Share / Save Link:
Description
Square PETROGRAD, ground. Double-sided, 85 * 50mm in size. The square is one of the most used measuring tools in joinery. Ruler width 15 mm. Metric markings in 1 mm increments on the outside and inside, on both sides. The error of the square is 0.05mm per 100mm. It is used not only for checking 90 degree angles, but also for setting up tools, saws and other tools. Also handy for marking with a pencil or a knife. Material - brass. Engraved etched markings for easy reading.
Made in Russia
Share / Save Link:
Specs
Reviews
Instructions ()
Publications
Recommended products
Marking knife PETROGRAD, model N1, arrow form
Marking knives PETROGRAD have a swept blade that is sharpened on 2 faces, which makes it comfortable to use both right-handed and left-handed. One-sided sharpening. The 2.3mm thick blade is made of high carbon steel and hardened to 61HRC. The handle is made of curly maple and saturated with linseed oil. Before the blade on the handle made a comfortable stop to prevent sliding of the hand. The length of the handle is 160mm.Totally hand made at PETROGRAD factory of joinery and carpentry tools.
Made in Russia
| Size | Sharpening angle | Chamfer angle | Length | Weight |
| 28 х 16 | 60° | 45° | 188 | 17 |
| 35 х 14 | 45° | 35° | 195 | 17 |
Petrograd Bevel Setter, 200mm*55mm, for sliding bevels
Petrograd Bevel Setter, 200mm*55mm, for sliding bevels. This is an ingenious tool for setting angles when lining up and for marking or measuring workpieces. Pieces can be positioned freely in line with the etched markings. Special dovetail and polygon markings are on the back, as well as a millimetre scale.
Wooden bench plane PETROGRAD, 50mm/230mm
Classic bench plane with brass cap and wedge shaped blade. This is a common wooden hand plane for surface flattening. Sole of hand plane was made of hard wood. We had replace the wooden wedge with brass cap mechanism for more secure fix and for minimizing vibrations of hand plane blade during the work.
- lenght of sole - 230mm
- width of blade - 50mm
Fixing cap is mounted on a strong steel stud, the knob acts as a lever. This design of the clamping cap allows for quick and accurate adjustment of the blade overhang. Body of hand plane was coated with oil. Blade installation angle - 50 °. The blade made of alloy tool steel and hardened to a hardness of 59-61HRC.
- blade installation angle - 50 °
- blade dimensions: length - 175mm
- blade width - 50mm
- blade shape - wedge
- The minimum thickness of the blade is 2.2 mm, the maximum thickness is 3.5 mm
- The blade sharpening angle is 25 ° and the micro chamfer on the edge is 30 °
Hand plane was produced by Petrograd toolworks in Saint Petersburg Russia.
| Weight: | 0.93 kg |
|---|---|
| Type: | Bench plane N4 |
| Blade Steel: | ШХ15 (alloy tool steel) |
| Blade shape: | wedge |
| Blade hardness: | 59-61HRc |
| Edge blade: | Straight |
| Blade lenght: | 175 mm |
| Blade width: | 50 mm |
| Sole material: | hornbeam |
| Body material: | maple |
| Handle material: | Oak* |
| Sole lenght: | 230 mm |
Popular goods
Carving axe PETROGRAD, model Zvenigorod 7, handle n5
Wood carving axe Zvenigorod VII . This axe is made for artistic processing of wood, such as carving sculptures, bowl carving, dish carving and other stuff.
- Blade width 120 mm
- Sharpening angle - 25 degrees
- Hardness - 55-58HRc
- Handle lenght - 350 mm
- Full weight - 07 kg
Carving axe Zvenigorod VII is quite small and easy to control. It's weight is about 650g, makes it maneuverable and allows you to work more accurate and precise.
The shape of the axe head was designed for carving operations where palm is resting extreamly close to axe head or even on the axe head. This design helps to exelent control of the axe even during long carving sessions. Grip above the head is used for trimming, stripping. This axe model was based on samples from museum "Rubankov" and finalized taking into account the wishes of wood carvers.
The axe head is hand forged from steel 65Г (spring steel) and hardened to 55 - 58 HRc at the cutting edge and along the entire beard, the rest part is normalized to HB280. This hardening allows you to hit the poll without the risk of creating a cracks in the metal.
Head has mounted to handle on 3 wedges, one along the head eye and two in cross section.
Cutting edge is razor sharp and ready to work out of the box. Sharpening angle - 30 degrees.
Axe handle is made of maple* and coated with Danish oil**. The hatchet handle has a longitudinal bend. In cross-section the handle has the shape of an egg, which is very convenient for good grip while carving. Handle has a hole for hanging.
Woodcarving axe Zvenigorod VII are product of Petrograd toolworks and supplied in a leather case for protection of the cutting edge and easy storage. Made in Saint-Petersburg Russia.
Axe Anika, model Tomohawk
Vologda Knife, type 1
Нож рабочий ПЕТРОГРАДЪ, серия Вологда, модель N1 – это нож для резьбы по дереву, используемый в том числе при создании деревянных ложек. Производство фабрика Петроградъ (Россия).
Set of PETROGRAD chisels, Volga type, 4 items in roll (8, 12, 20, 23mm)
Набор стамесок ПЕТРОГРАДЪ, серия Волга, 4 штуки (8, 12, 20, 32), в сумке-скрутке. Данный набор собран специально таким образом, чтобы с его помощью вы смогли выполнить максимально широкий спектр задач. В набор были помещены самые востребованные размеры стамесок (8, 12, 20, 32) мм. Производство фабрика Петроградъ (Россия).
PETROGRAD axe, model Bryansk, handle n9
Топор походный ПЕТРОГРАДЪ, модель Брянск, топорище н9. Предназначен для выполнения бытовых задач: колка дров, подтес колышков и небольших бревен, а также многих других задач. Выкован вручную из стали 65Г, закален до 58-59 HRc. Производство фабрика Петроградъ (Россия).
