Wooden Clamp PETROGRAD 120mm*65mm

G-shaped wooden clamp PETROGRAD 120mm * 65mm! Opening width 118 mm. Weight -0.33kg. Clamping depth - 60 mm. The body is made of maple wood, the screw is made of hornbeam and all parts are coated with Danish oil. the body of the clamp is assembled for the connection of the spike and the lug and reinforced with a steel stud M6

G-shaped wooden clamp PETROGRAD, made at the factory of joinery and carpentry tools PETROGRAD.
Made in Russia.

7000p(0)
Отзывов: 1
Рейтинг :

Diamond Polishing Paste 5000 grit, 20 g

Diamond pastes are used for finishing the workpiece, grinding or polishing. This is helped by pastes containing micropowder on a binder basis: oleic acid, stearin, wax, gasoline, kerosene, castor oil and other substances.
Diamond pastes are used for different types of surfaces. It is important to remember that when finishing, you should use two or three pastes with different sizes of abrasive grains, going from coarse to finer. The harder the material to be processed, the larger the size of the abrasive should be. Choosing the right diamond polishing paste will help you avoid unnecessary effort and save time.

250p(0)
Отзывов: 1
Рейтинг :

Diamond Polishing Paste 2000 grit, 20 g

Diamond pastes are used for finishing the workpiece, grinding or polishing. This is helped by pastes containing micropowder on a binder basis: oleic acid, stearin, wax, gasoline, kerosene, castor oil and other substances.
Diamond pastes are used for different types of surfaces. It is important to remember that when finishing, you should use two or three pastes with different sizes of abrasive grains, going from coarse to finer. The harder the material to be processed, the larger the size of the abrasive should be. Choosing the right diamond polishing paste will help you avoid unnecessary effort and save time.

480p(0)
Отзывов: 1
Рейтинг :

Diamond Polishing Paste 10000 grit, 20 g

Diamond pastes are used for finishing the workpiece, grinding or polishing. This is helped by pastes containing micropowder on a binder basis: oleic acid, stearin, wax, gasoline, kerosene, castor oil and other substances.
Diamond pastes are used for different types of surfaces. It is important to remember that when finishing, you should use two or three pastes with different sizes of abrasive grains, going from coarse to finer. The harder the material to be processed, the larger the size of the abrasive should be. Choosing the right diamond polishing paste will help you avoid unnecessary effort and save time.

300p(0)
Отзывов: 1
Рейтинг :

The book `Business in carpentry`, Bazhan Yu.P.

Book "Modern carpentry workshop", Bazhan Yu.P. Nizhny Novgorod. 2021. Hardcover, 206p. Glossy coated paper.
1500p(0)
Отзывов: 1
Рейтинг :

Axe Anika, carving model

A light ax is useful for wood carving. The beveled chamfer of the cutting edge makes this ax aggressive. This forged ax, made of steel ШХ15, blade hardening is about 58HRC. The handle is made of ash and covered with oil.
It is completed with a leather case with a holster clasp. Reliably protects the cutting edge.
Total length approx. 360 mm.
RK about 100 mm.
The ax weighs only 800 grams.

The manufacturer has the right, without prior notice, to make changes to the product that do not impair its technical characteristics, but are the result of work to improve its design or production technology.
10600p(0) 11 200 p
Отзывов: 1
Рейтинг :

Volcanite disc 150mm*32mm*32mm, 180grit

Designed for grinding steel parts. Used for grinding and polishing metals and minerals.
Vulcanite polishing wheel with rubber base with abrasive grit. The mineral is volcanite. The binder contains rubber. Because of this, vulcanite polishing wheels are also called rubber.
The diameter of the circle is 150mm, the width of the circle is 32mm. Landing hole 32mm. Gritness - 180.
1200p(0)
Отзывов: 1
Рейтинг :

Felt disc, 90mm/20mm, stift D5mm

Felt disc, 90mm/20mm, stift D5mm. Coarse wheels are characterized by increased wear resistance and durability. Felt wheels for roughing or pre-processing of parts. Installed in a cam-type chuck or on the machine shaft.

Grinding wheels are intended:
  • for the processing of non-ferrous metals;
  • for polishing metal surfaces;
  • for glass polishing;
  • for polishing plastic.
Circle diameter - 90mm.
Circle width - 20mm.
Pulley diameter - 5mm.
200p(0)
Отзывов: 1
Рейтинг :

Felt disc, 125mm/20mm

Диск полировальный, войлок, D125мм/20мм. Грубошерстные круги отличаются повышенной износостойкостью и долговечностью. Войлочные круги предназначаются для черновой или предварительной обработки металлических поверхностей и деталей. Устанавливаются в патрон кулачкового типа или непосредственно на вал шлифовального станка.
200p(0)
Отзывов: 1
Рейтинг :

Metal Works by Kilsey John

Guide to working with metal and other materials. The book is aimed at novice craftsmen and hobbyists, for those who are interested in DIY projects. Illustrated encyclopedia, which describes the basics of locksmith production, properties, technologies and methods of working with metal.
600p(0)
Отзывов: 1
Рейтинг :

Diamond Round Wheel Dresser, 1.73

Diamond Round Wheel Dresser (diamond rule), intended for leveling and dressing vitrified abrasive wheels. The same tool is used for the initial opening of the abrasive. The peculiarity of the pencil lies in the heavy-duty ruling diamond tip, and in the super-hard bond that holds it.
Characteristics of a diamond pencil:
The diameter of the diamond insert is 10 mm.
Superhard ligament
Total weight of diamonds: 1.73 carats.
* For the diamond pencil to work properly, it must be held at the correct angle to the grinding wheel.
960p(0) 3 130 p
Отзывов: 1
Рейтинг :
%

Gran-Comfort sharpening gauge

Knife sharpener with adjustable sharpening angle and swivel mechanism. Edge-Comfort machine for correct sharpening of knives, with setting the exact sharpening angle.
Ideal for both long and short knives, for which the sharpening angle must be kept exactly along the entire length. For sharpening short knives, you can bring the knife clamps closer to the center.
The rod sliding mechanism has been improved. This gives the sharpener maximum precision. No backlash and complete freedom of movement of the blank with abrasive in any direction.
The machine allows you to set almost any half or full angle for the future knife edge. Allows you to both remove a new edge from a killed knife, and fix an already sharpened one. Allows you to sharpen a knife to a razor sharpness. It is possible to bring out micro-leads. Allows you to polish the edge.
11490p(0)
Отзывов: 1
Рейтинг :

Line sharpening gauge

Knife sharpener "Line". Ideal for both long and short knives. The machine allows you to set almost any angle for the future edge of the knife. Allows you to both bring out a new edge of the knife and fix an already sharpened one. Allows you to sharpen a knife to a razor sharpness. This machine is equipped with a universal abrasive mount. The swivel mechanism is the most important unit of a straightening machine for sharpening knives. Designed for modernization or self-assembly of a knife sharpening machine. Manufactured on a CNC machine.
7490p(0) 8 090 p
Отзывов: 1
Рейтинг :
%

SayLift Pedestal sharpening gauge

Sylift-Pedestal knife sharpener. Allows you to sharpen a knife to a razor sharpness. Allows you to sharpen all knives: from very short to long fillet knives. The Sylift system consists of two vertical hardened steel rods, carriages on linear bearings with a lock. A massive steel base (body) with rubberized stops is made of a steel plate 10mm thick. A duralumin superstructure is installed on the plate for fastening the rotary mechanism.

minimum sharpening angle 10 degrees per side
maximum sharpening angle 35 degrees per side
base length 240 mm
base width 235 mm
duralumin superstructure height 80 mm
angle of inclination of the swivel mechanism relative to the table 10 degrees
pedestal weight 4kg
17190p(0) 18 570 p
Отзывов: 1
Рейтинг :

Abrasive stone holder

Abrasive stone holder, metal. Device for holding grinding abrasives: diamond stones, water stones, oil stones, ceramics and other abrasives. Adjustable parts of the holder allow you to fix stones of different sizes.
This stand allows the stone to be lifted off the table, making the sharpening process more convenient. Helps to more accurately position the tool in relation to the grinding abrasive.
Together with this holder, we recommend purchasing the Petrograd anti-slip mat.
5990p(0)
Отзывов: 1
Рейтинг :
%

SayLift Universal sharpening gauge

Точилка "Сайлифт-Универсал", с регулируемым углом заточки и поворотным мехнизмом. Приспособление для заточки позволяет заточить ножи, топоры, стамески, ножницы до бритвенной остроты. Системы “Сайлифт”состоит из двух вертикальных стальных закаленных штанг, каретки на линейных подшипниках с фиксатором. Стальное массивное основания (корпус) с подрезиненными упорами выполнено из стальной пластины толщиной 10мм. На пластине установлена дюралевая надстройка для крепления поворотного механизма.

На двух вертикальных стальных закаленных штангах скользит на линейных подшипниках каретка. Каретка перемещается вверх и вниз вращением винтов слева и справа, которые находятся на одном валу с зубчатыми колесами.

Зубчатые колеса работают в паре с двумя зубчатыми ремнями.

Каретка снабжена фиксатором, который предотвращает свободное перемещение каретки во время заточки ножа.

18490p(0)
Отзывов: 1
Рейтинг :

Axe sharpening gauge

Sharpener for axes. The machine allows you to set almost any half or full angle for the future edge. Allows you to sharpen an ax to a razor sharpness. It is possible to bring out micro-leads. Allows you to polish the edge. Axes sharpened on this machine are no less sharp than those sharpened on a large professional machine.

base length 300 mm

base width 300 mm

length of a rod for clamping abrasives 660 mm

Aluminum base (body)
6190p(0) 6 690 p
Отзывов: 1
Рейтинг :

Volcanite disc 150mm*8mm*32mm, 180grit

Designed for grinding steel parts. Used for grinding and polishing metals and minerals.
Vulcanite polishing wheel with rubber base with abrasive grit. The mineral is volcanite. The binder contains rubber. Because of this, vulcanite polishing wheels are also called rubber.
The diameter of the circle is 150mm, the width of the circle is 8mm. Landing hole 32mm. Gritness - 180.

300p(0)
Отзывов: 1
Рейтинг :

Magazine Master&Workshop 2022 № 3 (16)

Журнал Мастер и мастерская 2022 № 3 (16). Это периодический журнал о деревообработке, мастерах и мастерских, о новостях столярного мира. Лучшие мастера делятся со всеми желающими своими знаниями и опытом. Иллюстрированный специализированный полноцветный журнал.

1000p(0) out of stock
Отзывов: 1
Рейтинг :
%

Conical countersink for woodworking, D10mm

Зенковка Петроградъ, D10мм. Предназначена для зенкования отверстий с углом фаски 80град . Одна режущая грань позволяет избежать дребезга при обработке отверстий ручным электрическим инструментом. Выполнены из быстрорежущей стали. Производство фабрика Петроградъ (Россия).
660p(0) out of stock
Отзывов: 1
Рейтинг :

Выведено из продажи - страница 13

Нож для резьбы по дереву, ПЕТРОГРАДЪ, Богородский, 200мм/60мм

Нож резчицкий ПЕТРОГРАДЪ, Богородский, 190мм/60мм. Резчицкие ножи общего назначения, а также для большого удаления материала. Отличный нож как для начинающих так и для профессионалов. Все ножи заточены и готовы к работе.
Для выбора нужного ножа нажмите на название товара
2700p
Отзывов: 1
Рейтинг:

Нож для резьбы по дереву, ПЕТРОГРАДЪ, финский, 180мм/40мм

Резчицкие ножи с острым кончиком предназначены для деталировки и работы в труднодоступных местах. Длина лезвия 45мм или 60мм, скругленный обух. Угол заточки 23±2°. Удобная овальная рукоять из ценных пород древесины, покрыта маслом. Длина рукояти - 115мм. Отличный нож как для начинающих так и для профессионалов. Лезвие толщиной 2,5мм выполнено из высокоуглеродистой стали с закалкой до твердости 59-61 HRc. Все резцы заточены и готовы к работе. Производство Петроград (Россия).
Для выбора нужного ножа нажмите на название товара
2500p
Отзывов: 1
Рейтинг:

Резец для чекеринга C-1, 60° (одна РК)

Резец C-1, имеет 1 пирамидальный зуб. Угол вершины 90 и 60 градусов. Резец продается в сборе, имеют удобную рукоять из бука и шток с установленной на нем рабочей частью. Все резцы изготовлены из стали, прошли процесс закалки и обработки, для продолжительной и надежной работы.
Имеет V-образную форму с зубцами по обе стороны. Резец С-1 предназначен для нанесения оригинального макета рисунка, а также для углубления канавок после их нанесения, другими резцами.
Деревянная рукоятка хорошо сбалансирована и удобно лежит в руке.
На фотографии детально показаны зубцы. Обратите внимание на высокую рельефность, обеспечивающую быструю и ровную нарезку. Зубцы обеспечивает хорошее удаление всех твердых пород древесины.
Резцу все равно, что вырезать глубокие или мелкие пазы, прямые или закругленные углы, параллельные линии или перекрестную штриховку, по направлению волокна или поперек. Не нужно заново делать проход, чтобы обработать неровные участки. Ровной получается каждый элемент.

Ширина рабочей части 5 мм, длина рабочей части 11 мм, угол вершины 90 и 60 градусов.

Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ.

Сделано в России

900p
Отзывов: 1
Рейтинг:

Резец для чекеринга C-1, 90° (одна РК)

Резец C-1, имеет 1 пирамидальный зуб. Угол вершины 90 и 60 градусов. Резец продается в сборе, имеют удобную рукоять из бука и шток с установленной на нем рабочей частью. Все резцы изготовлены из стали, прошли процесс закалки и обработки, для продолжительной и надежной работы.
Имеет V-образную форму с зубцами по обе стороны. Резец С-1 предназначен для нанесения оригинального макета рисунка, а также для углубления канавок после их нанесения, другими резцами.
Деревянная рукоятка хорошо сбалансирована и удобно лежит в руке.
На фотографии детально показаны зубцы. Обратите внимание на высокую рельефность, обеспечивающую быструю и ровную нарезку. Зубцы обеспечивает хорошее удаление всех твердых пород древесины.
Резцу все равно, что вырезать глубокие или мелкие пазы, прямые или закругленные углы, параллельные линии или перекрестную штриховку, по направлению волокна или поперек. Не нужно заново делать проход, чтобы обработать неровные участки. Ровной получается каждый элемент.

Ширина рабочей части 5 мм, длина рабочей части 11 мм, угол вершины 90 и 60 градусов.

Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ.

Сделано в России

900p
Отзывов: 1
Рейтинг:

Топор кованый ПЕТРОГРАДЪ, модель Рославль 7, топорище н11, РК - сканди

Топор кованный походный с изогнутой рукоятью. Общая длина - 370 мм. Высота топора - 140 мм. Длина режущей кромки - 120 мм. Топор выкован вручную из стали 65Г. Заточка прямая. Общая масса - 0,7 ± 0,05 кг. В комплекте кожаный чехол для защиты лезвия. Топорище выполнено из древесины клёна, длиной 320 мм. Топор отлично сбалансирован и подойдет для огромного вида работ, как походный топор, для небольших плотницких и столярных работ и просто как универсальный топор. 

Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ.

Сделано в России

13000p
Отзывов: 1
Рейтинг:
new

Нож для резьбы по дереву, ПЕТРОГРАДЪ, Ложкорез, модель N1/22, левый

Ложкорез по дереву ПЕТРОГРАДЪ модель N1/22, это инструмент для резьбы деревянных ложек и других впуклых поверхностей. Основная задача ложкореза - выборка лунки в деревянной ложке (черпало). Выпускается двух видов: правый и левый. Производство фабрика Петроградъ (Россия)

3200p
Отзывов: 1
Рейтинг:
new

Нож для резьбы по дереву, ПЕТРОГРАДЪ, флажок 45град, 180мм/40мм

Нож для резьбы по дереву, ПЕТРОГРАДЪ, косая заточка 45град. Предназначен для широкого спектра работ. Рукоять выполнена из ясеня, угол скоса 45 градусов, инструментальная сталь. Производство фабрика Петроградъ (Россия).

2500p
Отзывов: 1
Рейтинг:

Стамеска ПЕТРОГРАДЪ, серия Нева, 6мм

Стамеска ПЕТРОГРАДЪ, серия Нева, 6мм. Стамески спроектированы, ориентируясь на многолетний опыт мастеров-краснодеревщиков. Форма лезвия имеет боковые скосы для работы в труднодоступных местах, например при подрезке и подчитки шиповых соединений: ласточкин хвост, шип-проушина, впол дерева, сковородней и прочие. Производятся с различной шириной полотна от 3мм до 26мм. Толщина лезвия переменная и увеличивается от режущей кромки к рукояти. Производство фабрика Петроградъ (Россия)

3300p
Отзывов: 1
Рейтинг:
new%

Топор кованый ПЕТРОГРАДЪ, модель Рославль 10, топорище н25

Топор кованый ПЕТРОГРАДЪ, модель Рославль 10, топорище н25. Отличается от других топоров удлиненной режущей кромкой. Благодаря этой особенности топор можно брать близким к полотну хватом и не бояться поранить руку при работе. Такой хват очень удобен при тёске и ошкуривании бревен. Удлиненная рукоять позволяет без лишних усилий рубить ветки и сучья. Производство фабрика Петроградъ (Россия).

15000p
Отзывов: 1
Рейтинг:
new

Масло камелии, KAPLEUM, Лаванда, 60 мл.

Масло камелии, KAPLEUM, Лаванда, 60 мл. Неформальная творческая группа GILDIA.PRO предлагает новый продукт, изготовленный на основе отлично зарекомендовавшего себя масла Камелии – KAPLEUM.

 

720p
Отзывов: 1
Рейтинг: