Share / Save Link:

Стамеска ПЕТРОГРАДЪ, серия Вологда, полуклюкарза, н6,20мм



Rating : (1)
Shipping: worldwide

4300 p (66.13) out of stock

Description

Стамеска ПЕТРОГРАДЪ, серия Вологда, полуклюкарза, н6,20мм. Эта полуклюкарза была специально разработана с оглядкой на нужды ложкарей, ее профиль, изгиб полотна и общие габариты и даже внешний вид подобраны исходя и эргономики изготовления деревянной ложки. Основное предназначение данной стамески это выборка черпала у ложек, половников, тарелок и других предметов из дерева. Стамеска подойдет и для классической резьбы при съеме материала. Стамеска комплектуется защитным кожаным колпачком, предохраняющем режущую кромку. Производство фабрика Петроградъ (Россия)
  • надежная кованая стамеска
  • ширина полотна 20 мм
  • рабочая длина полотна 110 мм
  • качественная высокоуглеродистая сталь
  • профиль номер 6
  • закалка 59-61 HRc
  • комплектуется защитным кожаным чехлом

Качественная сталь, проковка и закалка до оптимальной твердости позволяет этой стамески прекрасно сохранять свои режущие свойства долгое время.
Стамеска заточена и отлично режет прямо из коробки. Угол заточки составляет 25 градусов. Фаска и внутренняя часть полотна заполированы в зеркало.

  • угол заточки 25 градусов
  • заточены и доведены
  • полировка в зеркало
  • тип - полуклюкарза

Стамеской очень комфортно работать. Деревянная овальная рукоять приятно лежит в руке и не наминает руку при работе. Вы по достоинству оцените стамески к концу работы над изделием.

  • длина ручки 130мм
  • ручка из древесины ясеня
  • покрыта тонированным маслом
  • общая длина 275 мм

Данная стамеска подойдет, как для съема материала при классической резьбе, и особенно будет оценена любителями изготовления деревянной посуды и особенно ложек и тарелок из дерева.

Для поддержания стамески в рабочем состоянии рекомендуем использовать полировальные пасты и водные камни (смотрите ниже). Производство фабрика Петроградъ (Россия).


abc checkFind out a mismatch? Highlight text and press Ctrl/Cmd + Enter

Share / Save Link:

Specs

Reviews

Instructions ()

Нет файлов

Publications

Recommended products

new

Petrograd Table lamp, `Kraft Lamp` model

Светильник ПЕТРОГРАДЪ, модель "Лампа Ремесленника". Лампа, созданная мастерами для мастеров – надёжность и адаптивность для любых задач! Ремесленная лампа мощностью 7.5 Вт - идеальное сочетание классических форм и материалов, с современными технологиями, для Вашей комфортной работы. Производство – фабрика Петроградъ (Россия) в сотрудничестве с Дмитрием Пушиным.

12800p(66.13)
Отзывов: 1
>Рейтинг:
new

Petrograd Sledge hammer 2.5 kg

Кувалда кованая, ПЕТРОГРАДЪ, 2.5кг. С плоским и полукруглым бойком. Рукоять выполнена из ясеня. Покрыта маслом. На рукояти выполнена обмотка из натуральной кожи. Производство фабрика Петроградъ (Россия).

7300p(66.13)
Отзывов: 1
>Рейтинг:

Textile 16 pocket Tool Roll, PETROGRAD, 370*330mm, for chisels

Tool roll. Size - 370x330mm, 16 pockets. It is intended for storage of tools: cutters, chisels, knives. The maximum tool length is 300mm. Made of thick fabric - Furniture FLOCK, stitched seams.

2210p
Отзывов: 1
Рейтинг:

Petrograd Shovel Gouge 50mm

Стамеска полукруглая плотницкая Тотьма, предназначена для изготовления и зачистки продольных пазов и профилей, например при изготовлении сруба. Так же подойдет для удаления коры и декорирования поверхности на больших площадях. Рекомендована к использованию плотникам. Производство фабрика Петроградъ
14200p
Отзывов: 1
Рейтинг:

Carving knife PETROGRAD, Bogorodsky type, 200mm/60mm

Carving knives for general use, as well as for large material removal. Blade length 40mm or 60mm, rounded butt. A comfortable oval redwood handle is saturated with oil and covered with shellac. The length of the handle - 115mm. Excellent knife for both beginners and professionals. The 2.5 mm thick blade is made of high carbon steel hardened to 59-61 HRc. All the knives are sharpened and ready to go. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

2500p
Отзывов: 1
Рейтинг:

Mallet PETROGRAD, round, D65mm*250mm, 300 g

Wooden mallet, round shape. Solid wood mallets made by woodturning. Mallet weight 300 gramm. Mallets made of beech wood and covered with tung oil. Round mallets used for working with mortise chisels and woodcarving chisels. It used when cutting joints and when carving large elements or sculptures (work from under the mallet).

Production of Petrograd toolworks. Made in Saint Petersburg Russia.

Mallet Specification:
diameter: 65 mm
weight: 300 gramm
material: beech wood
coating: thung oil*
*coating may change from batch to batch
980p
Отзывов: 1
Рейтинг:

Heavy Duty Corner Framing Chisel, PETROGRAD, model Yelnya, 540mm/300mm, 25mm*25mm (1`)

Forged corner carpenter chisel PETROGRAD 25*25 mm with a wooden handle are designed for hard work with wood. The blade is forged manually from steel ШХ15 (USA 52100, G52986, J19965; Germany 1.3505, 100Cr6, 102Cr6) and hardened to a hardness of 58-61 HRC. With the help of machining specified exact geometry. Designed for processing and cleaning the corners of deep grooves. The handles are made of ash and crimped with two stainless rings - one to prevent splitting wood near the handle, the second to harden the back of the bar when working with a mallet or hammer. A leather pad between the chisel and the grip allows you to dampen the blows. Available in 25 mm wide. Blade length 300 mm, total length 550 mm. The guarantee of 100% quality is a small hole on the back of the chisel - a trace from the diamond cone of the device for determining the hardness. This test passes every chisel.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

13900p
Отзывов: 1
Рейтинг:

Bent Gouge Rubankov, N7, 30mm

Bent Gouge Rubankov, N7, 30mm (1.8 inches)

Carving chisel "Rubankov" Bent Gouge N7, 30mm ( 1.8 inches ). Perfectly suits for volume carving and deep hollow carving. The width of the cutting edge is 30mm ( 1.8inches ). The total lenght of the gouge is 280mm (11.02inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 135mm (5.31inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.

Gouge is sharpened, honed and fully ready to work out of the box.
This model is for hand cutting and can be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )

5800p
Отзывов: 1
Рейтинг:

Checkering tool complete N3-20, 60°

Checkering tools from series N3, have two sides: the right side is smooth, used as a guide, the left - with teeth. All the cutters are made of steel, underwent a process of hardening and processing, for long and reliable work. The right blade is devoid of teeth, has a sharp and smooth shape, and exactly follows along the guide line. The left blade has teeth and cuts a new groove during the process of notching from right to left. Thus, it is possible to apply a notch, using the previous groove, as a guide. Beech handle. 

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

850p
Отзывов: 1
Рейтинг:
new

Carving set PETROGRAD, N10

Carving set PETROGRAD, N10
The set includes:
Carving chisel PETROGRAD, V-type, 60 degree
Carving gouge PETROGRAD, 3mm
Carving gouge PETROGRAD, 6mm
Carving gouge PETROGRAD, 8mm
Carving chisel PETROGRAD, 8mm
Textile 6 pocket Tool Roll, PETROGRAD, 360*260mm, for carving knives
Carving knife PETROGRAD, model Hatchet N1, skew, 27mm

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

13200p
Отзывов: 1
Рейтинг:
new

Carving set PETROGRAD, N11

Carving set PETROGRAD, N11
The set includes:
Carving chisel PETROGRAD, V-type, 60 degree
Carving gouge PETROGRAD, 3mm
Carving gouge PETROGRAD, 6mm
Carving chisel PETROGRAD, 8mm
Textile 4 pocket Tool Roll, PETROGRAD, 360*200mm
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
10230p
Отзывов: 1
Рейтинг:

Shallow Hook Knife, PETROGRAD, type 3, left-handed

Hook knife is used for cutting out a hollow in a wooden spoon or scoop, as well as for other similar work. Shallow hook knife N3 has a water drop profile of blade. That's making it perfectly choose for cut wooden spoons bowl. The left version of knife is designed to work with the left hand towards yourself or right hand to outside.

  • Hook knife blade made from tool steel (9ХС) and hardened up to 58-60HRC.
  • All hook cutters are sharpened and ready to go.
  • The outerside of the hook is ring-shaped and perfectly polished. Thats allow you to cut wood cleanly and smoothly without scoring.
  • The handle of the hook knife is made of maple and coated with oil*.

The right version of hook knife is designed to work with the right hand towards yourself, the left version - with the left hand towards yourself.
Made by Petrograd toolworks in Saint-Petersburg Russia.

Hook knife specifications:
Blade width: 12 mm
Blade lenght: 75 mm
Steel: 9ХС
Shape: hook
Handle grip: left-handed
Handle lenght: 160 mm
Total lenght: 235 mm
Weight: 0,1 kg
*coating may change from batch to batch
3600p
Отзывов: 1
Рейтинг: