Set of bench chisels, in tool roll, 6 pcs (6,8,10,12,20,32 mm)



Rating : (1)
Shipping: worldwide

9700 p (149.19) out of stock

Description

Set of bench chisels PETROGRAD. The length of the blade - from 120mm to 160mm; width - 6mm, 8mm, 10mm, 12mm, 20mm, 32mm. Overall length - from 250mm to 295mm.These chisels have a classic design with blades that are bevel-edged to a narrow land on each side, providing excellent clearance when trimming into an angled corner such as in dovetail work, as well as reducing sidewall friction when working in a tight recess. Chisels are made focusing on the experience of old masters of woodworking. The blade is made of high-alloyed chrome-manganese steel and hardened to 60HRc. Comfortable hornbeam handle. The handle at the junction with the blade reinforced brass ring with leather gasket. 


Share / Save Link:

Specs

Reviews

Instructions ()

Нет файлов

Publications

Carpenter drawknife PETROGRAD N11, u-shaped, with raised arms, 170mm

A flat drawknife with curved and perpendicular cutting edge with handles will be convenient for various operations both in woodworking and carpentry: precise fit of logs in size, manufacture of seats, quick material removal in joinery, etc. Handles are raised above the blade plane and allow work closely to the treated surface. The blade is forged manually from tool steel 65G (Germany 66Mn4, Ck67, USA 1066) and hardened to 55-58 HRC. Sharpening - chamfering up. Handles 140 mm long are made of beech and impregnated with oil. Blade length - 170 mm, width 36 mm. Blade thickness - 6 mm, sharpening angle - 30 degrees. Comes in a leather case with a clasp on the buttons. The design of the drawknives, as well as their sharpening, is recommended by the Russian Carpenters Union for debarking and carpentry work on fitting logs. Other kinds of carpentry work may require regrinding.Blade was fully hardened through, that allows you to repeatedly honing the blade or his fully re-grind it. Totally hand made at PETROGRAD factory of joinery and carpentry tools.

Made in Russia.

4700p
Отзывов: 1
Рейтинг:
new

Carving knife PETROGRAD, skew type, 30 degrees

Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ. Ножи-косяки с углом скоса 30, 40 градусов двухсторонняя заточка. Длина лезвия -  40 мм, ширина 13 мм, прямой обух. Удобная овальная рукоять из красного дерева пропитана маслом и покрыта шеллаком. Длина рукояти - 140 мм. Нож для широкого спектра работ. Лезвие толщиной 2,5 мм выполнено из стали 65Г с закалкой до твердости 59-61 HRc. Заточен и готов к работе. 

Сделано в России

2400p
Отзывов: 1
Рейтинг:

Textile 6 pocket Tool Roll, PETROGRAD, for carving knives

This tool roll is designed to store short chisels and knives in an amount of up to 6 pieces. The bag is made of black cotton fabric. The maximum tool length is 180 mm. The length of the tool roll in expanded form -360mm. Compartment for chisels has a strap - to close the cutting part of the knives. Lacing is provided for fixing the twist bag. Made in Russia.

600p
Отзывов: 1
Рейтинг:

Sharpening set PETROGRAD N3, for knives, 3 stones

Water stones. Grain size: 150, 360, 500, 1000, 1500 and 2000. Size 15х15х120mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Made in Russia.

To select and order an abrasive stone of desired grain size, click on the name of the product.

 

2900p
Отзывов: 1
Рейтинг:

Center finding dowel/tenon pin set PETROGRAD, D5 mm, 6 pcs

Center finding pins for furniture dowels. Diameter of punch: 5 mm, 6 mm, 8 mm, 10 mm, 12 mm. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

380p
Отзывов: 1
Рейтинг:

Center finding dowel/tenon pin set PETROGRAD, D6 mm, 6 pcs

Center finding pins for furniture dowels. Diameter of punch: 5 mm, 6 mm, 8 mm, 10 mm, 12 mm. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

460p
Отзывов: 1
Рейтинг:
new

Outdoor axe PETROGRAD, model Roslavl X, staright handle

Outdoor axe. Overall length - 580 mm. Axe height - 175 mm. The length of the cutting edge - 165 mm. The axe is forged by hand from 65G (Germany 66Mn4, Ck67, USA 1066) steel. Sharpening straight. Total weight - 1 kg. Includes leather case to protect the blade. The axe handle is made of maple wood, 500 mm long. The axe is perfectly balanced and is suitable for an enormous type of work, like a hiking axe, for small carpentry and carpentry works, and simply as a universal axe.

Totally hand made at PETROGRAD factory of joinery and carpentry tools.

Made in Russia.

11500p
Отзывов: 1
Рейтинг:

Strop PETROGRAD, model 2, for carving tools, 200mm*70mm

The bar with glued leather is designed for finishing semi-circular chisels, drawknives, etc. One of the flat sides can also be used for fine-tuning of flat tools. The size of the bar is 200x70 mm. Min radius - 6.5mm, max. radius - 12mm. It can be used with polishing pastes. Material - ash, leather - reversal 2mm. Leather color may differ from the image on the site. Made in Russia.

1200p
Отзывов: 1
Рейтинг:

Carving chisel, PETROGRAD, V-type, 60 degrees

 Carving chisel, PETROGRAD, V-type, 60 degrees. It is intended for carving of medium-sized parts and small-scale detailing, it can also be used as a marking tool for “Checking” (notch on the butts). Made in 65G (Germany 66Mn4, Ck67, USA 1066) forged steel. The handle is barrel-shaped, which allows you to securely and conveniently hold the chisel without tiring the wrist. Handle material - beech. Coating oil wax. The length of the handle - 140 mm, full length - 175 mm, width - 7 mm

Chisels are designed for both amateurs and professionals engaged in medium-sized products.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

2000p
Отзывов: 1
Рейтинг:

Dressing stone, PETROGRAD, 20*20*70mm

Slurry stone PETROGRAD # 4000, water stone based on quartz grain 3 microns. on a ceramic bond, having an indication in the marking of grit according to Jis.

Nagura # 4000 for surface correction and soaping
This stone is used to correct small irregularities after sharpening and leveling shallow scratches on the surface of the stone.

To fully enjoy your stones, use Nagura before and after work. It cleans the surface of the grinding stone, allowing you to keep it in working condition. Please use a bar with enough water.

Size is about 70*20*20 mm
Gross weight 45 g
Net weight 34 g

520p
Отзывов: 1
Рейтинг: