Share / Save Link:
Description
Топор Аника, Фин 500, с чехлом. Это топоры для активных видов отдыха, охоты, рыбалки, различных плотницких работ. Топор, созданный по образцам знаменитых финских топоров. Сталь — ШХ15, полный цикл термообработки с зонной закалкой лезвия около 58HRC. Топор имеет ударный обух . Проушина-стакан глубиной — 85 мм. Лезвие зашлифовано.
Рукоять выполнена из ясеня, и покрыта тунговым маслом.
Вес головы — около 1000 грамм.
Общая длина — 500 мм.
РК — около 80-90 мм.
Вес топора — около 1400 грамм.
Стандартная заточка на топоре для работы по дереву.
Комплектуется кожаным чехлом с револьверной застежкой.
Производитель имеет право без предварительного уведомления вносить изменения в изделие, которые не ухудшают его технические характеристики, а являются результатом работ по усовершенствованию его конструкции или технологии производства.
Share / Save Link:
Specs
Reviews
Instructions ()
Publications
Recommended products
Magazine Master&Workshop 2021 № 1 (11)
This is a periodical magazine about woodworking, craftsmen and workshops, about the news of the carpentry world. The best masters share their knowledge and experience with everyone. Illustrated specialized full-color magazine.
Diamond sharpening stone PETROGRAD 200mm*70mm 2000 grit
Diamond sharpening stones PETROGRAD bars are intended for processing high-carbon steels and cast iron products. Diamond bars are monolithic sharpening with a continuous flat diamond layer. The diamond-bearing layer of the bars is made of synthetic diamond micropowders on a copper-tin bond M2-01.
The relative concentration of highly aggressive synthetic diamonds (ASD) is 100%.
Aggressive diamonds provide high productivity. Also, the bars have high abrasion resistance.
Diamond stones do not need to be soaked in water prior to use as they do with abrasive stones, but should be handled with honing oil or water.
Diamond bars are monolithic six-sided, therefore 6 sides are working.
Size, mm - 200x70x3 - LxWxH.
The following grains are available: 7/5 (2000грит)
Carpenter drawknife PETROGRAD N5, Swedish type, 170mm
Hand forged drawknife N5 is a drawknife bent in two directions has an advantage over other non-linear drawknives in convenience and control. Blade was fully hardened through, that allows you to repeatedly honing the blade or his fully re-grind it. Drawknife of this model is good for fast material removing and for debarking.
- blade made of tool steel 65G (Germany 66Mn4, Ck67, USA 1066)
- hardened to 55-58 HRC
- blade length - 170 mm
- blade width - 36 mm
- blade thickness - 6 mm
- sharpening angle - 30 degrees
- handles lenght - 140 mm
- faceted handles are made of beech
- oil based coating
- total lenght of drawknife n5 is 520 mm
- included leather case with a clasp on the buttons
The design of this model of drawknives, as well as it sharpening, is recommended by the Russian Carpenters Union for carpentry work on fitting logs and for debarking. Other kinds of carpentry work may require regrinding.
Drawnkives are made by Petrograd toolworks in Saint Petersburg Russia
| Blade lengh: | 170 mm |
|---|---|
| Steel: | tool steel 65G |
| Shape: | bent in two directions |
| Handle lenght: | 165 mm |
| Weight: | 0,55 kg |
Leather 14 pocket Tool Roll, RUBANKOV
Our leather tool roll-up (roll organizer, chisel roll) is designed for storage woodworking and carving tools: chisels, gouges, mortises, knives. Tool roll pouch grants good organization of your tools and not takes too much space, so you can take it with you when you need it.
- maximum tool length - 280 mm
- made of split leather with double stitching
- 14 pockets
- fixing by two straps
- tool roll dimensions 325 x 430 mm
Tool roll is made of strong split of leather, so it wouldn't cut in pieces by your extremely sharp tool, but we are recommended to use protective caps on edges yet. Tools must be storage with handles inside pockets, blades must be outside.
Made by Petrograd toolworks in Saint Petersburg Russia
| Weight: | 0.34 kg |
|---|---|
| Type: | for chisels and gouges |
| Material: | natural split leather |
| Max tool lenght: | 280 mm |
| Number of pockets: | 14 |
| Lock: | two straps |
Popular goods
Carving knife PETROGRAD, Finnish type, 200mm/60mm
Carving knife PETROGRAD, skew type, 30 degrees
Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ. Ножи-косяки с углом скоса 30, 40 градусов двухсторонняя заточка. Длина лезвия - 40 мм, ширина 13 мм, прямой обух. Удобная овальная рукоять из красного дерева пропитана маслом и покрыта шеллаком. Длина рукояти - 140 мм. Нож для широкого спектра работ. Лезвие толщиной 2,5 мм выполнено из стали 65Г с закалкой до твердости 59-61 HRc. Заточен и готов к работе.
Сделано в России
Adze PETROGRAD, type n3, Svedish style, half round, external bevel
Adze N3 was created on the basis of samples of adzes from Sweden and Norway, whose house-building traditions have the same deep roots as in Russia
Forged tempered to hardness - 58-60HRc. The adze is made of spring steel 65 g (Germany 66Mn4, Ck67, USA 1066). The width of the blade is 75 mm. Overall length - 650 mm. Weight - 1.6 kg.
Totally hand made at PETROGRAD factory of joinery and carpentry tools.
Made in Russia.
Cutting knife PETROGRAD, double bevel 30 deg, 20mm/167mm
Knives jambs with a bevel angle of 30 degrees.
The blade length is shown in the table, the blade thickness is about 2 mm. The blade is made of 65G (Germany 66Mn4, Ck67, USA 1066) steel hardened of 59-61 HRc. Convenient rectangular handle of sapele soaked with oil. Sharpened and ready to go. Knives with a slanting sharpening have a wide range of applications (carving, marking, working with cardboard, marquetry, intarsia, veneering, working with leather, producing musical instruments, modeling and in everyday life).
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
| item code | sharpening, deg | width, mm | length, mm | thickness, mm |
| М00013992 | left-sided | 20 | 180 | 2 |
| М00013991 | right-sided | 20 | 180 | 2 |
| М00013993 | double-sided | 20 | 180 | 2 |
Checkering tool complete C-1, 90°
Checkering tool C-1 has 1 pyramidal tooth. Angle top 90 degrees. All the cutters are made of steel, undergone the process of hardening and processing, for long and reliable work.
It is V-shaped with teeth on both sides. Checkering tool C-1 is designed for applying the original layout of the picture, as well as for deepening the grooves after their application, with other cutters.
The wooden handle is made of beech, well balanced and lies comfortably in your hand.
Pay attention to the high relief, providing fast and smooth cutting. The tines provide good removal of all hardwoods.
The cutter doesnt look like cutting - deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Equal each element is obtained.
The width of the working part is 5 mm, the length of the working part is 11 mm, the apex angle 90 degrees.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
Bit for checkering tool N2-16, 90°
Насадка на резец для чекеринга N2-16, 90° (две РК). Обе стороны с зубчиками. Используется для нанесения канавок и их углубления после нанесения. Одно лезвие проходит вдоль направляющей линии, в то время как другое намечает следующую канавку. При переходе на следующую канавку инструмент углубляет ее и снова наносит следующую канавку. Резец 2 Представляет из себя комбинацию инструментов для расширения и углубления канавок. Обе вершинки являются резцами.
Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ.
Сделано в России
Outdoor axe PETROGRAD, model Roslavl V, curved handle
Small axe Roslavl V (hatchet) with curved handle. Axe has a superior cutting abilities, it's lightweight and short. Would be good choiсe for any outdoor activity like campings, spoon making, making bonfire and etc. This axe is ideal for those who want take a small axe for different ways of use when you are going out and about in the countryside or fishing or hunting.The axe is also excellent for delimbing a tree and making wooden stakes.
- Total lenght is 270 mm ( 10,63 inch )
- Height of axe is 130 mm ( 5,12 inch )
- Lenght of cutting edge is 90 mm ( 3,54 inch )
- Axe is hand forged from 65G steel (Germany 66Mn4, Ck67, USA 1066).
- Curved cutting edge was straight sharpened.
- Total weight of axe is 0,5 kg ( ± 0,05kg )
- Handle lenght is 270 mm ( 10,63 inch) and it is made from solid mapple with right grain position.
- The axe comes with leather case for protecting cutting edge.
Axe is well balanced and would be a good choice for a lot types of work. It will be great as outdoor axe, for small carpentry and othe woodwork projects. This is kind of universal axe for everyone.
Axe Roslavl V produced by Petrograd toolworks in Saint Petersburg Russia.
| Head weight: | 0.34 kg |
|---|---|
| Full weight: | 0.5 kg |
| Type: | outdoor hatchet |
| Steel: | 65Г |
| Hardness: | 55-58HRc |
| Handle material: | Maple* |
| Handle lenght: | 270 mm |
| Edge: | Curved |
| Sharpening angle: | 30 degrees |
| Blade lenght: | 90 mm |
| Total lenght: | 270 mm |
** coating oil may changes too
Chisel handle n18
Рукоять для стамесок n17. Ручка имеет восьмигранную эргономичную форму. Не шлифована, ничем не покрыта, с кольцом. Латунное кольцо придает изысканный вид и предотвращает рукоять от растрескивания. Рукоять изготовлена из ценных пород древесины. Ударная сторона закруглена, чтобы не наминать мозоли на ладонях. В рукояти имеется отверстие для хвостовика стамески.
Производство фабрики столярных и плотницких инструментов ПЕТРОГРАДЪ
Carving set PETROGRAD n18, 6 tools, chisel handles
Набор мини стамесок для резьбы по дереву, ПЕТРОГРАДЪ, N18, 6 предметов. Авторский набор резцов для миниатюрной резьбы по дереву. Эти прекрасные инструменты подойдут для моделистов, любителей миниатюрной резьбы и для максимальной деталировки резьбы. Набор включает четыре полукруглые стамески, одну плоскую стамеску и уголок. Производство Россия.
Chisel & file handle n26
Рукоять для стамесок и напильников n26, 132мм – это великолепная и продуманная ручка. Она может быть применима к стамескам, рашпилям, напильникам. Материал – массив ясеня высшего сорта. Рукоять обладает латунным кольцом. Производство фабрика Петроградъ (Россия).