Carving chisel, PETROGRAD, V-type, 90 degrees



1050 p (14.57)
Rating :
Avg. value 0 (by rates of 0 users)

Description

 Carving chisel, PETROGRAD, V-type, 60 degrees. It is intended for carving of medium-sized parts and small-scale detailing, it can also be used as a marking tool for “Checking” (notch on the butts). Made in 65G (Germany 66Mn4, Ck67, USA 1066) forged steel. The handle is barrel-shaped, which allows you to securely and conveniently hold the chisel without tiring the wrist. Handle material - beech. Coating oil wax. The length of the handle - 140 mm, full length - 175 mm, width - 7 mm

Chisels are designed for both amateurs and professionals engaged in medium-sized products.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.


l

Share / Save Link:

Specs

Reviews

Instructions ()

Нет файлов

Publications

Recommended products

new

Журнал Мастер и мастерская 2020 2 (9)

300p(14.57) In stock

Воскообразные полировальные пасты в виде прямоугольного бруска. Размеры - 60x60x15мм. Зернистость - крупная. Белая - 600грит. Масса - 180г. Используется для шлифовки и полировки на кругах, ремнях и т. п. Отлично подходят для ручных кожаных брусков Петроградъ.

Сделано в России.

400p(14.57) In stock
%

Односторонний брусок с наклеенной кожей.Размер бруска - 150х30х13 мм. Может использоваться как с полировальными пастами так и без них.  Материал - ясень, кожа - гладкая - 2 мм. Цвет кожи может отличатся от изображения на сайте. Производство - Россия

400p(14.57) In stock 540 p

Набор заточной ПЕТРОГРАДЪ N6, для столярных инструментов, 3 камня (рекомендован Ф.А.Бондаревым). Зернистость: 800, 4000 и 6000. Размер 200х70х20мм. Абразивное зерно - карбид кремния. Связка - керамика. Твёрдость I обеспечивает минимальный износ камня при работе. При заточке не перегревается сталь. Не требует использования масла. Перед использованием замочить в воде на 2-10 мин. Используются для заточки и задания скосов.  Абразивный камень Петроградъ Бриз #4000, водный камень на основе кварцевого зерна 3мкм. на керамической связке, имеющий в маркировке указание зернистости по Jis.
Камни 3000 и 6000грит производятся в  Япония, по заказу фабрики ПЕТРОГРАД. Ориентированы под наши размеры.

С марта 2016 года для брусков, выпускаемых под торговой маркой " Петроградъ" будет применяться новая маркировка характеристики.
Формат кода характеристики: "Материал"_"Зернистость"_"Связка"_"Твёрдость"

6 900p(14.57) In stock

Tool roll. Size - 370x330mm, 16 pockets. It is intended for storage of tools: cutters, chisels, knives. The maximum tool length is 300mm. Made of thick fabric - Furniture FLOCK, stitched seams.

700p

Carving knives with a straight butt and a curved cutting edge are great for strength work. Blade length 45mm or 60mm. The length of the handle - 115mm. The 2.5 mm thick blade is made of high carbon steel hardened to 59-61 HRc. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
 
900p

Water stones. Grain size: 150, 360, 500, 1000, 1500 and 2000. Size 15х15х120mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Made in Russia.

To select and order an abrasive stone of desired grain size, click on the name of the product.

 

1 290p

Water stones. Grain size: 150, 360, 500, 1000, 1500 and 2000. Size 15х15х120mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Production - made in Russia.

To select and order an abrasive stone of desired grain size, click on the name of the product.

2 380p

Резчицкий топор Звенигород VII предназначен для художественной обработки дерева, создания скульптур и других работ. Масса топора около 650г, что делает его маневренным и позволяет работать более деликатно и точно. Форма головы и обуха не случайны. Во время работы иногда возникает необходимость взять топор, уперев обух в ладонь, а шейка топора располагается между указательным и средним пальцем. Данный хват используется при подрезке, зачистке. Эта модель топора разработана с учётом пожеланий многих мастеров и опираясь на музейные образцы.
Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ.
Сделано в России.
8 000p
new

Checkering too B-1, is a 2 conical cutter with a working angle of 90 degrees, separated by a wide groove with teeth. A tool for making the roller around the notch. Pay attention to the high relief, providing fast and smooth cutting. The tines provide good removal of all hardwoods.

A cutter is just the same as cutting deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Smoothly each groove is obtained.

Maximum roller height 1 mm, width 2.5 mm
Made in Russia.

950p
new

Checkering tool C-1 has 1 pyramidal tooth. Angle top 90 degrees. All the cutters are made of steel, undergone the process of hardening and processing, for long and reliable work.
It is V-shaped with teeth on both sides. Checkering tool C-1 is designed for applying the original layout of the picture, as well as for deepening the grooves after their application, with other cutters.
The wooden handle is made of beech, well balanced and lies comfortably in your hand.
Pay attention to the high relief, providing fast and smooth cutting. The tines provide good removal of all hardwoods.
The cutter doesnt look like cutting - deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Equal each element is obtained.

The width of the working part is 5 mm, the length of the working part is 11 mm, the apex angle 90 degrees.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

950p
new

Checkering tools from series N3, have two sides: the right side is smooth, used as a guide, the left - with teeth. All the cutters are made of steel, underwent a process of hardening and processing, for long and reliable work. The right blade is devoid of teeth, has a sharp and smooth shape, and exactly follows along the guide line. The left blade has teeth and cuts a new groove during the process of notching from right to left. Thus, it is possible to apply a notch, using the previous groove, as a guide. Beech handle. 

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

950p

The fundamental book on the treatment of wood for professionals and amateurs, which was the basic textbook on woodworking, the entire first half of the twentieth century. Moscow 1901 / Reprint edition of St. Petersburg 2016. Format 145x215 mm, hard fabric binding, 680 pages, 755 illustrations. Also available is a set of drawings attached to the 1901 edition. The author is M. A. Netyksa, a member of the Scientific Department of the Society for the Distribution of Technical Knowledge.

Table of contents.
Division I.
Chapter I. The wood, its structure and properties ... The age of the twood ... The color of the wood ... The density of the wood ...
Chapter II Cutting wood into boards ... Machine sawing boards ... Diseases, defects and structural features of wood ...
Chapter III Various wood species ...
Chapter IV Chemical painting of wood ... Coloring methods and preparation of dye solutions ...
Division II.
Chapter I. The workbench and some adaptations to it ...
Saws and sawing ...
Chapter II Measuring, marking and testing instruments ... Compasses ...
Chapter III Cleaving, curing, cutting and planing ... Planes and planing ...
Chapter IV Rasps and filings ...
Chapter V. Drills and drilling ... Devices and devices for turning various drills ...
Chapter VI. Chisels ... Slotters ...
Chapter VII Various tools and accessories ... Devices for gluing ...
Chapter VIII. Sharpening  ...
Chapter IX The device and acquisition of a workshop ...
Division III. Different types of wooden joints ...
Division IV. Wooden surface finish ...
Division V. Furniture joinery ...
Division VI. Model business ...
Division VII. Machine building ...

2 200p
new

Журнал Мастер и мастерская 2020 1 (8). Новый журнал о столярке и деревообработке 'Мастер и мастерская' 

 

300p