Checkering tool complete N3-22, 60°

Double-sided bar with glued leather. The size of the bar is 200x70x25mm. It can be used with polishing pastes. Material - ash, leather - "reversal" 2mm. Skin color may differ from the image on the site. Made in Russia.

The bar with glued leather is designed for finishing semi-circular chisels, drawknives, etc. One of the flat sides can also be used for fine-tuning of flat tools. The size of the bar is 150x30 mm. Min radius - 3 mm, max. radius -6 mm. It can be used with polishing pastes. Material - ash, leather - reversal 2mm. Leather color may differ from the image on the site. Made in Russia.

Checkering too B-2, is a 2 conical cutter with a working angle of 90 degrees, separated by a wide groove with teeth. A tool for making the roller around the notch. Pay attention to the high relief, providing fast and smooth cutting. The tines provide good removal of all hardwoods.

A cutter is just the same as cutting deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Smoothly each groove is obtained.

Maximum roller height 1 mm, width 2.5 mm
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

Leather tool roll PETROGRAD. The bag is made of a brown split is designed for storing and carrying carving and bench chisels with a handle diameter of not more than 35 mm and a total length of not more than 260 mm. The bag is equipped with ties for fixing the bag in a twisted state. Width 320 mm, total length in unfolded state 520 mm. The location of the pockets is two-sided. We recommend placing chisels in a bag with protective caps put on cutting edges.

The manufacturer reserves the right to make changes in the design of the bag that do not lead to deterioration of its qualities.

Made in Russia.

Шаблон угломер ПЕТРОГРАДЪ. 13 вырезов под углы - 15°, 20°,22.5° 25°, 27.5°, 30°, 32.5°, 35°, 37.5°, 40°, 45°, 90°, 120° глубина вырезов - 9 мм. Ширина шаблона - 54 мм, Длина шаблона 85 мм. На конце вырезов имеется отверстие, что позволяет использовать шаблон для определения других углов проводя интерполяцию (н-р угол 24° или 26°, используя вырез на 25°). Выполнен из латуни. Удобный и компактный шаблон используется для проверки углов при заточке стамесок, резцов, ножей рубанков и тп.
Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ.

Сделано в России.

Waxy polishing pastes in the form of a rectangular bar. Dimensions - 60x60x15mm. Granularity - coarse, medium and fine. Brown 1200grit Weight - 180g. Used for grinding and polishing on wheels, belts, etc. Perfect for hand-held leather bars Petrograd.

Ingredients: a mixture of grinding powders, binders and auxiliary elements kerosene, stearin, sodium bicarbonate, silica gel.

Made in Russia.

Checkering tools from T-series has three cutting parts. All the cutters are made of steel, underwent a process of hardening and processing, for long and reliable work. The beech handle is well balanced and easy to use.

At the same time cut all three blades with equally spaced teeth, so you can quickly apply the pattern immediately to a large area. This speeds up the process of drawing the picture, eliminates the additional effort. The lines are parallel with a single pass.

The cutter has not matter what cutting - deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Smooth turns every groove.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

Abrasive water stones. Grit: 120, 150, 360, 500, 800, 1000,1500, 2000 and 4000 grit. Size 200x70x20mm. The abrasive grain is silicon carbide. Bond - ceramics. Hardness I ensures minimal wear of the stone during work. Steel does not overheat when sharpening. Does not require oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Manufactured in Russia.

Checkering Set N1 (90 degrees, 16 lines) includes 6 tools for making checkers on wood. Set of gouges with 90 degree cutters, this type is making more sharp pointed checkers that grants stronger grip.

Set number 1 includes:

• gouge B-2 ( two cutting edges, spacer with tooths )
• gouge S-1 90° ( one cutting edge )
• gouge N2-16, 90° ( two cutting edges )
• gouge N3-16, 90° ( right router, left cutting edges )
• gouge N4-16, 90° ( left router, right cutting edges )
• gouge C-1, 90° ( one cutting edge )
• Checkering gauge
• roll bag for carving tools ( 6 pockets )

Инструмент представлен линейкой штихелей с расширяющимся клинком с шириной рабочей части 27 мм, 38 мм, 43 мм. Имеют широкий спектр применения при резьбе, является одним из основных ножей в геометрической резьбе, а также удобен и востребован в технике резьбы Whittling. Штихели выполнены из стали 9ХФ и имеют рукояти из клёна, покрытые тунговым маслом. угол заточки - 20 градусов, толщина клинка - 2 мм.
Сделано в России.

Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ