Carving chisel, PETROGRAD, dovetail, 12mm
The model range is represented by straight chisels with an expanding blade with a working part width of 8 mm, 10 mm, 12 mm. They have a wide range of applications for both carving and woodworking such as fitting joints on dovetail. Chisels are made of steel 65G (Germany 66Mn4, Ck67, USA 1066) and have beech handles coated with tung oil. Blade length - 35 mm, total length - 180 mm, sharpening angle - 30 degrees, blade thickness - 2 mm.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
Natural lapping stone PETROGRAD, 200*70*20mm
Lapping stone from gabbro diabase. Used for lapping the soles of planes, abrasive stones and other surfaces. It has a perfectly smooth surface. Lapping is carried out with abrasive powders or diamond pastes. Approximate dimensions: 200x70x20 mm. Made in Russia.
Gabbro diabase is a fine-grained full-crystalline volcanic rock, which in its chemical and mineral composition is quite close to basalt and most often has a black color. A characteristic feature of this stone is high hardness and considerable compressive strength. One of the distinguishing features of this natural stone is the relatively low content of silica in it (about 45-52%). The color of the mineral may be different. There are samples that are black, dark gray and even greenish-black color. The stone has a diabase (it is also called an ophitic) structure, which is formed by randomly located and elongated crystals of plagioclase, the whole space between which is occupied by augite.
One-sided bar with glued leather
One-sided bar with glued leather. Bar size - 150x30x13 mm. Can be used with or without polishing pastes. Material - ash, leather - smooth - 2 mm. Skin color may differ from the image on the website. Production - Russia
PETROGRAD Carpenter Axe, model Murom 15, handle n9
Топоры плотницкие ПЕТРОГРАДЪ Муром - своеобразное продолжение и развитие линейки замечательных топоров ТопорСиба (модель - "Реставрационный"). Топоры прошли корректировку по рекомендациям Союза Плотников, лично Дмитрия Александровича Соколова. Отков выполнен из стали 65Г, рукоять выполнена из клена, обработана тунговым маслом и зафиксирована двумя клиньями крестообразно.
Outdoor axe PETROGRAD, model Chernigov IX
Outdoor axe. Total length - 440 mm. The length of the cutting edge 75 mm. The axe is forged by hand from 65G (Germany 66Mn4, Ck67, USA 1066) steel. Sharpening lens-shaped. Shock reinforced butt. Total weight - 0.9 kg. Includes leather case to protect the blade. The axe handle is made of maple wood. The axe is perfectly balanced and is suitable for cutting down, cutting off branches, driving wedges and other hiking needs. In Canada, supporters of rafting and canoeing called this axe - Canoe Axe. Totally hand made at PETROGRAD factory of joinery and carpentry tools.
Made in Russia
Wooden jointer plane PETROGRAD, 60mm/600mm
Traditional wooden jointer. The plane is made of maple with brass insert for reliable fixation of the blade, the sole is made of hornbeam, the handle is made of paduk. Coating - tung oil and wax. The wedge is also made of maple. The installation angle of the knife is 50°. The blade is made of alloyed tool steel 9XC (DIN - 150Cr14) hardened to 59-61 HRC. Blade dimensions: length - 175 mm, width - 60 mm, knife thickness minimum 3.5 mm, maximum thickness - 4.8 mm. Sharpening angle 25° with microbevel 30°. Dimensions of jointer plane 600 * 80 * 175 mm.
All blades are wedge-shaped with a wedge angle of 0.5 degrees, which favorably distinguishes them from others, and are ideally suited for wooden planes with wedge fixation.
Blades have two sides - one is hard, the other is soft (production feature)
Absolutely every blade is tested with a hardness tester.
The solid side has 2 points from the diamond cone - the test, and the control test.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
The manufacturer reserves the right to change the thickness and appearance of the knife without degrading the working qualities of the tool.

