Share / Save Link:

Cutting knife PETROGRAD, Roman type, 160mm, right bevel



Rating :
(1)
Shipping: worldwide

2000 p (30.76) out of stock

Description

Handicraft knife PETROGRAD, Roman type, 160mm, right edge. Right knife. Made of tool steel 58-61HRC. The knife is designed for working with leather. Can be used both for curly cuts and for straight trimming of leather. Full length 160 mm. Width 57 mm. Thickness 3 mm.
Knives have several uses:
- cutting and roughing leather
- in conjunction with a ruler can be used to cut strips
- well cuts thick skin
 
Factory production Petrograd
Made in Russia

Share / Save Link:

Videos

youtube video

Specs

Reviews

Instructions ()

Нет файлов

Publications

Recommended products

Magazine Master&Workshop 2020 № 2 (9)

Журнал Мастер и мастерская 2020 2 (9)

500p(30.76)
Отзывов: 1
>Рейтинг:
new

Sharpening set PETROGRAD N6, for woodworking tools, 3 stones

Набор заточной ПЕТРОГРАДЪ N6, для столярных инструментов, 3 камня (рекомендован Ф.А.Бондаревым). Зернистость: 800, 4000 и 6000. Размер 200х70х20мм. Абразивное зерно - карбид кремния. Связка - керамика. Твёрдость I обеспечивает минимальный износ камня при работе. При заточке не перегревается сталь. Не требует использования масла. Перед использованием замочить в воде на 2-10 мин. Используются для заточки и задания скосов.  Абразивный камень Петроградъ Бриз #4000, водный камень на основе кварцевого зерна 3мкм. на керамической связке, имеющий в маркировке указание зернистости по Jis.
Камни 3000 и 6000грит производятся в  Япония, по заказу фабрики ПЕТРОГРАД. Ориентированы под наши размеры.

С марта 2016 года для брусков, выпускаемых под торговой маркой " Петроградъ" будет применяться новая маркировка характеристики.
Формат кода характеристики: "Материал"_"Зернистость"_"Связка"_"Твёрдость"

8220p(30.76)
Отзывов: 1
>Рейтинг:

Non slip mat for sharpening

Коврик для заточки инструмента, 250мм*100мм. Используется для работы с заточными абразивными камнями. Препятствует скольжению абразивных камней по рабочему столу тем самым обеспечивает комфортную работу. Изготовлен из высококачественного силикона толщиной 0,5мм. Легко отмывается от шлама. Предохраняет рабочий стол от царапин и повреждений.

Сделано в России

400p(30.76)
Отзывов: 1
>Рейтинг:

Polishing Paste 2000 grit 180 g

Polishing paste, 2000grit, green, 180g. Waxy polishing pastes in the form of a rectangular bar. Dimensions - 60x60x15mm. Granularity - coarse, medium and fine. Green 2000grit. Weight - 180g. Used for grinding and polishing on wheels, belts, etc. Perfect for hand-held leather bars Petrograd.

Composition: a mixture of grinding powders, binders and auxiliary elements - kerosene, stearin, sodium bicarbonate, silica gel.

Made in Russia.

600p(30.76)
Отзывов: 1
>Рейтинг:

Carving knife PETROGRAD, Bogorodsky type, 170mm/40mm

Carving knives for general use, as well as for large material removal. Blade length 40mm or 60mm, rounded butt. A comfortable oval redwood handle is saturated with oil and covered with shellac. The length of the handle - 115mm. Excellent knife for both beginners and professionals. The 2.5 mm thick blade is made of high carbon steel hardened to 59-61 HRc. All the knives are sharpened and ready to go. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
 
1200p
Отзывов: 1
Рейтинг:

Mallet PETROGRAD, round, D65mm*250mm, 300 g

Wooden mallet, round shape. Solid wood mallets made by woodturning. Mallet weight 300 gramm. Mallets made of beech wood and covered with tung oil. Round mallets used for working with mortise chisels and woodcarving chisels. It used when cutting joints and when carving large elements or sculptures (work from under the mallet).
700p
Отзывов: 1
Рейтинг:

Adze PETROGRAD, half round N3

Adze N3 was created on the basis of samples of adzes from Sweden and Norway, whose house-building traditions have the same deep roots as in Russia

Forged tempered to hardness - 58-60HRc. The adze is made of spring steel 65 g (Germany 66Mn4, Ck67, USA 1066). The width of the blade is 75 mm. Overall length - 650 mm. Weight - 1.6 kg.

Totally hand made at PETROGRAD factory of joinery and carpentry tools.

Made in Russia.

9700p
Отзывов: 1
Рейтинг:

Checkering layout guide / butt scribe

Checkering layout guide is necessary for confident marking of lines under the notch, for drawing notches parallel to the upper line of the forearm, for accurate drawing and repeatability of the notch pattern on both sides of the bed, for marking the edge of the guide lines with the original pattern.

Checkering layout guide is regulated along the entire length of the installation of both the upper and lower notch lines, and the length of the fixed handle is sufficient to reach the other side even through the widest trunk.

Working length of a rod is 77 mm.
Knife projection from 6.5 mm to 48.5 mm

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

600p
Отзывов: 1
Рейтинг:

Checkering tool complete B-1

Checkering too B-1, is a 2 conical cutter with a working angle of 90 degrees, separated by a wide groove with teeth. A tool for making the roller around the notch. Pay attention to the high relief, providing fast and smooth cutting. The tines provide good removal of all hardwoods.

A cutter is just the same as cutting deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Smoothly each groove is obtained.

Maximum roller height 1 mm, width 2.5 mm
Made in Russia.

1000p
Отзывов: 1
Рейтинг:

Checkering tool complete C-1, 60°

Checkering tool C-1 has 1 pyramidal tooth. Angle top 60 degrees. All the cutters are made of steel, undergone the process of hardening and processing, for long and reliable work.
It is V-shaped with teeth on both sides. Checkering tool C-1 is designed for applying the original layout of the picture, as well as for deepening the grooves after their application, with other cutters.
The wooden handle is made of beech, well balanced and lies comfortably in your hand.
Pay attention to the high relief, providing fast and smooth cutting. The tines provide good removal of all hardwoods.
The cutter doesnt look like cutting - deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Equal each element is obtained.

The width of the working part is 5 mm, the length of the working part is 11 mm, the apex angle 60 degrees.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

1000p
Отзывов: 1
Рейтинг:

Bench Chisel, PETROGRAD, model Istra short, 25mm

Forged carpentry short chisels Istra with a straight cutting edge and a wooden handle, has designed for hard work. The basis for the manufacture of chisels Istra was taken the form of old Russian chisels from the old tools museum Rubankov, and also takes into account long-term experience in the development of professional carpentry and carpentry tools of other toolworks.

Carpentry chisels Istra are totally hand made at PETROGRAD toolworks of joinery and carpentry tools. Made in Saint-Petersburg Russia.

6000p
Отзывов: 1
Рейтинг:

Bench Chisel, PETROGRAD, model Istra short, 38mm

Forged carpentry short chisels Istra with a straight cutting edge and a wooden handle, has designed for hard work. The basis for the manufacture of chisels Istra was taken the form of old Russian chisels from the old tools museum Rubankov, and also takes into account long-term experience in the development of professional carpentry and carpentry tools of other toolworks.

Carpentry chisels Istra are totally hand made at PETROGRAD toolworks of joinery and carpentry tools. Made in Saint-Petersburg Russia.

6500p
Отзывов: 1
Рейтинг:

Bench Chisel, PETROGRAD, model Istra short, 50mm

Forged carpentry short chisels Istra with a straight cutting edge and a wooden handle, has designed for hard work. The basis for the manufacture of chisels Istra was taken the form of old Russian chisels from the old tools museum Rubankov, and also takes into account long-term experience in the development of professional carpentry and carpentry tools of other toolworks.

The blade has forged manually from steel ШХ15 (USA analog is 52100, G52986, J19965; Germany  analog of 1.3505, 100Cr6, 102Cr6) and hardened to 58-61 HRC. Carpentry chisels are intended for timber framing for processing deep grooves in logs and timber as an indispensable tool for the construction of frame structures in the style of timber frame, post-and-beam half-timbered, fachwerkhaus, Log house.

  • Chisel blade fastened to the handle with a conical socket.
  • The thickness of the blade at the neck is 11 mm, the thickness in the area of the descent is 7 mm.
  • The handles are made of ash and crimped with a stainless ring to harden the butt when working with a mallet or hammer.
  • Available in widths of 19 mm, 25 mm, 38 mm, 40 mm and 50 mm ( see full catalogue).
  • Blade length 300 mm, full length 410 mm.
  • The wedge-shaped blade prevents jamming in the wood.

Carpentry chisels Istra are totally hand made at PETROGRAD toolworks of joinery and carpentry tools. Made in Saint-Petersburg Russia.

7000p
Отзывов: 1
Рейтинг:

Sash Framing Chisel, PETROGRAD, model Istra, 38mm

Forged carpentry chisels Istra with a straight cutting edge and a wooden handle, has designed for hard work. The basis for the manufacture of chisels Istra was taken the form of old Russian chisels from the old tools museum Rubankov, and also takes into account long-term experience in the development of professional carpentry and carpentry tools of other toolworks.

Carpentry chisels Istra are totally hand made at PETROGRAD toolworks of joinery and carpentry tools. Made in Saint-Petersburg Russia.

7600p
Отзывов: 1
Рейтинг: