Wooden moulding plane PETROGRAD, ogee N6



Rating : (1)
Shipping: worldwide

11000 p (169.18)

Description

Traditional wooden plane. The shoe is made of maple, the sole is made of hornbeam. The wedge is also made of maple, easy to install and remove.This light and beautifully made plane is great for making mouldings. The plane is designed to form a finished profile with the possibility of combining with other profiles to obtain the desired result. 

The plane blade is made of steel 9ХС (DIN - 150Cr14). Hardened to 59-61 HRC. Dimensions: total length 175 mm, thickness minimum 2 mm, thickness maximum 3.4 mm. 
All blades are wedge-shaped with a wedge angle of 0.5 degrees, which favorably distinguishes them from others, and are ideally suited for wooden planes with wedge fixation.
Blades have two sides - one is hard, the other is soft (production feature)
Absolutely every blade is tested with a hardness tester.
The solid side has 2 points from the diamond cone - the test, and the control test.

The manufacturer reserves the right to change the thickness and appearance of the knife without degrading the working qualities of the tool.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.




Share / Save Link:

Specs

Reviews

Instructions ()

Нет файлов

Publications

new

Carving set PETROGRAD, N2

The set includes:

Carving knife PETROGRAD, Bogorodsky type, 155mm/40mm
Carving knife PETROGRAD, Finnish type, 175mm/60mm
Carving knife PETROGRAD, skew 30 deg, 155mm/40mm
Carving knife PETROGRAD, Swedish type, 175mm/60mm
Spoon knife, PETROGRAD, D 27mm, right-handed
Carving chisel, PETROGRAD, 10mm
Textile 6 pocket Tool Roll, PETROGRAD, 360*260mm, for carving knives

 

 

 

 

15000p
Отзывов: 1
Рейтинг:
new

Froe PETROGRAD, model Uglich 300мм

Froe is a special cleaving axe (cleaver) for green woodworking, bodging and spoon making. Long blade and perpendicularly handle make it easy to split wood along the grain. Thick blade back would be good to use with mallet or even log*. Froe axe also good for split logs for fireplace, stove or even for making wood shingles and wooden blanks for spoons.

Edge is lenticular sharpened. Froe "Uglich" by petrograd toolworks is perfect choice for making blanks for spoon making. Froe axe is hand forged and totally made in Saint-Petersburg Russia

8700p
Отзывов: 1
Рейтинг:

Screwdriver PETROGRAD, 8mm*1.2mm*210mm, for plane frog

Frog Adjustment Screwdriver are important tool for hand planes with adjusteble frog. Adjustment screws are deep in constraction of hand plane and cant be reached by short screwdrivers. Screwdriver by Petrograd toolworks are designed and precisely made to comfortably work with adjustment screws of hand plane frog.

  • Scredriver blade made of 9XC tool steel (DIN - 150Cr14)
  • Screwdriver tip hardened to 56-58 HRc
  • Handle is made of sandwich containing two maple parts assembled on metal part with brass rivets.
  • Total screwdriver length 210mm (~8.3")
  • tip width 8mm (~0.31")
  • tip thickness 1.2mm (~0.05")

Frog Adjustment Screwdriver are hand made by Petrograd toolworks and idealy fit with a lot of chipbreaker screws of other famous manufactures. Made in Saint-Petersburg Russia.

2730p
Отзывов: 1
Рейтинг:

Screwdriver PETROGRAD, for plane handles, 10mm*1.4mm*125mm

PETROGRAD screwdrivers are represented by three models. Screwdrivers can be used to adjust the hand tools (planers, saws), and as a gun care screwdriver. The material of the blade is 9XC (DIN - 150Cr14) steel hardened to 56-58 HRc, the handle is made of maple and assembled on brass rivets.

The first model of PETROGRAD screwdriver has a straight tip for installing handles. The total length is 125 mm, the tip size is 10 mm * 1.4 mm. The screwdriver is specifically designed for tightening the screws of the handles and the clamping screw on the planes (except No1), also suitable for other tasks. Exactly fits the size of the slot of the plane screws, which gives the necessary strength without sliding and stalling the slot on the soft brass screws. 

The second model of a PETROGRAD screwdriver has a straight tip for mounting a chip breaker. Total length 125 mm, tip size 12 mm * 1.6 mm. The screwdriver is specially designed for tightening the chipbreaker screw on planes, also suitable for other tasks. Exactly fits the size of the slot of the plane screws, which gives the necessary strength without sliding and stalling the slot on the soft brass screws. 

The third model of a PETROGRAD screwdriver has a straight tip for installing a frog. Total length 210 mm, tip size 8 mm * 1.2 mm. The screwdriver is specially designed for tightening the frog's screws on planes, and is also suitable for other tasks. Exactly fits the size of the slot of the planer screws, which gives the necessary strength without sliding and stalling the slot on the soft brass screws. 

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

2730p
Отзывов: 1
Рейтинг:
new

Carving set PETROGRAD, N11

Carving set PETROGRAD, N11
The set includes:
Carving chisel PETROGRAD, V-type, 60 degree
Carving gouge PETROGRAD, 3mm
Carving gouge PETROGRAD, 6mm
Carving chisel PETROGRAD, 8mm
Textile 4 pocket Tool Roll, PETROGRAD, 360*200mm
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

 

10500p
Отзывов: 1
Рейтинг:

Shallow Hook Knife, PETROGRAD, type 3, right-handed

Hook knife is used for cutting out a hollow in a wooden spoon or scoop, as well as for other similar work. Shallow hook knife N3 has a water drop profile of blade. That's making it perfectly choose for cut wooden spoons bowl. The right version of knife is designed to work with the right hand towards yourself or left hand to outside.

  • Knife blade width - 12mm.
  • Spoon cutter length - 235 mm
  • Handle length - 160 mm
  • Hook knife blade made from tool steel (9ХС) and hardened up to 58-60HRC.
  • All hook cutters are sharpened and ready to go.
  • The outerside of the hook is ring-shaped and perfectly polished. Thats allow you to cut wood cleanly and smoothly without scoring.
  • The handle of the hook knife is made of maple and coated with oil.

The right version of hook knife is designed to work with the right hand towards yourself, the left version - with the left hand towards yourself.
Made by Petrograd toolworks in Saint-Petersburg Russia.

3600p
Отзывов: 1
Рейтинг:

Shallow Hook Knife, PETROGRAD, type 3, left-handed

Hook knife is used for cutting out a hollow in a wooden spoon or scoop, as well as for other similar work. Shallow hook knife N3 has a water drop profile of blade. That's making it perfectly choose for cut wooden spoons bowl. The left version of knife is designed to work with the left hand towards yourself or right hand to outside.

  • Knife blade width - 12mm.
  • Hook cutter length - 235 mm
  • Handle length - 160 mm
  • Hook knife blade made from tool steel and hardened up to 58-60HRC.
  • All hook cutters are sharpened and ready to go.
  • The outerside of the hook is ring-shaped and perfectly polished. Thats allow you to cut wood cleanly and smoothly without scoring.
  • The handle of the hook knife is made of maple and coated with oil.

The right version of hook knife is designed to work with the right hand towards yourself, the left version - with the left hand towards yourself.
Made by Petrograd toolworks in Saint-Petersburg Russia.

3600p
Отзывов: 1
Рейтинг:

Leather fingertip for woodcarvers

Leather fingertip is a thumb guard for wood carvers by Petrograd toolworks. Designed to protect hands from sharp tools. Thumb guard protects your finger from cut injuries when you are moving the cutting tool towards thumb, and prevents the formation of calluses when working away from yourself. Watch pictures for more info.

  • made of 2mm leather
  • easy to use
  • save you from injures

Guard has a special ring that prevents it from slipping during operation. The thimble was made of 2mm soft leather, which provides good protection for the toe.

Thumb guard was made by Petrograd toolworks in Saint Petersburg Russia

600p
Отзывов: 1
Рейтинг:

Edge guard for carpenter's chisel 60mm

Carpenter's chisel cover 60mm wide. Leather covers for chisels Petrograd. Designed to protect the cutting edge from damage and cuts during transportation. Assembled with steel rivets and stitched with thread.

Production - factory of joinery and carpentry tools PETROGRAD.

Made in Russia.
600p
Отзывов: 1
Рейтинг:
new

Wood carving knife 'Axe', PETROGRAD

Нож для резьбы по дереву "Секира", это нож для скульптурной резьбы с радиусной режущей кромкой. Отличительная характеристика этого ножа - сильно выступающий вперед клинок. Эта форма увеличивает полезную длину режущей кромки и позволяет производить работу даже "пяточкой" клинка. Производство фабрика Петроградъ (Россия)
2500p
Отзывов: 1
Рейтинг: