%

Center Steady, PETROGRAD, Model N1

Люнет предназначен для создания дополнительной опоры при обработке длинных и не жестких заготовок.

  • Предназначен для станков с высотой центров 200мм.
  • Заготовок диаметром не более 260мм и не менее 15мм.
  • Изготовлен из фанеры толщиной 52мм.
  • Рассчитан на станину толщиной 11мм.
  • Расстояние между направляющими станины 49мм.
  • Имеет три точки опоры заготовки.
  • Колеса мягкие и не оставляют следов на заготовке.
  • Подшипники колес имеют пылезащитную конструкцию.
  • Также штанги имеют симметричную конструкцию и имеют возможность разворачиваться роликами внутрь.
  • Фиксация штанг, а также основания люнета производится вручную.
  • Перестройка на другой диаметр занимает всего за несколько секунд.

Люнет разработан начальником производства компании «Петроградъ» и преподавателем школы «Рубанков. нет» Дмитрием Николаевичем Пушиным.

Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ.
Сделано в России

15800p(0)
Отзывов: 1
Рейтинг :
%

Center Steady, PETROGRAD, Model N1

Люнет предназначен для создания дополнительной опоры при обработке длинных и не жестких заготовок.

  • Предназначен для станков с высотой центров 150мм.
  • Заготовок диаметром не более 200мм и не менее 15мм.
  • Изготовлен из фанеры толщиной 52мм.
  • Имеет три точки опоры заготовки.
  • Колеса мягкие и не оставляют следов на заготовке.
  • Подшипники колес имеют пылезащитную конструкцию.
  • Также штанги имеют симметричную конструкцию и имеют возможность разворачиваться роликами внутрь.
  • Фиксация штанг, а также основания люнета производится вручную.
  • Перестройка на другой диаметр занимает всего за несколько секунд.
Данный люнет предназначен для использования со станком Нова Комет 2
Имеется возможность изготовления люнета по индивидуальному запросу.

Люнет разработан начальником производства компании «Петроградъ» и преподавателем школы «Рубанков. нет» Дмитрием Николаевичем Пушиным.


Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ.
Сделано в России

15800p(0)
Отзывов: 1
Рейтинг :

Center Steady, PETROGRAD, Model N2, D300mm

The steady rest is designed to create additional support when processing long and not rigid workpieces.

Designed for machines with a center height of 150mm.
Billets with a diameter of not more than 180mm and not less than 15mm.
Made of 52mm plywood.
Designed for 11mm bed.
The distance between the guides of the bed is 49mm.
Has three points of support for the workpiece.
The wheels are soft and leave no marks on the workpiece.
The wheel bearings are dustproof.
Also, the rods have a symmetrical design and have the ability to roll inward with rollers.
The fixing of the rods, as well as the base of the steady rest, is done manually.
Conversion to a different diameter takes just a few seconds.
This steady rest is intended for use with the machine Nova Komet 2

The lunette was developed by the head of production of the Petrograd company and the teacher of the Rubankov school, Dmitry Nikolayevich Pushin.

Production - factory of joinery and carpentry tools PETROGRAD.
Made in Russia
25240p(0) out of stock
Отзывов: 1
Рейтинг :
%

Center Steady, PETROGRAD, Model N2, D320mm

The steady rest is designed to create additional support when processing long and not rigid workpieces.

Designed for machines with a center height of 160mm.
Billets with a diameter of no more than 200mm and no less than 15mm.
Made of 52mm plywood.
Designed for 11mm bed.
The distance between the guides of the bed is 49mm.
Has three points of support for the workpiece.
The wheels are soft and leave no marks on the workpiece.
The wheel bearings are dustproof.
Also, the rods have a symmetrical design and have the ability to roll inward with rollers.
The fixing of the rods, as well as the base of the steady rest, is done manually.
Conversion to a different diameter takes just a few seconds.
The lunette was developed by the head of production of the Petrograd company and the teacher of the Rubankov school, Dmitry Nikolayevich Pushin.

Production - factory of joinery and carpentry tools PETROGRAD.
Made in Russia
20100p(0)
Отзывов: 1
Рейтинг :

Center Steady, PETROGRAD, Model N2, D400mm

The steady rest is designed to create additional support when processing long and not rigid workpieces.

Designed for machines with a center height of 200mm.
Billets with a diameter of not more than 280mm and not less than 15mm.
Made of 52mm plywood.
Designed for 11mm bed.
The distance between the guides of the bed is 49mm.
Has three points of support for the workpiece.
The wheels are soft and leave no marks on the workpiece.
The wheel bearings are dustproof.
Also, the rods have a symmetrical design and have the ability to roll inward with rollers.
The fixing of the rods, as well as the base of the steady rest, is done manually.
Conversion to a different diameter takes just a few seconds.
The lunette was developed by the head of production of the Petrograd company and the teacher of the Rubankov school, Dmitry Nikolayevich Pushin.

Production - factory of joinery and carpentry tools PETROGRAD.
Made in Russia
28130p(0) out of stock
Отзывов: 1
Рейтинг :

Center Steady, PETROGRAD, Model N2, D460mm

The steady rest is designed to create additional support when processing long and not rigid workpieces.

Designed for machines with a center height of 230mm.
Billets with a diameter of not more than 340mm and not less than 15mm.
Made of 52mm plywood.
Designed for 11mm bed.
The distance between the guides of the bed is 63mm.
Has three points of support for the workpiece.
The wheels are soft and leave no marks on the workpiece.
The wheel bearings are dustproof.
Also, the rods have a symmetrical design and have the ability to roll inward with rollers.
The fixing of the rods, as well as the base of the steady rest, is done manually.
Conversion to a different diameter takes just a few seconds.
The lunette was developed by the head of production of the Petrograd company and the teacher of the Rubankov school, Dmitry Nikolayevich Pushin.

Production - factory of joinery and carpentry tools PETROGRAD.
Made in Russia
25980p(0)
Отзывов: 1
Рейтинг :
%

Center Steady, PETROGRAD, Model N2, D520mm

The steady rest is designed to create additional support when processing long and not rigid workpieces.

Designed for machines with a center height of 260mm.
Billets with a diameter of no more than 400mm and no less than 15mm.
Made of 52mm plywood.
Designed for 11mm bed.
The distance between the guides of the bed is 63mm.
Has three points of support for the workpiece.
The wheels are soft and leave no marks on the workpiece.
The wheel bearings are dustproof.
Also, the rods have a symmetrical design and have the ability to roll inward with rollers.
The fixing of the rods, as well as the base of the steady rest, is done manually.
Conversion to a different diameter takes just a few seconds.
The lunette was developed by the head of production of the Petrograd company and the teacher of the Rubankov school, Dmitry Nikolayevich Pushin.

Production - factory of joinery and carpentry tools PETROGRAD.
Made in Russia
29810p(0)
Отзывов: 1
Рейтинг :

Люнеты

Carving knife PETROGRAD, Bogorodsky type, 200mm/60mm

Carving knives for general use, as well as for large material removal. Blade length 40mm or 60mm, rounded butt. A comfortable oval redwood handle is saturated with oil and covered with shellac. The length of the handle - 115mm. Excellent knife for both beginners and professionals. The 2.5 mm thick blade is made of high carbon steel hardened to 59-61 HRc. All the knives are sharpened and ready to go. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

2700p
Отзывов: 1
Рейтинг:

Carving knife PETROGRAD, Finnish type, 175mm/45mm

Carving knives with a sharp tip are designed for detailing and working in hard to reach places. Blade length 45mm or 60mm, rounded butt. A comfortable oval redwood handle is saturated with oil and covered with shellac. The length of the handle - 115mm. Excellent knife for both beginners and professionals. The 2.5 mm thick blade is made of high carbon steel hardened to a 59-61 HRc. All the cutters are sharpened and ready to go. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

2500p
Отзывов: 1
Рейтинг:

Checkering tool complete C-1, 60°

Резец C-1, имеет 1 пирамидальный зуб. Угол вершины 90 и 60 градусов. Резец продается в сборе, имеют удобную рукоять из бука и шток с установленной на нем рабочей частью. Все резцы изготовлены из стали, прошли процесс закалки и обработки, для продолжительной и надежной работы.
Имеет V-образную форму с зубцами по обе стороны. Резец С-1 предназначен для нанесения оригинального макета рисунка, а также для углубления канавок после их нанесения, другими резцами.
Деревянная рукоятка хорошо сбалансирована и удобно лежит в руке.
На фотографии детально показаны зубцы. Обратите внимание на высокую рельефность, обеспечивающую быструю и ровную нарезку. Зубцы обеспечивает хорошее удаление всех твердых пород древесины.
Резцу все равно, что вырезать глубокие или мелкие пазы, прямые или закругленные углы, параллельные линии или перекрестную штриховку, по направлению волокна или поперек. Не нужно заново делать проход, чтобы обработать неровные участки. Ровной получается каждый элемент.

Ширина рабочей части 5 мм, длина рабочей части 11 мм, угол вершины 90 и 60 градусов.

Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ.

Сделано в России

900p
Отзывов: 1
Рейтинг:

Checkering tool complete C-1, 90°

Checkering tool C-1 has 1 pyramidal tooth. Angle top 90 degrees. All the cutters are made of steel, undergone the process of hardening and processing, for long and reliable work.
It is V-shaped with teeth on both sides. Checkering tool C-1 is designed for applying the original layout of the picture, as well as for deepening the grooves after their application, with other cutters.
The wooden handle is made of beech, well balanced and lies comfortably in your hand.
Pay attention to the high relief, providing fast and smooth cutting. The tines provide good removal of all hardwoods.
The cutter doesnt look like cutting - deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Equal each element is obtained.

The width of the working part is 5 mm, the length of the working part is 11 mm, the apex angle 90 degrees.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

900p
Отзывов: 1
Рейтинг:

Outdoor axe PETROGRAD, model Roslavl 7, scandy bevel, handle n11

Hand forged outdoor axe Roslavl VII with curved handle. Axe as a woodworking tool has superior cutting abilities, short handle and would be good choiсe for any outdoor activity like campings, spoon making, making bonfire and etc. This axe is ideal for those who want take a small axe for different ways of use when you are going out and about in the countryside. Although it is light, it can be used to fell a small or even midle tree, thanks to its handle and heavy, strong head. The axe is also excellent for delimbing a tree and making wooden stakes.

  • Total lenght is 370mm ( 14,57inch )
  • Height of axe is 140mm ( 5,51inch )
  • Lenght of cutting edge is 120mm ( 4,72inch )
  • Axe is hand forged from 65G steel (Germany 66Mn4, Ck67, USA 1066).
  • Curved cutting edge was straight sharpened.
  • Total weight of axe is 0,7kg  ( ± 0,05kg )
  • Handle lenght is 320mm ( 12,6inch) and it is made from solid mapple with right grain position.
  • The axe comes with leather case for protecting cutting edge.

Axe is well balanced and would be a good choice for a lot types of work. It will be great as outdoor axe, for small carpentry and othe woodwork projects. This is kind of universal axe for everyone.

Axe Roslavl VII produced by Petrograd toolworks in Saint Petersburg Russia.

Axe Roslavl VII Specifications:
Head weight: 0.63 kg
Full weight: 0.7 kg
Type: outdoor hatchet
Steel: 65Г
Hardness: 55-58HRc
Handle material: Ash*
Handle lenght: 320 mm
Edge: Curved
Sharpening angle: 30 degrees
Blade lenght: 120 mm
Total lenght: 370 mm
 * material of handles may changes from batch to batch.
** coating oil may changes too
13000p
Отзывов: 1
Рейтинг:
new

Spoon knife, PETROGRAD, type 1/22, left-handed

Ложкорез по дереву ПЕТРОГРАДЪ модель N1/22, это инструмент для резьбы деревянных ложек и других впуклых поверхностей. Основная задача ложкореза - выборка лунки в деревянной ложке (черпало). Выпускается двух видов: правый и левый. Производство фабрика Петроградъ (Россия)

3200p
Отзывов: 1
Рейтинг:
new

Carving knife PETROGRAD, skew type, 45 degrees

Нож для резьбы по дереву, ПЕТРОГРАДЪ, косая заточка 45град. Предназначен для широкого спектра работ. Рукоять выполнена из ясеня, угол скоса 45 градусов, инструментальная сталь. Производство фабрика Петроградъ (Россия).

2500p
Отзывов: 1
Рейтинг:

Butt chisel, PETROGRAD, model Neva, 6mm

Стамеска ПЕТРОГРАДЪ, серия Нева, 6мм. Стамески спроектированы, ориентируясь на многолетний опыт мастеров-краснодеревщиков. Форма лезвия имеет боковые скосы для работы в труднодоступных местах, например при подрезке и подчитки шиповых соединений: ласточкин хвост, шип-проушина, впол дерева, сковородней и прочие. Производятся с различной шириной полотна от 3мм до 26мм. Толщина лезвия переменная и увеличивается от режущей кромки к рукояти. Производство фабрика Петроградъ (Россия)

3300p
Отзывов: 1
Рейтинг:
new%

Outdoor axe PETROGRAD, model Roslavl X, handle

Топор кованый ПЕТРОГРАДЪ, модель Рославль 10, топорище н25. Отличается от других топоров удлиненной режущей кромкой. Благодаря этой особенности топор можно брать близким к полотну хватом и не бояться поранить руку при работе. Такой хват очень удобен при тёске и ошкуривании бревен. Удлиненная рукоять позволяет без лишних усилий рубить ветки и сучья. Производство фабрика Петроградъ (Россия).

15000p
Отзывов: 1
Рейтинг:
new

Масло камелии, KAPLEUM, Лаванда, 60 мл.

Масло камелии, KAPLEUM, Лаванда, 60 мл. Неформальная творческая группа GILDIA.PRO предлагает новый продукт, изготовленный на основе отлично зарекомендовавшего себя масла Камелии – KAPLEUM.

 

720p
Отзывов: 1
Рейтинг: