Share / Save Link:
Description
The cooper bench has such a name because the coopers traditionally hewed rivets on it using a staple. Hence another name "bench for working with a scraper." Well, no matter how funny the “pedal horse” sounds, this is also about this unit.
Shaving horse is indispensable when working with staples, chips on long straight or slightly curved workpieces.
The workpiece is fixed by pressing the pedal with one foot. The workpiece is placed on the working table and clamped on top with a clamping sponge, which are covered with leather so as not to damage the parts.
The design of the horse is collapsible. All parts are fastened with bolts and self-locking nuts, as well as with wooden wedges.
Bench dimensions: height 860 mm, length of the bench itself 1650 mm (excluding the fact that the legs have a slope), width about 500 mm
The seat has the ability to adjust both horizontally (5 options) and vertically (stroke about 5 cm)
The minimum workpiece thickness is 1mm, the maximum workpiece thickness is 90mm.
The pedal for convenience has the ability to adjust in 2 positions.
The bench is made of beech wood.
Design and execution by the master carpentry workshop RUBANKOV
Made in Russia.
Share / Save Link:
Specs
Reviews
Instructions ()
Publications
Popular goods
Carving axe PETROGRAD, model Zvenigorod 7, handle n5
Wood carving axe Zvenigorod VII . This axe is made for artistic processing of wood, such as carving sculptures, bowl carving, dish carving and other stuff.
- Blade width 120 mm
- Sharpening angle - 25 degrees
- Hardness - 55-58HRc
- Handle lenght - 350 mm
- Full weight - 07 kg
Carving axe Zvenigorod VII is quite small and easy to control. It's weight is about 650g, makes it maneuverable and allows you to work more accurate and precise.
The shape of the axe head was designed for carving operations where palm is resting extreamly close to axe head or even on the axe head. This design helps to exelent control of the axe even during long carving sessions. Grip above the head is used for trimming, stripping. This axe model was based on samples from museum "Rubankov" and finalized taking into account the wishes of wood carvers.
The axe head is hand forged from steel 65Г (spring steel) and hardened to 55 - 58 HRc at the cutting edge and along the entire beard, the rest part is normalized to HB280. This hardening allows you to hit the poll without the risk of creating a cracks in the metal.
Head has mounted to handle on 3 wedges, one along the head eye and two in cross section.
Cutting edge is razor sharp and ready to work out of the box. Sharpening angle - 30 degrees.
Axe handle is made of maple* and coated with Danish oil**. The hatchet handle has a longitudinal bend. In cross-section the handle has the shape of an egg, which is very convenient for good grip while carving. Handle has a hole for hanging.
Woodcarving axe Zvenigorod VII are product of Petrograd toolworks and supplied in a leather case for protection of the cutting edge and easy storage. Made in Saint-Petersburg Russia.
Sharpening stone PETROGRAD, 200*70*20mm, 360 grit
Abrasive water stones. Grit: 150, 360, 500, 800, 1000,1500, 2000 and 4000 grit. Size 200x70x20mm. The abrasive grain is silicon carbide. Bond - ceramics. Hardness I ensures minimal wear of the stone during work. Steel does not overheat when sharpening. Does not require oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Manufactured in Russia.
Sharpening stone PETROGRAD, 200*70*20mm, 120 grit
Abrasive water stones. Grit: 120, 150, 360, 500, 800, 1000,1500, 2000 and 4000 grit. Size 200x70x20mm. The abrasive grain is silicon carbide. Bond - ceramics. Hardness I ensures minimal wear of the stone during work. Steel does not overheat when sharpening. Does not require oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Manufactured in Russia.
