Straight Gouge Rubankov, N7, 15mm



2700 p (37.48) out of stock
Rating :
Avg. value 0 (by rates of 0 users)

Description

Straight Gouge Rubankov, N7, 15mm (0.59 inches)

Carving chisel "Rubankov" Straight Gouge N7, 15mm (0.59 inches). This is universal chisel that perfectly suits for carving hard and soft wood. The width of the cutting edge is 7mm ( 0.59 inches ). The total lenght of the gouge is 280mm (11.02inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 135mm (5.31inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.

Gouge is sharpened, honed and fully ready to work out of the box.
This model is for hand cutting and can be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )


Share / Save Link:

Видеоматериалы

Specs

Reviews

Instructions ()

Нет файлов

Publications

Recommended products

The bar with glued leather is designed for finishing semi-circular chisels, drawknives, etc. One of the flat sides can also be used for fine-tuning of flat tools. The size of the bar is 150x30 mm. Min radius - 3 mm, max. radius -6 mm. It can be used with polishing pastes. Material - ash, leather - reversal 2mm. Leather color may differ from the image on the site. Made in Russia.

900p(37.48) In stock

Журнал Мастер и мастерская 2020 2 (9)

300p(37.48) In stock

Mallets PETROGRAD, "brick", the size of the hammer is 85 * 85 mm or 60 * 60 mm.
High-quality excellent solid wood mallets weighing 600 g (error + -30 g) and 300 g (error + -30 g)
Mallets made of beech and covered with tung oil. Mallets have a rectangular shape and comfortable, chiseled, ergonomic handle. The handle is fixed on a wooden wedge. Mallets are widely used when working with bits and chisels when cutting connections, as well as when carving large items or sculptures (work from the hammer). It can also be used as an assembly mall.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

690p(37.48) In stock

Flat U-shaped drawknife is designed for joinery, woodcarving, as well as for carpentry. Ideal for making Windsor chairs. Handles are in the same plane with the blade that allows easy control of the tool, and their direction at an angle to the cutting edge allows for less stress on the wrists.. The 3.5 mm thick blade has a straight cutting edge, made of carbon steel 65G (Germany 66Mn4, Ck67, USA 1066) and hardened to 57-59 HRC. Handles 100mm long made of maple, impregnated with oil and reinforced with a brass ring. Blade length - 135 mm, width 20 mm. Sharpening angle - 30grad. Includes leather case to protect the blade. Totally hand made at PETROGRAD factory of joinery and carpentry tools.

Made in Russia.

 

3 000p(37.48) In stock

Waxy polishing pastes in the form of a rectangular bar. Dimensions - 60x60x15mm. The granularity is large. White - 600grit. Weight - 180g. Used for grinding and polishing on wheels, belts, etc. Perfect for hand-held leather bars Petrograd.

Composition: a mixture of grinding powders, binders and auxiliary elements - kerosene, stearin, sodium bicarbonate, silica gel.

Made in Russia.

400p(37.48) In stock

Spoon knife (shallow hook knife).
Used to made a wooden spoons, as well as for other similar works.
The blade width is 8mm, the inner radius of the ring is 15mm. The outer side of the ring has a convex lens-like shape and is polished, which, together with the small width of the blade, allows you to cleanly and smoothly cut wood without scoring and steps.
The total length of the knife is 175 mm; the length of the handle is 130 mm.
Made of  9ХС (150Cr14, 90CrSi, 90CrSi5) steel, hardened to 58-60HRC.The convenient ergonomic oval handle of the knife is made of maple and impregnated with oil.
All knives are sharpened, finished and fully ready for work.
The right-handed version is designed to work with the right hand towards itself, the left-handed version - with the left hand towards itself.
Totally hand made at PETROGRAD factory of joinery and carpentry tools.
Made in Russia

2 100p

Set of butt chisels PETROGRAD, in tool roll, 4 pcs (6,16,20,26 mm). Short chisels PETROGRAD are ideal for precision work, for example in the manufacture of finger joints. Blade length - 95mm; width - 6mm, 12mm, 20mm, 26mm,. Total length - from 200mm. Chisels are specially made focusing on the experience of old masters of carpentry. The blade is made of high-alloy chrome-manganese tool steel and hardened to 60HRc. The edges of the web are chamfered towards the edges, but at the same time the edges of the web have a constant thickness. This design allows you to work comfortably in hard to reach places and especially with dovetail connections. The handle is made of hornbeam wood, the size of the handle is 105x30mm. Uncoated handle - the craftsman chooses the finish himself. The handle at the junction with the blade is reinforced with a brass ring with a leather pad There is also a set of chisels in a twist bag

4 870p

Carving knives for general use, as well as for large material removal. Blade length 40mm or 60mm, rounded butt. A comfortable oval redwood handle is saturated with oil and covered with shellac. The length of the handle - 115mm. Excellent knife for both beginners and professionals. The 2.5 mm thick blade is made of high carbon steel hardened to 59-61 HRc. All the knives are sharpened and ready to go. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
 
900p

Carving knives with a straight butt and a curved cutting edge are great for strength work. Blade length 45mm or 60mm. The length of the handle - 115mm. The 2.5 mm thick blade is made of high carbon steel hardened to 59-61 HRc. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
 
950p

Water stones. Grain size: 150, 360, 500, 1000, 1500 and 2000. Size 15х15х120mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Made in Russia.

 

630p

Carving knives with a bevel angle of 30, 37, 40 degrees double-sided sharpening. Blade length - 40 mm, width 13 mm, straight butt. A comfortable maple oval handle is saturated with oil and covered with shellac. The length of the handle - 115 mm. Knife for a wide range of works. The 2.5 mm thick blade is made of 65G (Germany 66Mn4, Ck67, USA 1066) steel,  hardened to 59-61 HRc. Sharpened and ready to go.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

 

900p

Cylindrical water stones. Grain size: 240, 500, 1000. Size D15*120mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Made in Russia.

To select and order an abrasive stone of desired grain size, click on the name of the product.

1 830p

Marking knives PETROGRAD have a unilateral right or left sharpening and bevel at an angle of 30 and 45 degrees. The blade of the knife is made of high carbon steel and hardened to 59HRC, it passes through the entire handle - this allows you to use it not only as a marking knife, but also as a power knife jamb. Blade thickness - 1.7mm, width - 19mm. The lining is made of beech wood, covered with tung oil and fastened with brass rivets. The length of the knife is 165mm, the blade is 70mm.

900p

Carving knives for general use, as well as for large material removal. Blade length 56 mm or 38 mm, beveled butt. Comfortable oval maple handle soaked in oil. The length of the handle - 130mm. Excellent knife for both beginners and professionals. The 1.8 mm thick blade is made of 65G high carbon steel (Germany 66Mn4, Ck67, USA 1066), hardened to 59-61 HRc. All the knives are sharpened and ready to go. Totally hand made at PETROGRAD factory of joinery and carpentry tools.Made in Russia.

900p

Tool Roll is designed to store short chisels and knives in the amount of up to 4 pieces. The bag is made of black fabric -100% cotton. The maximum tool length is 180 mm. The length of the tool roll in expanded form - 360 mm, width 200 mm. Compartment for chisels has a strap - to close the cutting part. Lacing is provided for fixing the twist bag. Made in Russia.

350p