Straight Gouge Rubankov, N2, 14mm



2600 p (36.09) out of stock
Rating :
Avg. value 5 (by rates of 1 users)

Description

Straight Gouge Rubankov, N2, 15mm (0.59 inches)

Carving chisel "Rubankov" Straight Gouge N2, 14mm (0.59 inches). This is universal chisel that perfectly suits for carving hard and soft wood. The width of the cutting edge is 15mm ( 0.59 inches ). The total lenght of the gouge is 280mm (11.02inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 135mm (5.31inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.

Gouge is sharpened, honed and fully ready to work out of the box.
This model is for hand cutting and can be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )


Share / Save Link:

Specs

Reviews

Instructions ()

Нет файлов

Publications

Recommended products

Журнал Мастер и мастерская 2020 2 (9)

300p(36.09) In stock

Flat M-shaped drawknife is designed for woodworking, wood carving, as well as for carpentry. Ideal for making Windsor chairs. Handles in the same plane as the blade allow easy control of the instrument, and their direction at an angle to the cutting edge allows for less stress on the wrists. The 3.5mm thick blade has a curved cutting edge, made of carbon steel 65G (Germany 66Mn4, Ck67, USA 1066) and hardened to 57-59 HRC. This form of the cutting edge allows you to smoothly enter the material and control the cutting force. Handles 100mm long made of maple, impregnated with oil and reinforced with a brass ring. Blade length - 135 mm, width 20 mm. Sharpening angle - 30grad. Includes leather case to protect the blade. Totally hand made at PETROGRAD factory of joinery and carpentry tools.

Made in Russia.

3 000p(36.09) In stock

Брусок ПЕТРОГРАДЪ, для полирования, цилиндр D25мм*100мм, общая длина 180мм. Круглый брусок с наклеенной кожей предназначен для доводки полукруглых резчицких стамесок, скобелей и пр. Может использоваться с полировальными пастами.  Материал - ясень, кожа - "выворотка", гладкая, толщина 2 мм. Цвет кожи может отличаться от изображения на сайте. 

Производство - Россия

730p(36.09) In stock

Waxy polishing pastes in the form of a rectangular bar. Dimensions - 60x60x15mm. Granularity - coarse, medium and fine. Brown 1200grit Weight - 180g. Used for grinding and polishing on wheels, belts, etc. Perfect for hand-held leather bars Petrograd.

Ingredients: a mixture of grinding powders, binders and auxiliary elements kerosene, stearin, sodium bicarbonate, silica gel.

Made in Russia.

500p(36.09) In stock

Spoon knife (shallow hook knife).
Used to made a wooden spoons, as well as for other similar works.
The blade width is 8mm, the inner radius of the ring is 15mm. The outer side of the ring has a convex lens-like shape and is polished, which, together with the small width of the blade, allows you to cleanly and smoothly cut wood without scoring and steps.
The total length of the knife is 175 mm; the length of the handle is 130 mm.
Made of  9ХС (150Cr14, 90CrSi, 90CrSi5) steel, hardened to 58-60HRC.The convenient ergonomic oval handle of the knife is made of maple and impregnated with oil.
All knives are sharpened, finished and fully ready for work.
The right-handed version is designed to work with the right hand towards itself, the left-handed version - with the left hand towards itself.
Totally hand made at PETROGRAD factory of joinery and carpentry tools.
Made in Russia

2 100p

Set of bench chisels PETROGRAD. The length of the blade - from 120mm to 160mm; width - 6mm, 12mm, 20mm, 26mm. Overall length - from 250mm to 295mm.These chisels have a classic design with blades that are bevel-edged to a narrow land on each side, providing excellent clearance when trimming into an angled corner such as in dovetail work, as well as reducing sidewall friction when working in a tight recess. Chisels are made focusing on the experience of old masters of woodworking. The blade is made of high-alloyed chrome-manganese steel and hardened to 60HRc. Comfortable hornbeam handle. The handle at the junction with the blade reinforced brass ring with leather gasket. 

5 550p

Set of bench chisels PETROGRAD. The length of the blade - from 120mm to 160mm; width - 6mm, 8mm, 10mm,12mm, 16mm, 20mm, 26mm, 32mm, 40mm, 50mm. Overall length - from 250mm to 295mm.These chisels have a classic design with blades that are bevel-edged to a narrow land on each side, providing excellent clearance when trimming into an angled corner such as in dovetail work, as well as reducing sidewall friction when working in a tight recess. Chisels are made focusing on the experience of old masters of woodworking. The blade is made of high-alloyed chrome-manganese steel and hardened to 60HRc. Comfortable hornbeam handle. The handle at the junction with the blade reinforced brass ring with leather gasket. 

14 970p

Carving knives for general use, as well as for large material removal. Blade length 40mm or 60mm, rounded butt. A comfortable oval redwood handle is saturated with oil and covered with shellac. The length of the handle - 115mm. Excellent knife for both beginners and professionals. The 2.5 mm thick blade is made of high carbon steel hardened to 59-61 HRc. All the knives are sharpened and ready to go. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
 
900p

Water stones. Grain size: 150, 360, 500, 1000, 1500 and 2000. Size 15х15х120mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Made in Russia.

To select and order an abrasive stone of desired grain size, click on the name of the product.

340p

Adze N2 created on the basis of a study of ancient tools, made in the northern regions of Russia and now stored in our Museum of Ancient Instruments.

Forged tempered to hardness - 58-60HRc. The adze is made of spring steel 65 g (Germany 66Mn4, Ck67, USA 1066). The width of the blade is 70 mm. Total length - 500 mm. Weight - 1.3 kg.

Totally hand made at PETROGRAD factory of joinery and carpentry tools.

Made in Russia

8 600p

Checkering layout guide is necessary for confident marking of lines under the notch, for drawing notches parallel to the upper line of the forearm, for accurate drawing and repeatability of the notch pattern on both sides of the bed, for marking the edge of the guide lines with the original pattern.

Checkering layout guide is regulated along the entire length of the installation of both the upper and lower notch lines, and the length of the fixed handle is sufficient to reach the other side even through the widest trunk.

Working length of a rod is 77 mm.
Knife projection from 6.5 mm to 48.5 mm

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

600p

Water stones. Grain size: 150, 360, 500, 1000, 1500, 2000 and 4000 grit. Size 200*70*20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Made in Russia.

 

2 910p

Clamp for quick fixing of workpieces. The clamp is hand forged. To use it, insert it into one of the holes for the stops in the workbench tabletop and press down the workpiece. Depth and height of workpiece clamping 120 mm. The diameter of the clamping rod is 17 mm. The size of the clamp is 290 x 200 mm. Material - steel.

Production - factory of joinery and carpentry tools PETROGRAD.
Made in Russia

2 500p
new

Protractor PETROGRAD, round, for checking the angles of sharpening of tools. 12 cutouts for angles - 15 °, 17.5 °, 20 °, 22.5 °, 25 °, 27.5, 30 °, 32.5 °, 35 °, 40 °, 60 °, 118 °. The depth of the cutouts is 19mm. Template diameter - 50mm. This template complements the PETROGRAD rectangular protractor. The convenient and compact template is used to check angles when sharpening chisels, cutters, planer knives and other cutting tools. There are holes at the end of the cutouts, which allows you to use a template to determine intermediate values ​​from the values ​​available in the set and not spoil the RC. Made of brass.

Production - factory of joinery and carpentry tools PETROGRAD.
Made in Russia.

1 000p