Set of PETROGRAD chisels, Volga type, 4 items in roll (8, 10, 16, 20mm)



Rating : (1)
Shipping: worldwide

12100 p (186.1)

Description

Набор стамесок столярных Петроградъ, серия Волга, 4 штуки. Данный набор собран специально таким образом, чтобы с его помощью вы смогли выполнить максимально широкий спектр задач. В набор были помещены самые востребованные размеры стамесок (8, 10, 16, 20 мм).

Столярные стамески по дереву, серия Волга спроектированы, ориентируясь на многолетний опыт мастеров-краснодеревщиков. Форма лезвия имеет боковые скосы для работы в труднодоступных местах, например, при подрезке и подчистке шиповых соединений: ласточкин хвост, шип-проушина, впол дерева, сковородней и прочие. Производятся с различной шириной полотна от 8мм до 20мм. Толщина лезвия переменная и увеличивается от режущей кромки к рукояти. Производство фабрика Петроградъ (Россия)

  • для подрезки
  • для зачистки
  • не для долбления (для долбления гнёзд исп. долота)

Полотно изготовлено из инструментальной высоколегированной стали и закалено до твердости 59-61HRc. Спинка столярной стамески или рабочая сторона выровнена на плоскошлифовальных станках.

  • надежная инструментальная сталь
  • крепкая режущая кромка
  • эргономичная деревянная рукоять

Стамески Волга производства фабрики Петроградъ заточены и готовы к работе. Заводской угол заточки 25 градусов, рекомендуется наведение микрофаски в 30 градусов на мелком абразиве выше 3000 грит.

Деревянная рукоять выполнена из твердых пород древесины, усилена латунным кольцом для силовой работы с киянкой.

  • остро заточена
  • возможна работа с киянкой
  • транспортировочная защита воском

Набор стамесок 4 шт серии Волга поставляется в тканевой сумке-скрутке. Полотна стамесок смазаны защитным инструментальным воском, перед работой воск необходимо стереть сухой тряпкой или бумажным полотенцем. При длительном хранении рекомендуется консервация воском Петроградъ.

Характеристики столярной стамески Волга в наборе:

  • Угол заточки режущей кромки 25 градусов
  • Угол наклона бокового скоса стамески составляет 55 градусов
  • Полотно закалено до твердости 59-61HRc
  • Ширина полотна 8-20 мм
  • Общая длина - от 280 мм
  • Длина рукояти с кольцом 130мм
  • Длина лезвия 150 мм
  • Толщина лезвия у режущей кромки 3 мм, у рукояти 5 мм

 


Share / Save Link:

Specs

Reviews

Instructions ()

Нет файлов

Publications

Recommended products

Sharpening set PETROGRAD N6, for woodworking tools, 3 stones

Набор заточной ПЕТРОГРАДЪ N6, для столярных инструментов, 3 камня (рекомендован Ф.А.Бондаревым). Зернистость: 800, 4000 и 6000. Размер 200х70х20мм. Абразивное зерно - карбид кремния. Связка - керамика. Твёрдость I обеспечивает минимальный износ камня при работе. При заточке не перегревается сталь. Не требует использования масла. Перед использованием замочить в воде на 2-10 мин. Используются для заточки и задания скосов.  Абразивный камень Петроградъ Бриз #4000, водный камень на основе кварцевого зерна 3мкм. на керамической связке, имеющий в маркировке указание зернистости по Jis.
Камни 3000 и 6000грит производятся в  Япония, по заказу фабрики ПЕТРОГРАД. Ориентированы под наши размеры.

С марта 2016 года для брусков, выпускаемых под торговой маркой " Петроградъ" будет применяться новая маркировка характеристики.
Формат кода характеристики: "Материал"_"Зернистость"_"Связка"_"Твёрдость"

10240p(186.1)
Отзывов: 1
>Рейтинг:

Sharpening stone PETROGRAD, 200*70*20mm, 120 grit

Abrasive water stones. Grit: 120, 150, 360, 500, 800, 1000,1500, 2000 and 4000 grit. Size 200x70x20mm. The abrasive grain is silicon carbide. Bond - ceramics. Hardness I ensures minimal wear of the stone during work. Steel does not overheat when sharpening. Does not require oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Manufactured in Russia.

1800p(186.1)
Отзывов: 1
>Рейтинг:

Non slip mat for sharpening

Коврик для заточки инструмента, 250мм*100мм. Используется для работы с заточными абразивными камнями. Препятствует скольжению абразивных камней по рабочему столу тем самым обеспечивает комфортную работу. Изготовлен из высококачественного силикона толщиной 0,5мм. Легко отмывается от шлама. Предохраняет рабочий стол от царапин и повреждений.

Сделано в России

600p(186.1)
Отзывов: 1
>Рейтинг:

Petrograd Brass Square 85mm, two-side marking

Elbow flat PETROGRAD, 85mm * 50mm, double-sided. The square is one of the most used measuring tools in joinery. Ruler width 15 mm. Metric markings in 1 mm increments on the outside and inside, on both sides. The error of the square is 0.05mm per 100mm. It is used not only for checking 90 degree angles and marking, but also for setting up tools, saws and other tools. Material - brass. Engraved etched markings for easy reading.

Production of the PETROGRAD factory.

1000p(186.1)
Отзывов: 1
>Рейтинг:
new

Bevel edge chisel, PETROGRAD, model Volga, 26mm

Bevel edge chisel Volga. These chisels have a classic design with blades that are bevel-edged to a narrow land on each side, providing excellent clearance when trimming into an angled corner such as in dovetail work, as well as reducing sidewall friction when working in a tight recess.

  • blade lenght - 150 mm
  • blade width - 26 mm
  • blade is made of high-alloyed chrome-manganese steel
  • hardened to 59-61 HRc
  • basic edge angle - 25 degrees
3200p(186.1)
Отзывов: 1
>Рейтинг:
new

Bevel edge chisel, PETROGRAD, model Volga, 12mm

Стамеска ПЕТРОГРАДЪ, серия Волга, 12 мм. Производятся шириной от 3мм до 50мм. Кованые стамески Волга спроектированы, ориентируясь на многолетний опыт мастеров-краснодеревщиков.
Форма лезвия имеет боковые скосы для работы в труднодоступных местах, например при доработке шиповых соединений и соединений на ласточкин хвост. Толщина лезвия переменная и увеличивается от РК к рукояти.
Полотно из инструментальной высоколегированной стали, закалено до 61HRc. Спинка столярной стамески или рабочая сторона выровнена на плоскошлифовальных станках. Стамески Волга производства фабрики Петроградъ заточены и готовы к работе. Заводской угол заточки 25град.
Деревянная рукоять выполнена из твердых пород древесины, усилена латунным кольцом для силовой работы с киянкой.
3000p(186.1)
Отзывов: 1
>Рейтинг:

Apron RUBANKOV, model 4, light-brown

Фартук Столярный Rubankov кожаный, светло-коричневый. Длина фартука - 800 мм, ширина - 680 мм. Нагрудный карман c 1 отделением. Размеры нагрудного кармана - длина 150 мм, ширина 175 мм. Лямки и поясной ремень оборудованы застежками и пряжками. Цвет фартука - светло-коричневый. На фартук нанесен логотип Rubankov. Материал - 100 % натуральная кожа, металлическая фурнитура.
Сделано в России.

12000p(186.1)
Отзывов: 1
>Рейтинг:

Apron RUBANKOV, model 3, dark-brown

Фартук RUBANKOV, модель 3, тёмно-коричневый блестящий. Фартук выполнен из высококачественной кожи, чуть ниже колен, с передним разрезом для удобства работы. Верхняя лямка легко и быстро регулируется по длине. Нагрудный карман под карандаши, ручки, маленькую линейку или рулетку. Также имеется нижний сквозной карман. Для различного небольшого подручного инструмента или просто место отдыха для рук. Карманы прошиты и проклепаны латунными заклепками для усиления. Кожаный фартук это средство индивидуальной защиты. Предохраняет вас и вашу одежду от загрязнений и повреждений.

Производство фабрики Петроградъ

9000p(186.1)
Отзывов: 1
>Рейтинг:

Carpenter drawknife PETROGRAD N5, Swedish type, 270mm

The forged drawknife bent in two directions has an advantage over other non-linear drawknives in convenience and control. The blade is forged manually from tool steel 65G (Germany 66Mn4, Ck67, USA 1066) and hardened to 55-58 HRC. Handles 140 mm long are made of beech and impregnated with oil. Blade length - 270 mm, width 36 mm. Blade thickness - 6 mm, sharpening angle - 30 degrees. Comes in a leather case with a clasp on the buttons. The total length of the drawknife is 650 mm. The design of the drawknives, as well as their sharpening, is recommended by the Russian Carpenters Union for debarking and carpentry work on fitting logs. Other kinds of carpentry work may require regrinding. Blade was fully hardened through, that allows you to repeatedly honing the blade or his fully re-grind it. Totally hand made at PETROGRAD factory of joinery and carpentry tools.

Made in Russia.

7200p
Отзывов: 1
Рейтинг:

Carpenter drawknife PETROGRAD N11, u-shaped, with raised arms, 270mm

A flat drawknife with curved and perpendicular cutting edge with handles will be convenient for various operations both in woodworking and carpentry: precise fit of logs in size, manufacture of seats, quick material removal in joinery, etc. Handles are raised above the blade plane and allow work closely to the treated surface. The blade is forged manually from tool steel 65G (Germany 66Mn4, Ck67, USA 1066) and hardened to 55-58 HRC. Sharpening - chamfering up. Handles 140 mm long are made of beech and impregnated with oil. Blade length - 270 mm, width 36 mm. Blade thickness - 6 mm, sharpening angle - 30 degrees. Comes in a leather case with a clasp on the buttons. The design of the drawknives, as well as their sharpening, is recommended by the Russian Carpenters Union for debarking and carpentry work on fitting logs. Other kinds of carpentry work may require regrinding.Blade was fully hardened through, that allows you to repeatedly honing the blade or his fully re-grind it. Totally hand made at PETROGRAD factory of joinery and carpentry tools.

Made in Russia.

5300p
Отзывов: 1
Рейтинг:

Sharpening stone PETROGRAD, 200*70*20mm, 800 grit

Water stones. Grain size: 150, 360, 500, 1000, 1500, 2000 and 4000 grit. Size 200*70*20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Made in Russia.

 

2060p
Отзывов: 1
Рейтинг:

Carving knife PETROGRAD, Bogorodsky type, 170mm/40mm

Carving knives for general use, as well as for large material removal. Blade length 40mm or 60mm, rounded butt. A comfortable oval redwood handle is saturated with oil and covered with shellac. The length of the handle - 115mm. Excellent knife for both beginners and professionals. The 2.5 mm thick blade is made of high carbon steel hardened to 59-61 HRc. All the knives are sharpened and ready to go. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
 
2400p
Отзывов: 1
Рейтинг:

Natural lapping stone PETROGRAD, 200*70*20mm

Lapping stone from gabbro diabase. Used for lapping the soles of planes, abrasive stones and other surfaces. It has a perfectly smooth surface. Lapping is carried out with abrasive powders or diamond pastes. Approximate dimensions: 200x70x20 mm. Made in Russia.

2400p
Отзывов: 1
Рейтинг:
new

Froe PETROGRAD, model Uglich 300мм

Froe is a special cleaving axe (cleaver) for green woodworking, bodging and spoon making. Long blade and perpendicularly handle make it easy to split wood along the grain. Thick blade back would be good to use with mallet or even log*. Froe axe also good for split logs for fireplace, stove or even for making wood shingles and wooden blanks for spoons.

Edge is lenticular sharpened. Froe "Uglich" by petrograd toolworks is perfect choice for making blanks for spoon making. Froe axe is hand forged and totally made in Saint-Petersburg Russia

8000p
Отзывов: 1
Рейтинг:

The book `Practical course of woodworking art` + Atlas of drawings, M. Netyksa

The fundamental book on the treatment of wood for professionals and amateurs, which was the basic textbook on woodworking, the entire first half of the twentieth century. Moscow 1901 / Reprint edition of St. Petersburg 2016. Format 145x215 mm, hard fabric binding, 680 pages, 755 illustrations. Also available is a set of drawings attached to the 1901 edition. The author is M. A. Netyksa, a member of the Scientific Department of the Society for the Distribution of Technical Knowledge.

Table of contents.
Division I.
Chapter I. The wood, its structure and properties ... The age of the twood ... The color of the wood ... The density of the wood ...
Chapter II Cutting wood into boards ... Machine sawing boards ... Diseases, defects and structural features of wood ...
Chapter III Various wood species ...
Chapter IV Chemical painting of wood ... Coloring methods and preparation of dye solutions ...
Division II.
Chapter I. The workbench and some adaptations to it ...
Saws and sawing ...
Chapter II Measuring, marking and testing instruments ... Compasses ...
Chapter III Cleaving, curing, cutting and planing ... Planes and planing ...
Chapter IV Rasps and filings ...
Chapter V. Drills and drilling ... Devices and devices for turning various drills ...
Chapter VI. Chisels ... Slotters ...
Chapter VII Various tools and accessories ... Devices for gluing ...
Chapter VIII. Sharpening  ...
Chapter IX The device and acquisition of a workshop ...
Division III. Different types of wooden joints ...
Division IV. Wooden surface finish ...
Division V. Furniture joinery ...
Division VI. Model business ...
Division VII. Machine building ...

2200p
Отзывов: 1
Рейтинг:

Sharpening stone PETROGRAD, 200*70*20mm, 4000 grit

Water stones. Grain size: 150, 360, 500, 1000, 1500, 2000 and 4000 grit. Size 200*70*20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Made in Russia.

 

3440p
Отзывов: 1
Рейтинг:

Leather Knife PETROGRAD, type 3, double bevel

Leather Knife PETROGRAD, type 3, double bevel
The saddle knife is designed for cutting and roughing leather. Can be used for straight cuts and trimming of leather.
Produced in Russia at the PETROGRAD factory
4200p
Отзывов: 1
Рейтинг:

Shallow Hook Knife, PETROGRAD, type 3, left-handed

Hook knife is used for cutting out a hollow in a wooden spoon or scoop, as well as for other similar work. Shallow hook knife N3 has a water drop profile of blade. That's making it perfectly choose for cut wooden spoons bowl. The left version of knife is designed to work with the left hand towards yourself or right hand to outside.

  • Knife blade width - 12mm.
  • Hook cutter length - 235 mm
  • Handle length - 160 mm
  • Hook knife blade made from tool steel and hardened up to 58-60HRC.
  • All hook cutters are sharpened and ready to go.
  • The outerside of the hook is ring-shaped and perfectly polished. Thats allow you to cut wood cleanly and smoothly without scoring.
  • The handle of the hook knife is made of maple and coated with oil.

The right version of hook knife is designed to work with the right hand towards yourself, the left version - with the left hand towards yourself.
Made by Petrograd toolworks in Saint-Petersburg Russia.

3600p
Отзывов: 1
Рейтинг: