.6)

Description

Carving chisel "Rubankov" Straight Gouge N2, 12mm (0.47inches). This is universal chisel that perfectly suits for carving hard and soft wood. The width of the cutting edge is 12mm (0.47 inches). The total lenght of the gouge is 280mm (11.02inches), blade lenght is 145mm (5.71inches), the lenght of the handle is 135mm (5.31inches). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood (may change) and coated with oil.

Gouge is sharpened, honed and fully ready to work out of the box.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )


Share / Save Link:

Specs

Reviews

Instructions ()

Нет файлов

Publications

Recommended products

%

Magazine Master&Workshop 2020 № 2 (9)

Журнал Мастер и мастерская 2020 2 (9)

500p(64.6)
Отзывов: 1
>Рейтинг:

Woodcarving drawknife PETROGRAD, m-shaped, 130mm

Flat M-shaped drawknife is designed for woodworking, wood carving, as well as for carpentry. Ideal for making Windsor chairs. Handles in the same plane as the blade allow easy control of the instrument, and their direction at an angle to the cutting edge allows for less stress on the wrists. The 3.5mm thick blade has a curved cutting edge, made of carbon steel 65G (Germany 66Mn4, Ck67, USA 1066) and hardened to 57-59 HRC. This form of the cutting edge allows you to smoothly enter the material and control the cutting force. Handles 100mm long made of maple, impregnated with oil and reinforced with a brass ring. Blade length - 135 mm, width 20 mm. Sharpening angle - 30grad. Includes leather case to protect the blade. Totally hand made at PETROGRAD factory of joinery and carpentry tools.

Made in Russia.

4500p(64.6)
Отзывов: 1
>Рейтинг:

Dead blow wooden mallet, round, 450 g

Dead blow wooden mallet, round shape. Mallets made by woodturning from solid wood with filling of metal balls (lead shot). Filling act as a weighting agent, and also reduce recoil upon impact. Mallet weight 450 gramm. Mallets made of beech wood and covered with tung oil. Round mallets used for working with mortise chisels and woodcarving chisels. It used when cutting joints and when carving large elements or sculptures (work from under the mallet).

Production of Petrograd toolworks. Made in Saint Petersburg Russia.

*blow without bounce

1070p(64.6)
Отзывов: 1
>Рейтинг:
%

Polishing Paste 1200 grit 180 g

Waxy polishing pastes in the form of a rectangular bar. Dimensions - 60x60x15mm. Granularity - coarse, medium and fine. Brown 1200grit Weight - 180g. Used for grinding and polishing on wheels, belts, etc. Perfect for hand-held leather bars Petrograd.

Ingredients: a mixture of grinding powders, binders and auxiliary elements kerosene, stearin, sodium bicarbonate, silica gel.

Made in Russia.

720p(64.6)
Отзывов: 1
>Рейтинг:
new

Carving set PETROGRAD, N2

The set includes:

Carving knife PETROGRAD, Bogorodsky type, 155mm/40mm
Carving knife PETROGRAD, Finnish type, 175mm/60mm
Carving knife PETROGRAD, skew 30 deg, 155mm/40mm
Carving knife PETROGRAD, Swedish type, 175mm/60mm
Spoon knife, PETROGRAD, D 27mm, right-handed
Carving chisel, PETROGRAD, 10mm
Textile 6 pocket Tool Roll, PETROGRAD, 360*260mm, for carving knives

 

 

 

 

15000p
Отзывов: 1
Рейтинг:
new

Froe PETROGRAD, model Uglich 300мм

Froe is a special cleaving axe (cleaver) for green woodworking, bodging and spoon making. Long blade and perpendicularly handle make it easy to split wood along the grain. Thick blade back would be good to use with mallet or even log*. Froe axe also good for split logs for fireplace, stove or even for making wood shingles and wooden blanks for spoons.

Edge is lenticular sharpened. Froe "Uglich" by petrograd toolworks is perfect choice for making blanks for spoon making. Froe axe is hand forged and totally made in Saint-Petersburg Russia

8700p
Отзывов: 1
Рейтинг:

Screwdriver PETROGRAD, 8mm*1.2mm*210mm, for plane frog

Frog Adjustment Screwdriver are important tool for hand planes with adjusteble frog. Adjustment screws are deep in constraction of hand plane and cant be reached by short screwdrivers. Screwdriver by Petrograd toolworks are designed and precisely made to comfortably work with adjustment screws of hand plane frog.

  • Scredriver blade made of 9XC tool steel (DIN - 150Cr14)
  • Screwdriver tip hardened to 56-58 HRc
  • Handle is made of sandwich containing two maple parts assembled on metal part with brass rivets.
  • Total screwdriver length 210mm (~8.3")
  • tip width 8mm (~0.31")
  • tip thickness 1.2mm (~0.05")

Frog Adjustment Screwdriver are hand made by Petrograd toolworks and idealy fit with a lot of chipbreaker screws of other famous manufactures. Made in Saint-Petersburg Russia.

2730p
Отзывов: 1
Рейтинг:

Screwdriver PETROGRAD, for plane handles, 10mm*1.4mm*125mm

PETROGRAD screwdrivers are represented by three models. Screwdrivers can be used to adjust the hand tools (planers, saws), and as a gun care screwdriver. The material of the blade is 9XC (DIN - 150Cr14) steel hardened to 56-58 HRc, the handle is made of maple and assembled on brass rivets.

The first model of PETROGRAD screwdriver has a straight tip for installing handles. The total length is 125 mm, the tip size is 10 mm * 1.4 mm. The screwdriver is specifically designed for tightening the screws of the handles and the clamping screw on the planes (except No1), also suitable for other tasks. Exactly fits the size of the slot of the plane screws, which gives the necessary strength without sliding and stalling the slot on the soft brass screws. 

The second model of a PETROGRAD screwdriver has a straight tip for mounting a chip breaker. Total length 125 mm, tip size 12 mm * 1.6 mm. The screwdriver is specially designed for tightening the chipbreaker screw on planes, also suitable for other tasks. Exactly fits the size of the slot of the plane screws, which gives the necessary strength without sliding and stalling the slot on the soft brass screws. 

The third model of a PETROGRAD screwdriver has a straight tip for installing a frog. Total length 210 mm, tip size 8 mm * 1.2 mm. The screwdriver is specially designed for tightening the frog's screws on planes, and is also suitable for other tasks. Exactly fits the size of the slot of the planer screws, which gives the necessary strength without sliding and stalling the slot on the soft brass screws. 

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

2730p
Отзывов: 1
Рейтинг:
new

Carving set PETROGRAD, N11

Carving set PETROGRAD, N11
The set includes:
Carving chisel PETROGRAD, V-type, 60 degree
Carving gouge PETROGRAD, 3mm
Carving gouge PETROGRAD, 6mm
Carving chisel PETROGRAD, 8mm
Textile 4 pocket Tool Roll, PETROGRAD, 360*200mm
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

 

10500p
Отзывов: 1
Рейтинг:

Shallow Hook Knife, PETROGRAD, type 3, right-handed

Hook knife is used for cutting out a hollow in a wooden spoon or scoop, as well as for other similar work. Shallow hook knife N3 has a water drop profile of blade. That's making it perfectly choose for cut wooden spoons bowl. The right version of knife is designed to work with the right hand towards yourself or left hand to outside.

  • Knife blade width - 12mm.
  • Spoon cutter length - 235 mm
  • Handle length - 160 mm
  • Hook knife blade made from tool steel (9ХС) and hardened up to 58-60HRC.
  • All hook cutters are sharpened and ready to go.
  • The outerside of the hook is ring-shaped and perfectly polished. Thats allow you to cut wood cleanly and smoothly without scoring.
  • The handle of the hook knife is made of maple and coated with oil.

The right version of hook knife is designed to work with the right hand towards yourself, the left version - with the left hand towards yourself.
Made by Petrograd toolworks in Saint-Petersburg Russia.

3600p
Отзывов: 1
Рейтинг:

Shallow Hook Knife, PETROGRAD, type 3, left-handed

Hook knife is used for cutting out a hollow in a wooden spoon or scoop, as well as for other similar work. Shallow hook knife N3 has a water drop profile of blade. That's making it perfectly choose for cut wooden spoons bowl. The left version of knife is designed to work with the left hand towards yourself or right hand to outside.

  • Knife blade width - 12mm.
  • Hook cutter length - 235 mm
  • Handle length - 160 mm
  • Hook knife blade made from tool steel and hardened up to 58-60HRC.
  • All hook cutters are sharpened and ready to go.
  • The outerside of the hook is ring-shaped and perfectly polished. Thats allow you to cut wood cleanly and smoothly without scoring.
  • The handle of the hook knife is made of maple and coated with oil.

The right version of hook knife is designed to work with the right hand towards yourself, the left version - with the left hand towards yourself.
Made by Petrograd toolworks in Saint-Petersburg Russia.

3600p
Отзывов: 1
Рейтинг:

Leather fingertip for woodcarvers

Leather fingertip is a thumb guard for wood carvers by Petrograd toolworks. Designed to protect hands from sharp tools. Thumb guard protects your finger from cut injuries when you are moving the cutting tool towards thumb, and prevents the formation of calluses when working away from yourself. Watch pictures for more info.

  • made of 2mm leather
  • easy to use
  • save you from injures

Guard has a special ring that prevents it from slipping during operation. The thimble was made of 2mm soft leather, which provides good protection for the toe.

Thumb guard was made by Petrograd toolworks in Saint Petersburg Russia

600p
Отзывов: 1
Рейтинг:
new

Cutting knife PETROGRAD, Swedish type

Knife craft PETROGRAD, Swedish type, bilateral sharpening. Well cope with many tasks, from domestic to hunting. Made from low alloy tool steel. A knife with a traditional geometric shape of the blade has a double-sided sharpening. It does an excellent job with almost all tasks, a particularly popular knife among tourists, as it will easily cut meat or prepare wood for a fire. It can be easily sharpened on the go.

Blade length - 85mm.
Thickness 2mm.
The total length of the knife is 190mm.
Hardened to a hardness of 59-61 HRc.

Production - joinery and carpentry tools factory
Made in Russia
3300p
Отзывов: 1
Рейтинг:

Grafting knife PETROGRAD, type 1, double bevel

Нож садовый ПЕТРОГРАДЪ, прививочный, в чехле. Прививочный (копулировочный) нож для прививки растений с прямым лезвием. Это нож с односторонней заточкой обеспечивающей ровный срез одним движением. Применятся для прививки черенком.

3500p
Отзывов: 1
Рейтинг: