Share / Save Link:

Checkering tool complete R-11, 90°



Rating : (1)
Shipping: worldwide

850 p (13.07)

Description

Checkering tools from R-series have two sides: the right side with teeth, the left side - smooth, used as a guide. The gap between the tool tips is equal to the pitch. All the cutters are made of steel, underwent a process of hardening and processing, for long and reliable work. The left blade is devoid of teeth, has a sharp and smooth shape, and exactly follows along the guide line. The right blade has teeth and cuts a new groove during the process of notching from left to right. At the same time between the previous line and the new remains empty space - the line width in the usual row. Thus, it is possible to alternate sections with a notch and neat smooth lines of the same width. Such a notch principle is often called "French" or "Scottish." Beech handle.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.


Share / Save Link:

Видеоматериалы

youtube video

Specs

Reviews

Instructions ()

Нет файлов

Publications

Recommended products

Checkering gauge

Checkering gauge for markup. Allows you to accurately measure the number of checkering lines on ready products, and mark a new pattern on blanks for checkering.

  • measures the number of lines
  • measures the shape and angle of diamonds

The corners of the template allow you to measure the shape and size of the diamond in the pattern (checkers ratio).

  • edges of the diamond 3 to 1
  • edges of the diamond 3.5 to 1

The edges of the template are engraved with the number of checker lines per inch.

  • 16, 18, 20, 22 lines per inch (side 1)
  • 24, 26, 28, 32 lines per inch (side 2)

Checkering template is an indispensable assistant for work. The gauge is made of hard plastic with engraving and color spraying.
Production of the Petrograd toolworks.

Lines measurement: 8 sizes
Checkers ratio: 2
Material: Hard plastic
Lenght: 235 mm
Width: 70 mm
Weight: 0.012 kg
700p(13.07)
Отзывов: 1
>Рейтинг:
%

Magazine Master&Workshop 2020 № 2 (9)

Журнал Мастер и мастерская 2020 2 (9)

500p(13.07)
Отзывов: 1
>Рейтинг:

Carving axe PETROGRAD, model Zvenigorod 7, handle n5

Wood carving axe Zvenigorod VII . This axe is made for artistic processing of wood, such as carving sculptures, bowl carving, dish carving and other stuff.

  • Blade width 120 mm
  • Sharpening angle - 25 degrees
  • Hardness - 55-58HRc
  • Handle lenght - 350 mm
  • Full weight - 07 kg

Carving axe Zvenigorod VII is quite small and easy to control. It's weight is about 650g, makes it maneuverable and allows you to work more accurate and precise.

The shape of the axe head was designed for carving operations where palm is resting extreamly close to axe head or even on the axe head. This design helps to exelent control of the axe even during long carving sessions. Grip above the head is used for trimming, stripping. This axe model was based on samples from museum "Rubankov" and finalized taking into account the wishes of wood carvers.

The axe head is hand forged from steel 65Г (spring steel) and hardened to 55 - 58 HRc at the cutting edge and along the entire beard, the rest part is normalized to HB280. This hardening allows you to hit the poll without the risk of creating a cracks in the metal.
Head has mounted to handle on 3 wedges, one along the head eye and two in cross section.

Cutting edge is razor sharp and ready to work out of the box. Sharpening angle - 30 degrees.

Axe handle is made of maple* and coated with Danish oil**. The hatchet handle has a longitudinal bend. In cross-section the handle has the shape of an egg, which is very convenient for good grip while carving. Handle has a hole for hanging.

Woodcarving axe Zvenigorod VII are product of Petrograd toolworks and supplied in a leather case for protection of the cutting edge and easy storage. Made in Saint-Petersburg Russia.

11200p
Отзывов: 1
Рейтинг:

Sharpening stone PETROGRAD, 200*70*20mm, 360 grit

Abrasive water stones. Grit: 150, 360, 500, 800, 1000,1500, 2000 and 4000 grit. Size 200x70x20mm. The abrasive grain is silicon carbide. Bond - ceramics. Hardness I ensures minimal wear of the stone during work. Steel does not overheat when sharpening. Does not require oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Manufactured in Russia.

1700p
Отзывов: 1
Рейтинг:

Sharpening stone PETROGRAD, 200*70*20mm, 120 grit

Abrasive water stones. Grit: 120, 150, 360, 500, 800, 1000,1500, 2000 and 4000 grit. Size 200x70x20mm. The abrasive grain is silicon carbide. Bond - ceramics. Hardness I ensures minimal wear of the stone during work. Steel does not overheat when sharpening. Does not require oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Manufactured in Russia.

2120p
Отзывов: 1
Рейтинг:

Axe Anika, model Tomohawk

Топор Аника, Томагавк, с чехлом. Ультра-легкий топор Томагавк с обухом-молотком. Идеальный инструмент для передвижений налегке и хозяйственной деятельности в лесу. Заточка с микроподводом для работ по сухой и сырой древесине. Вес головы — около 600 грамм. Вес топора — около 800 грамм. Общая длина — 400-450 мм.
9600p
Отзывов: 1
Рейтинг:
new

Vologda Knife, type 1

Нож рабочий ПЕТРОГРАДЪ, серия Вологда, модель N1 – это нож для резьбы по дереву, используемый в том числе при создании деревянных ложек. Производство фабрика Петроградъ (Россия).

3200p
Отзывов: 1
Рейтинг:
new

Set of PETROGRAD chisels, Volga type, 4 items in roll (8, 12, 20, 23mm)

Набор стамесок ПЕТРОГРАДЪ, серия Волга, 4 штуки (8, 12, 20, 32), в сумке-скрутке. Данный набор собран специально таким образом, чтобы с его помощью вы смогли выполнить максимально широкий спектр задач. В набор были помещены самые востребованные размеры стамесок (8, 12, 20, 32) мм. Производство фабрика Петроградъ (Россия).

14900p
Отзывов: 1
Рейтинг:
new

PETROGRAD axe, model Bryansk, handle n9

Топор походный ПЕТРОГРАДЪ, модель Брянск, топорище н9. Предназначен для выполнения бытовых задач: колка дров, подтес колышков и небольших бревен, а также многих других задач. Выкован вручную из стали 65Г, закален до 58-59 HRc. Производство фабрика Петроградъ (Россия).

 

10700p
Отзывов: 1
Рейтинг:
new

Книга "Зодчие Русского Севера"

Миссия книги – изучение и популяризация истории Русского Севера, воплощённой в культурном ландшафте, неотъемлемой частью которого является уникальное деревянное зодчество. Представлены новые исторические и этнографические иллюстрации, памятники деревянной архитектуры, обмеры, которые ранее не были опубликованы. Некоторые из сооружений утрачены и известны лишь по рисункам и фотографиям, многие сохранились и сняты в 2023 г. специально для книги. Это памятники Архангельской, Ленинградской, Мурманской областей и Карелии. Создатели книги хотят привлечь внимание к ветшающим деревянным памятникам, которые еще могут быть спасены – законсервированы и отреставрированы.
3400p
Отзывов: 1
Рейтинг: