Carving knife PETROGRAD, model Hatchet N7, skew
Штихель резчицкий ПЕТРОГРАДЪ, топорик N7, прямая РК. Резчицкий инструмент представлен линейкой прямых стамесок с расширяющимся клинкомИмеют широкий спектр применения при резьбе, является одним из основных ножей в геометрической резьбе, а также удобен и востребован в технике резьбы Whittling.
Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ
Сделано в России
Carving knife PETROGRAD, model Hatchet N1, straight blade, 27mm
The model range consists of straight chisels with an expanding blade with a working part width of 11 mm, 18 mm, 27 mm, 38 mm, 43 mm. They have a wide range of applications for carving, are one of the main knives in geometric carving, and are also convenient and in demand using the Whittling carving technique. Chisels are made of steel 65G (Germany 66Mn4, Ck67, USA 1066) and have handles of maple, covered with tung oil. Sharpening angle - 20 degrees, blade thickness - 2 mm.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia
Carving knife PETROGRAD, model Hatchet N2, straight blade
The model range consists of straight chisels with an expanding blade with a working part width of 11 mm, 18 mm, 27 mm, 38 mm, 43 mm. They have a wide range of applications for carving, are one of the main knives in geometric carving, and are also convenient and in demand using the Whittling carving technique. Chisels are made of steel 65G (Germany 66Mn4, Ck67, USA 1066) and have handles of maple, covered with tung oil. Sharpening angle - 20 degrees, blade thickness - 2 mm.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia
Carving knife PETROGRAD, model Hatchet N3, skew, 43mm
The model range consists of straight chisels with an expanding blade with a working part width of 11 mm, 18 mm, 27 mm, 38 mm, 43 mm. They have a wide range of applications for carving, are one of the main knives in geometric carving, and are also convenient and in demand using the Whittling carving technique. Chisels are made of steel 65G (Germany 66Mn4, Ck67, USA 1066) and have handles of maple, covered with tung oil. Sharpening angle - 20 degrees, blade thickness - 2 mm.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia
Carving gouge PETROGRAD, 3mm
Carving gouges PETROGRAD, half-round cutting edge. These gouges are intended for a carving of middle details and for a detailing of small forms. Made of 65G forged steel (Germany 66Mn4, Ck67, USA 1066). The handles of the gouges are pear-shaped, that allows you to securely and conveniently hold the incisor without tiring the wrist at work. Handle material - maple. Handle coating - oil-wax. The length of the handle - 110 mm. Blade width 3,4,6,8,10 mm.
Chisels are designed for both amateurs and professionals engaged in medium-sized products.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
Штихели резчицкие
Popular goods
Carving knife PETROGRAD, Finnish type, 200mm/60mm
Strop PETROGRAD, two-sided, 200mm*70mm
Double-sided bar with glued leather. The size of the bar is 200x70x25mm. It can be used with polishing pastes. Material - ash, leather - "reversal" 2mm. Skin color may differ from the image on the site. Made in Russia.
Cutting knife PETROGRAD, right-handed skew 30 deg, 20mm/167mm
Knives jambs with a bevel angle of 30 degrees.
The blade length is shown in the table, the blade thickness is about 2 mm. The blade is made of 65G (Germany 66Mn4, Ck67, USA 1066) steel hardened of 59-61 HRc. Convenient rectangular handle of sapele soaked with oil. Sharpened and ready to go. Knives with a slanting sharpening have a wide range of applications (carving, marking, working with cardboard, marquetry, intarsia, veneering, working with leather, producing musical instruments, modeling and in everyday life).
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
| item code | sharpening, deg | width, mm | length, mm | thickness, mm |
| М00013992 | left-sided | 20 | 180 | 2 |
| М00013991 | right-sided | 20 | 180 | 2 |
| М00013993 | double-sided | 20 | 180 | 2 |
Bent Gouge Rubankov, N6, 20mm
Bent Gouge Rubankov, N6, 20mm (0.79 inches)
Carving chisel "Rubankov" Bent Gouge N6, 20mm ( 0.79 inches ). Perfectly suits for volume carving and deep hollow carving. The width of the cutting edge is 20mm ( 0.79inches ). The total lenght of the gouge is 425mm ( 16.73inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 280mm (11.02inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.
Gouge is sharpened, honed and fully ready to work out of the box.
This model is for hand cutting and can be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )
Carving set PETROGRAD, N4, 6 knives
The set includes:
Carving knife PETROGRAD, Bogorodsky type, 155mm/40mm
Carving knife PETROGRAD, Finnish type, 160mm/45mm
Carving knife PETROGRAD, skew 40 deg, 145mm/40mm
Carving knife PETROGRAD, Swedish type, 175mm/60mm
Spoon knife, PETROGRAD, D 27mm, right-handed
Carving knife PETROGRAD, model Parrot, 165/25mm
Textile 6 pocket Tool Roll, PETROGRAD, 360*260mm, for carving knives
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
Sharpening stone PETROGRAD, 200*70*20mm, 4000 grit
Water stone. 2000 grit. Size 200*70*20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Used for sharpening and setting bevels.
High sharpening performance, second only to diamond, is ensured by the use of silicon carbide abrasive grains, which are notable for their sharpness and brittleness. The high hardness of carbide-silicon grinding materials allows you to confidently process not only carbon steels, but also hard alloys, which is impossible on stones made of electro-alumina powders. In addition to performance, it is worth noting the extraordinary tactile sensations when sharpening a tool. Stones quickly give a slurry and produce a very pleasant sound.
Water stones PETROGRAD are distinguished by high performance and geometry in a state of delivery.
In the characteristic of a water stone are specified: the first letter - hardness (I, J - soft, K - average); Japanese grain size according to JIS R6001-1987 is 150 (80 microns), 360 (34 microns), 500 (24 microns), 1000 (12 microns), 2000 (6 microns) and C is silicon carbide.
Comparison of FEPA, JIS and GOST standards:
Leather strops PETROGRAD, 200mm*70mm, 5 pcs
Набор для полирования N1, ПЕТРОГРАДЪ, кожа 200мм*70мм, 5 штук. Набор кожаных накладок предназначен для доводки столярного и плотницкого инструмента, полукруглых резчицких стамесок, скобелей, ножей и другого режущего инструмента.
Производство - Россия
Sharpening stone PETROGRAD, 200*70*20mm, 2000 grit
Water stone. 2000 grit. Size 200*70*20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Used for sharpening and setting bevels.
High sharpening performance, second only to diamond, is ensured by the use of silicon carbide abrasive grains, which are notable for their sharpness and brittleness. The high hardness of carbide-silicon grinding materials allows you to confidently process not only carbon steels, but also hard alloys, which is impossible on stones made of electro-alumina powders. In addition to performance, it is worth noting the extraordinary tactile sensations when sharpening a tool. Stones quickly give a slurry and produce a very pleasant sound.
Water stones PETROGRAD are distinguished by high performance and geometry in a state of delivery.
In the characteristic of a water stone are specified: the first letter - hardness (I, J - soft, K - average); Japanese grain size according to JIS R6001-1987 is 150 (80 microns), 360 (34 microns), 500 (24 microns), 1000 (12 microns), 2000 (6 microns) and C is silicon carbide.
Comparison of FEPA, JIS and GOST standards:
Petrograd Bushcraft Bent Gouge, n7, 30mm
Стамеска-ложкорез Петроград клюкарза N7, 30мм. Стамеска-ложкорез предназначена для создания ложек, кукс, а также прекрасно подойдет резьбы по дереву. Стамески клюкарзы используются для выполнения глубокой барельефной резьбы. Также удачно подходит для выборки углублений при резьбе посуды, кукс, ложек и декорировании деревянной поверхности.
Масло камелии, KAPLEUM, Апельсин, 60 мл.
Масло камелии, KAPLEUM, Апельсин, 60 мл. Неформальная творческая группа GILDIA.PRO предлагает новый продукт, изготовленный на основе отлично зарекомендовавшего себя масла Камелии – KAPLEUM.