Categories
Share / Save Link:
- ВКонтакте
- РћРТвЂВВВВВВВВнокласснРСвЂВВВВВВВВРєРСвЂВВВВВВВВ
- РњРѕР№ Р В Р’В Р РЋРЎв„ўР В Р’В Р РЋРІР‚ВВВВВВВВРЎР‚
- Viber
- Skype
PETROGRAD Workbench's hardware kit N2
Склад магазина в Петербурге: 0 шт.
Склад магазина в Москве: 0 шт.
red" title="Reserved, Out of stock в наличии">Reserved, Out of stock
Shipping:
worldwide
Payment:
2600
p
(0)
Description
Finishing oil PETROGRAD for workbenches and tool handles, 0.5l. Primer, used to apply the first coat before finishing. Recommended for use on hard or absorbent wood. Recommended for workbenches, tables, handles, woodworking tools and other woodworking parts. For indoor use only. It quickly and deeply penetrates the material and also quickly polymerizes.
Composition:
Tung oil, linseed oil, modified oils (linseed, tung, safflower, walnut), ricin oil, carnauba wax, micronized wax.
Mode of application:
Apply oil evenly to the prepared surface free of dirt and grease using a brush or lint-free cloth. After 10 minutes, wipe off the remaining oil from the surface with a dry, lint-free cloth. After 8 hours (depending on layer thickness and ambient temperature) apply a second coat. Ensure good ventilation of the room, both during application and at the end of work.
Note:
Certain oily, exotic or brightly colored woods and excessive amounts can prevent the oil from drying or greatly slow down the drying process. In this case, good ventilation is needed to speed it up.
- Do not use nitrile gloves for work.
- Safe for hands
- Always wear protective goggles when working.
Storage:
In a sealed container. It should be kept away from sources of fire and sparks.
These round bench rests are made from solid beech and easily fit into a table or workbench with a 19 mm hole. The smooth surface of the stops makes them easy to fit into the hole. Stop length 50 mm, head: Ø 30 mm, height 15 mm, body: Ø 18.5-18.8 mm, height 35 mm. Includes 4 pcs.
Fan gasket for bench press. Size 40x120 mm consists of 7 slats (4,5,5,5,5,5,10 mm). This simple device is designed to help prevent the vise from skewing and jamming by clamping the workpiece to one side of the vise. Just fit as many fan-shaped spacers as you need so that the thickness of the fan-shaped insert is approximately the same as the thickness of your part. When clamping parts with a thickness of more than 40 mm, it is recommended to use junk pieces of wood together with the fan to compensate for the skew. This keeps your workpiece securely in place and prevents the vise mechanism from skewing and jamming. The gaskets are made of various types of wood and have an aesthetic appearance.
Production - factory of joinery and carpentry tools PETROGRAD.
Made in Russia
Are you sure?
Find out a mismatch? Highlight text and press Share / Save Link:
- ВКонтакте
- РћРТвЂВВВВВВВВнокласснРСвЂВВВВВВВВРєРСвЂВВВВВВВВ
- РњРѕР№ Р В Р’В Р РЋРЎв„ўР В Р’В Р РЋРІР‚ВВВВВВВВРЎР‚
- Viber
- Skype
Specs
Reviews
Instructions ()
Нет файлов
Publications
Recommended products
Volcanite disc 150mm*40mm*32mm, 60grit
Designed for grinding steel parts. Used for grinding and polishing metals and minerals.
Vulcanite polishing wheel with rubber base with abrasive grit. The mineral is volcanite. The binder contains rubber. Because of this, vulcanite polishing wheels are also called rubber.
The diameter of the circle is 150mm, the width of the circle is 40mm. Landing hole 32mm. Gritness - 60.
1500p(0)
Отзывов: 1
Marking knife PETROGRAD, model N3, flexible, arrow form
Dovetail Marking knife N3 has flexible blade with arrow form. This knife is a carpentry tool for precision marking, it has one-sided sharpening. Blade of marking tool is made of high carbon steel and hardened. Best for marking dovetail joints. Arrow form give easy two side marking: forward and backwark.
Knife blade was sharpened and ready to work out of the box.
- high carbon steel ( like 60SG2A steel (Germany 66Mn4, Ck67, USA 1066))
- hardened to 59-61 HRc
- blade length - 40 mm
- blade width - 9 mm
- blade thickness - 0.73 mm
- sharpening angle - 30 degrees
- skew angle - 60 degrees
The handle of marking tool designed for comfortable pencil like grip, has ergonomic and not rolling shape. Handle is made of fine wood and coated with oil.
- handle length - 160mm
- handle made of sapele wood*
- oil coated
| Weight: | 0.15 kg |
|---|---|
| Type: | marking knife |
| Steel: | 9ХФ |
| Hardness: | 59-61 HRc |
| Handle material: | Ash* |
| Handle lenght: | 160 mm |
| Edge: | arrow |
| Sharpening: | one bevel |
| Blade lenght: | 40 mm |
| Total lenght: | 200 mm |
1400p(0)
Отзывов: 1
Outdoor axe PETROGRAD, model Chernigov IX
Outdoor axe. Total length - 440 mm. The length of the cutting edge 75 mm. The axe is forged by hand from 65G (Germany 66Mn4, Ck67, USA 1066) steel. Sharpening lens-shaped. Shock reinforced butt. Total weight - 0.9 kg. Includes leather case to protect the blade. The axe handle is made of maple wood. The axe is perfectly balanced and is suitable for cutting down, cutting off branches, driving wedges and other hiking needs. In Canada, supporters of rafting and canoeing called this axe - Canoe Axe. Totally hand made at PETROGRAD factory of joinery and carpentry tools.
Made in Russia
8500p(0)
Отзывов: 1
Slurry stone, PETROGRAD, 240grit, D80*32mm
Абразив для наведения суспензии, ПЕТРОГРАДЪ, D80*23мм. Предназначен для высвобождения абразива водных заточных камней. Выпускается в двух разновидностях. Производство фабрика Петроградъ (Россия).
870p(0)
Отзывов: 1
Popular goods
Sharpening set PETROGRAD N3, for knives, 3 stones
Sharpening set PETROGRAD N3.Water stones. Grain size: 150, 360, 500, 1000, 1500 and 2000. Size 15х15х120mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Used for sharpening and setting bevels.
High sharpening performance, second only to diamond, is ensured by the use of silicon carbide abrasive grains, which are notable for their sharpness and brittleness. The high hardness of carbide-silicon grinding materials allows you to confidently process not only carbon steels, but also hard alloys, which is impossible on stones made of electro-alumina powders. In addition to performance, it is worth noting the extraordinary tactile sensations when sharpening a tool. Stones quickly give a slurry and produce a very pleasant sound.
> Water stones PETROGRAD are distinguished by high performance and geometry in a state of delivery.
In the characteristic of a water stone are specified: the first letter - hardness (I, J - soft, K - average); Japanese grain size according to JIS R6001-1987 is 150 (80 microns), 360 (34 microns), 500 (24 microns), 1000 (12 microns), 2000 (6 microns) and C is silicon carbide.
| 150 | 360 | 500 | 1000 | 1500 | 2000 | |
| Sharpening set PETROGRAD N3 | + | + | + | |||
| Sharpening set PETROGRAD N4 | + | + | + | + | + | + |
Comparison of FEPA, JIS and GOST standards:
2900p
Отзывов: 1
Dead blow wooden mallet, round, 450 g
Dead blow wooden mallet* with round shape. Mallets made by woodturning from solid wood with filling of metal balls (lead shot). Filling act as a weighting agent, and also reduce recoil upon impact. Mallet weight 450 gramm. Mallets made of beech wood and covered with tung oil. Round mallets used for working with mortise chisels and woodcarving chisels. It used when cutting joints and when carving large elements or sculptures (work from under the mallet).
Production of Petrograd toolworks. Made in Saint Petersburg Russia.
| diameter: | 65 mm |
|---|---|
| weight: | 450 gramm |
| material: | beech wood |
| filling: | lead shot |
| coating: | thung oil** |
*blow without bounce
**coating may change from batch to batch
1480p
Отзывов: 1
Froe PETROGRAD, model Uglich 300мм
Froe is a special cleaving axe (cleaver) for green woodworking, bodging and spoon making. Long blade and perpendicularly handle make it easy to split wood along the grain. Thick blade back would be good to use with mallet or even log*. Froe axe also good for split logs for fireplace, stove or even for making wood shingles and wooden blanks for spoons.
- blade lenght - 265 mm
- blade thickness - 10 mm
- blade width - 60 mm
- blade steel - 65Г
- hand forged
- hardened to 59 HRc
- handle made of maple
- handle lenght - 480 mm
- weight - 1,5kg
Edge is lenticular sharpened. Froe "Uglich" by petrograd toolworks is perfect choice for making blanks for spoon making. Froe axe is hand forged and totally made in Saint-Petersburg Russia
| Weight: | 1.5 kg |
|---|---|
| Type: | Splitting axe |
| Steel: | ШХ15 |
| Handle material: | Maple* |
| Edge: | Straight |
| Edge width: | 60 mm |
| Blade lenght: | 265 mm |
| Handle lenght: | 480 mm |
*Not for use with steel percussion tools such as a hammer or sledgehammer. It is allowed to work with wooden and brass hammers or mallets.
**material of handles may changes from batch to batch.
9600p
Отзывов: 1
Strop PETROGRAD, model 2, for carving tools, 200mm*70mm
The bar with glued leather is designed for finishing semi-circular chisels, drawknives, etc. One of the flat sides can also be used for fine-tuning of flat tools. The size of the bar is 200x70 mm. Min radius - 6.5mm, max. radius - 12mm. It can be used with polishing pastes. Material - ash, leather - reversal 2mm. Leather color may differ from the image on the site. Made in Russia.
1450p
Отзывов: 1
Checkering tool complete N2-20, 60°
Checkering tool No2. Both sides with teeth. Used for the application of grooves and their deepening after application. One blade runs along the guideline, while the other marks the next groove. When moving to the next groove, the tool deepens it and again applies the next groove. Cutter 2 It is a combination of tools for expanding and deepening grooves. Beech handle. All the cutters are made of steel, underwent a process of hardening and processing, for long and reliable work.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
| Item code | Item | Cutting angle |
Teeth per inch |
| М00015687 | N2-16 | 60° | 16 |
| М00015638 | N2-16 | 90° | 16 |
| М00015688 | N2-18 | 60° | 18 |
| М00015669 | N2-18 | 90° | 18 |
| М00015689 | N2-20 | 60° | 20 |
| М00015662 | N2-20 | 90° | 20 |
| М00015690 | N2-22 | 60° | 22 |
| М00015637 | N2-22 | 90° | 22 |
| М00015691 | N2-24 | 60° | 24 |
| М00015676 | N2-24 | 90° | 24 |
850p
Отзывов: 1
Parquet mallet PETROGRAD, ring type, blue
Киянка для укладки паркета, ПЕТРОГРАДЪ, модель 2, синяя. Форма киянки предложена известным паркетным мастеров Ринатом Камаловым. С помощью такого инструмента происходит монтаж паркетного покрытия. Производство фабрика Петроградъ (Россия).
9510p
Отзывов: 1
Масло камелии, KAPLEUM, Сандал, 60 мл.
Масло камелии, KAPLEUM, Сандал, 60 мл. Неформальная творческая группа GILDIA.PRO предлагает новый продукт, изготовленный на основе отлично зарекомендовавшего себя масла Камелии – KAPLEUM.
600p
Отзывов: 1
Set of PETROGRAD mini-chisels, 6 items, in wooden box
Набор мини-стамесок ПЕТРОГРАДЪ, 6 штук, от 0.7 до 3.0 мм, в деревянном боксе. Предназначены для моделизма. Инструменты выполнены в миниатюрном размере и имеют острые лезвия для тонкой и аккуратной работы. Производство Россия.
9200p
Отзывов: 1
PETROGRAD carving knife designed by Igor Frolov for working in `Single knife carving technique` 100
Резаки ПЕТРОГРАДЪ, для работы в "технике одного резца" Игоря Фролова – это резчицкий инструмент, созданный по эскизам Игоря Фролова. Применяются для резьбы по дереву, выполнены из инструментальной стали и закалены до 61 HRc. Производство – фабрика Петроградъ (Россия).
2500p
Отзывов: 1
Straight Gouge Rubankov, N5, 20mm, 100mm
Стамески для резьбы по дереву, ПЕТРОГРАДЪ, прямые N5 – это резчицкий инструмент профессионального уровня, предназначенный для резьбы по твердым и мягким породам древесины. Основа любого комплекта резчицкого инструмента – это прямые стамески. Прямые стамески подходит для множества задач от создания фигурных форм до подбора фона. Их можно использовать со скосом вниз или вверх для создания вогнутых или выпуклых поверхностей. Производство – фабрика Петроградъ (Россия).
4300p
Отзывов: 1