Straight Gouge Rubankov, N2, 14mm, fishtail



Rating : (1)
Shipping: worldwide

4200 p (64.6)

Description

A professional level cutting tool designed for processing hardwoods and hardwoods. The basis of any set of carving tools is straight chisels. Straight chisels "fish tail" (FT) are suitable for solving problems from creating curly shapes to the selection of lamps, allow you to work in hard-to-reach places where a regular straight chisel cannot handle. They can be used beveled up or down to create concave or convex surfaces.
RUBANKOV chisels are forged from low-alloy high-carbon steel. Hardened to a hardness of 59-61 HRc.
The faceted handle is made of precious wood and covered with oil. The impact side is rounded so as not to crush calluses on the palms. The brass ring has an exquisite look and the effect of the handle from cracking when working with a mallet. The internal profile of the chisel is polished, the detected edge is sharpened and ready for work.
These models are percussion, they can be paired with a mallet.
The declared geometric dimensions vary in handling, as the tool is made and hoarded by hand.
The length of the metal sheet is 145 mm. Overall length with handle 280mm.
Web width - 14mm.

Made at the PETROGRAD joinery and carpentry tools factory.
Production Russia.

Share / Save Link:

Specs

Reviews

Instructions ()

Нет файлов

Publications

Marking knife PETROGRAD, model N3, flexible, arrow form

Dovetail Marking knife N3 has flexible blade with arrow form. This knife is a carpentry tool for precision marking, it has one-sided sharpening. Blade of marking tool is made of high carbon steel and hardened. Best for marking dovetail joints. Arrow form give easy two side marking: forward and backwark.

Knife blade was sharpened and ready to work out of the box.

  • high carbon steel ( like 60SG2A steel (Germany 66Mn4, Ck67, USA 1066))
  • hardened to 59-61 HRc
  • blade length - 40 mm
  • blade width - 9 mm
  • blade thickness - 0.73 mm
  • sharpening angle - 30 degrees
  • skew angle - 60 degrees
1300p
Отзывов: 1
Рейтинг:

Checkering tool complete N3-18, 60°

Checkering tools from series N3, have two sides: the right side is smooth, used as a guide, the left - with teeth. All the cutters are made of steel, underwent a process of hardening and processing, for long and reliable work. The right blade is devoid of teeth, has a sharp and smooth shape, and exactly follows along the guide line. The left blade has teeth and cuts a new groove during the process of notching from right to left. Thus, it is possible to apply a notch, using the previous groove, as a guide. Beech handle. 

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

850p
Отзывов: 1
Рейтинг:
%

Dressing stone PETROGRAD, 120*15*15mm, 4000 grit

Abrasive water stones. Granularity: 150, 360, 500, 1000, 1500 and 2000, 4000. Size 15x15x120mm. The abrasive grain is silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during work. Steel does not overheat when sharpening. Does not require oil. Soak in water for 2-10 minutes before use. Used for sharpening and beveling.

High productivity of sharpening, second only to diamond, is provided by the use of abrasive grains of silicon carbide, which are distinguished by sharpness and brittleness. The high hardness of silicon carbide abrasives allows you to confidently process not only carbon steels, but also hard alloys, which is impossible on stones made of alumina powders. In addition to productivity, it is worth noting the extraordinary tactile sensations when sharpening the tool. The stones quickly slurry and produce a very pleasant sound.
PETROGRAD water stones are characterized by high performance and geometry as delivered.
In the characteristics of the water stone are indicated: the first letter - hardness (I, J - soft, K - medium); grain size according to the Japanese standard JIS R6001-1987 - 150 (80 microns), 360 (34 microns), 500 (24 microns), 1000 (12 microns), 2000 (6 microns) and the material is silicon carbide (C- green, B- the black). Comparison of FEPA, JIS and GOST standards:

500p 740 p
Отзывов: 1
Рейтинг:

Sharpening stone PETROGRAD, 153*15*15mm, 2000 grit

Sharpening stone PETROGRAD. Granularity: 150, 360, 500, 800, 1000, 1500 and 2000. Size 15x15x153mm. The abrasive grain is silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during work. When sharpening, the steel does not overheat. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Manufactured in Russia.

800p
Отзывов: 1
Рейтинг:

Sharpening stone PETROGRAD, 153*15*15mm, 1000 grit

Sharpening stone PETROGRAD. Granularity: 150, 360, 500, 800, 1000, 1500 and 2000. Size 15x15x153mm. The abrasive grain is silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during work. When sharpening, the steel does not overheat. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Manufactured in Russia.

700p
Отзывов: 2
Рейтинг:

Sharpening stone PETROGRAD, 153*15*15mm, 500 grit

Sharpening stone PETROGRAD. Granularity: 150, 360, 500, 800, 1000, 1500 and 2000. Size 15x15x153mm. The abrasive grain is silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during work. When sharpening, the steel does not overheat. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Manufactured in Russia.

600p
Отзывов: 1
Рейтинг:

Sharpening stone PETROGRAD, 153*15*15mm, 360 grit

Sharpening stone PETROGRAD. Granularity: 150, 360, 500, 800, 1000, 1500 and 2000. Size 15x15x153mm. The abrasive grain is silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during work. When sharpening, the steel does not overheat. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Manufactured in Russia.

500p
Отзывов: 1
Рейтинг:

Axe Anika, model Finn-500

Топор Аника, Фин 500, с чехлом. Это топоры для активных видов отдыха, охоты, рыбалки, различных плотницких работ. Топор, созданный по образцам знаменитых финских топоров. Сталь — ШХ15, полный цикл термообработки с зонной закалкой лезвия около 58HRC. Топор имеет ударный обух . Проушина-стакан глубиной — 95 мм. Лезвие зашлифовано.
Рукоять выполнена из ясеня, и покрыта тунговым маслом.

15800p
Отзывов: 1
Рейтинг:
new

Книга "Резные наличники. Центральная Россия"

Книга "Резные наличники. Центральная Россия". Книга о наличниках, в которую входит более двух тысяч фотографий и истории, записанные в ходе экспедиций нескольких лет.

"Поскольку три четверти содержимого книги — фотографии, то и размер её настолько большой, насколько только можно было: 275х350мм. Это больше, чем энциклопедия. Это восхитительно много и даже мелкие детали резьбы наличников будут видны. Собственно это настолько много, что я переживаю, что вы скажете, что книга слишком велика и не встаёт на полку. Но... мелкие фотографии есть и в сети, а в книге на каждом развороте — наслаждение красотой и масштабом.

В книге две части.

Первая — небольшая. История появления и развития наличников и домовой резьбы от XI века до наших дней. Что было до их появления, как они распространялись и изменялись, как на них повлияли каменная архитектура, восстание Декабристов, промышленная революция, Великая Отечественная Война и многое другое.

Вторая — занимает основной объем книги и, в свою очередь, тоже состоит из двух частей: каталога видов наличников и разговоров с жителями домов, произошедших на протяжении последних двенадцати лет. Все шестнадцать областей Центрального Федерального Округа представлены более чем полутора сотнями видов наличников, рассказов, каждый из которых не менее важен, чем резные окошки, — столько же. Поэтому на каждом развороте слева — пара видов наличников, а справа — рассказ.  
6500p
Отзывов: 1
Рейтинг:
new

Carving knife PETROGRAD, Axe type, 65mm / 75 degree

Резец-топорик для резьбы по дереву, ПЕТРОГРАДЪ, 65 мм / 75 градусов является частью новой линейки ножей для резьба по дереву Петроградъ. Этот нож основан на резцах-топориках мастера-резчика Адольфа Юрьева. Производство фабрика Петроградъ (Россия).

2500p
Отзывов: 1
Рейтинг: