Share / Save Link:

Heavy Duty Corner Framing Chisel, PETROGRAD, model Yelnya, 470mm/230mm, 25mm*25mm (1`)



Rating : (1)
Shipping: worldwide

13700 p (210.71) out of stock

Description

Стамеска плотницкая ПЕТРОГРАДЪ, угловая, модель Ельня, 470мм/230мм, 25мм*25мм (1"). Угловая кованая плотницкая стамеска с деревянной рукоятью предназначена для силовых работ с древесиной. Предназначена для обработки и зачистки углов глубоких пазов. Производство – фабрика Петроградъ (Россия).

Характеристики стамески:

  • Ручная ковка
  • Сталь: ШХ15
  • Закалка: 59-60 HRc
  • Материал рукояти: ясень
  • Длина клинка: 230 мм
  • Общая длина: 470 мм
  • Ширина клинка: 25 мм
  • Профиль режущей кромки: угол 90 градусов


Рукояти выполнены из ясеня и обжаты двумя нержавеющими кольцами - одно для предотвращения раскалывая древесины возле рукояти, второе для упрочнения тыльника при работе с киянкой или молотком.

Все стамески укомплектованы пластиковыми транспортировочными чехлами, защищающими режущую кромку от повреждения во время транспортировки и хранении плотницкого инструмента. Кожаные чехлы приобретаются отдельно. Также рекомендуется чехол для хранения стамесок, в комплект на входит. Чехол для инструментов, тканевый, 800*140мм.

Внимание! Этот ручной инструмент предназначен и заточен для работ по дереву. Для работы по другим материалам требуется переточка. Не для работы по металлу.
Производитель оставляет за собой право вносить изменения в изделие без предварительного уведомления потребителя. Изменения не влияют на работоспособность и технические характеристики инструмента. Размеры и цвет могут незначительно варьироваться в зависимости от партии выпуска.


Share / Save Link:

Specs

Reviews

Instructions ()

Нет файлов

Publications

Recommended products

Heavy Duty Corner Framing Chisel, PETROGRAD, model Yelnya, 540mm/300mm, 25mm*25mm (1`)

Forged corner carpenter chisel PETROGRAD 25*25 mm with a wooden handle are designed for hard work with wood. The blade is forged manually from steel ШХ15 (USA 52100, G52986, J19965; Germany 1.3505, 100Cr6, 102Cr6) and hardened to a hardness of 58-61 HRC. With the help of machining specified exact geometry. Designed for processing and cleaning the corners of deep grooves. The handles are made of ash and crimped with two stainless rings - one to prevent splitting wood near the handle, the second to harden the back of the bar when working with a mallet or hammer. A leather pad between the chisel and the grip allows you to dampen the blows. Available in 25 mm wide. Blade length 300 mm, total length 550 mm. The guarantee of 100% quality is a small hole on the back of the chisel - a trace from the diamond cone of the device for determining the hardness. This test passes every chisel.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

13900p(210.71)
Отзывов: 1
>Рейтинг:

Heavy Duty Corner Framing Chisel, PETROGRAD, model Yelnya, 270mm/130mm, 25mm*25mm (1`)

Carpentry corner chisel Yelnya, square shape 25x25 mm, wooden handle. This square chisel was designed for processing and cleaning the corners of deep grooves. Chisel handle is strike resistant and can be worked with striking by wooden mallet.

  • hand forged
  • made of steel ШХ15
  • hardened to 58-60 HRc
  • precise machined geometry
  • width 25 mm (square side)
  • blade lenght 100 mm
  • total chisel length 230 mm

The blade is forged by hand from steel ШХ15 and hardened to a hardness of 58-60 HRC. Precise geometry has been machined. The trace on the back of the chisel from the diamond cone of the hardness tester. Each chisel passes this test.

The handles are made of ash and are crimped with two stainless rings - one to prevent splitting of wood near the handle, the second to strengthen the back when working with a mallet or hammer. A leather pad between the chisel and the handle dampens shocks.

Corner chisel made by Petrograd toolworks in Saint Petersbur Russia

Corner chisel Specifications:
Weight: 0.15 kg
Type: corner
Steel: ШХ15
Hardness: 58-60HRc
Handle material: Ash*
Handle lenght: 130 mm
Edge: straight
Sharpening angle: 25 degrees
Blade lenght: 100 mm
Total lenght: 230 mm
 
* material of handles may changes from batch to batch.
** coating oil may changes too
9900p(210.71)
Отзывов: 1
>Рейтинг:

Carving axe PETROGRAD, model Zvenigorod 7, handle n5

Wood carving axe Zvenigorod VII . This axe is made for artistic processing of wood, such as carving sculptures, bowl carving, dish carving and other stuff.

  • Blade width 120 mm
  • Sharpening angle - 25 degrees
  • Hardness - 55-58HRc
  • Handle lenght - 350 mm
  • Full weight - 07 kg

Carving axe Zvenigorod VII is quite small and easy to control. It's weight is about 650g, makes it maneuverable and allows you to work more accurate and precise.

The shape of the axe head was designed for carving operations where palm is resting extreamly close to axe head or even on the axe head. This design helps to exelent control of the axe even during long carving sessions. Grip above the head is used for trimming, stripping. This axe model was based on samples from museum "Rubankov" and finalized taking into account the wishes of wood carvers.

The axe head is hand forged from steel 65Г (spring steel) and hardened to 55 - 58 HRc at the cutting edge and along the entire beard, the rest part is normalized to HB280. This hardening allows you to hit the poll without the risk of creating a cracks in the metal.
Head has mounted to handle on 3 wedges, one along the head eye and two in cross section.

Cutting edge is razor sharp and ready to work out of the box. Sharpening angle - 30 degrees.

Axe handle is made of maple* and coated with Danish oil**. The hatchet handle has a longitudinal bend. In cross-section the handle has the shape of an egg, which is very convenient for good grip while carving. Handle has a hole for hanging.

Woodcarving axe Zvenigorod VII are product of Petrograd toolworks and supplied in a leather case for protection of the cutting edge and easy storage. Made in Saint-Petersburg Russia.

11200p
Отзывов: 1
Рейтинг:

Sharpening stone PETROGRAD, 200*70*20mm, 360 grit

Abrasive water stones. Grit: 150, 360, 500, 800, 1000,1500, 2000 and 4000 grit. Size 200x70x20mm. The abrasive grain is silicon carbide. Bond - ceramics. Hardness I ensures minimal wear of the stone during work. Steel does not overheat when sharpening. Does not require oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Manufactured in Russia.

1700p
Отзывов: 1
Рейтинг:

Sharpening stone PETROGRAD, 200*70*20mm, 120 grit

Abrasive water stones. Grit: 120, 150, 360, 500, 800, 1000,1500, 2000 and 4000 grit. Size 200x70x20mm. The abrasive grain is silicon carbide. Bond - ceramics. Hardness I ensures minimal wear of the stone during work. Steel does not overheat when sharpening. Does not require oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Manufactured in Russia.

2120p
Отзывов: 1
Рейтинг:

Axe Anika, model Tomohawk

Топор Аника, Томагавк, с чехлом. Ультра-легкий топор Томагавк с обухом-молотком. Идеальный инструмент для передвижений налегке и хозяйственной деятельности в лесу. Заточка с микроподводом для работ по сухой и сырой древесине. Вес головы — около 600 грамм. Вес топора — около 800 грамм. Общая длина — 400-450 мм.
9600p
Отзывов: 1
Рейтинг:
new

Vologda Knife, type 1

Нож рабочий ПЕТРОГРАДЪ, серия Вологда, модель N1 – это нож для резьбы по дереву, используемый в том числе при создании деревянных ложек. Производство фабрика Петроградъ (Россия).

3200p
Отзывов: 1
Рейтинг:
new

Set of PETROGRAD chisels, Volga type, 4 items in roll (8, 12, 20, 23mm)

Набор стамесок ПЕТРОГРАДЪ, серия Волга, 4 штуки (8, 12, 20, 32), в сумке-скрутке. Данный набор собран специально таким образом, чтобы с его помощью вы смогли выполнить максимально широкий спектр задач. В набор были помещены самые востребованные размеры стамесок (8, 12, 20, 32) мм. Производство фабрика Петроградъ (Россия).

14900p
Отзывов: 1
Рейтинг:
new

PETROGRAD axe, model Bryansk, handle n9

Топор походный ПЕТРОГРАДЪ, модель Брянск, топорище н9. Предназначен для выполнения бытовых задач: колка дров, подтес колышков и небольших бревен, а также многих других задач. Выкован вручную из стали 65Г, закален до 58-59 HRc. Производство фабрика Петроградъ (Россия).

 

10700p
Отзывов: 1
Рейтинг:
new

Книга "Зодчие Русского Севера"

Миссия книги – изучение и популяризация истории Русского Севера, воплощённой в культурном ландшафте, неотъемлемой частью которого является уникальное деревянное зодчество. Представлены новые исторические и этнографические иллюстрации, памятники деревянной архитектуры, обмеры, которые ранее не были опубликованы. Некоторые из сооружений утрачены и известны лишь по рисункам и фотографиям, многие сохранились и сняты в 2023 г. специально для книги. Это памятники Архангельской, Ленинградской, Мурманской областей и Карелии. Создатели книги хотят привлечь внимание к ветшающим деревянным памятникам, которые еще могут быть спасены – законсервированы и отреставрированы.
3400p
Отзывов: 1
Рейтинг: