Categories
Straight Gouge Rubankov, N45, V-tool 90 degree, 6mm
RUBANKOV corner chisels are forged from low alloy high carbon steel.
The faceted handle is made of fine wood and coated with oil. The striking side is rounded to avoid corns on the palms. The brass ring gives a sophisticated look and prevents the handle from cracking when working with a mallet. The inner profile of the chisel is polished, the cutting edge is sharpened and ready to work.
These models are percussion models, they can be paired with a mallet.
The stated geometric dimensions may vary slightly, since the tool is manufactured and sharpened by hand.
The length of the metal blade is 145mm.
Total length with a handle 280mm.
Blade width - 6mm.
The angle of the internal profile of the chisel is 90 degrees.
Angle of sharpening of the cutting edge (RK) - 25 degrees.
Hardened to 59-61 HRc.
Manufactured at the PETROGRAD joinery and carpentry tools factory.
Production Russia.
Straight Gouge Rubankov, N45, V-tool 90 degree, 12mm
RUBANKOV corner chisels are forged from low alloy high carbon steel.
The faceted handle is made of fine wood and coated with oil. The striking side is rounded to avoid corns on the palms. The brass ring gives a sophisticated look and prevents the handle from cracking when working with a mallet. The inner profile of the chisel is polished, the cutting edge is sharpened and ready to work.
These models are percussion models, they can be paired with a mallet.
The stated geometric dimensions may vary slightly, since the tool is manufactured and sharpened by hand.
The length of the metal blade is 145mm.
Total length with a handle 280mm.
Blade width - 12mm.
The angle of the internal profile of the chisel is 90 degrees.
Angle of sharpening of the cutting edge (RK) - 25 degrees.
Hardened to 59-61 HRc.
Manufactured at the PETROGRAD joinery and carpentry tools factory.
Production Russia.
Эйсмусы уголковые стамески
Popular goods
Carpenter drawknife PETROGRAD N3, half round, R60, 170mm, Russian type
A semicircle drawknife N3 with arms curved upwards will be convenient for various operations in the carpentry: precise fit of the logs to size, quick material removal, as well as a selection of recesses. Made in Saint Petersburg Russia.
- blade was forged manually
- made of tool steel 65G (Germany 66Mn4, Ck67, USA 1066)
- hardened to 55-58 HRC
- blade curvature radius - 60mm
- sharpening - lenticular.
The design of the drawknives N3, as well as it sharpening, is recommended by the Russian Carpenters Union for debarking and carpentry work on fitting logs. Other kind of carpentry work may require regrinding. Blade was fully hardened through, it allows you to repeatedly honing the blade or his fully re-grind it.
- handles are 140mm long
- made of beech and covered with oil
- length of the blade - 170mm
- blade width - 36 mm.
- Blade thickness - 6mm
- sharpening angle - 30grad
- Comes with a leather case with a clasp on the buttons.
*The sizes of the staple in the batch may vary slightly.
| Blade lengh: | 170 mm |
|---|---|
| Steel: | 65G steel |
| Shape: | semicircle |
| Handle lenght: | 140 mm |
| Weight: | 0,5 kg |
Carving axe PETROGRAD, model Zvenigorod 7, handle n5
Wood carving axe Zvenigorod VII . This axe is made for artistic processing of wood, such as carving sculptures, bowl carving, dish carving and other stuff.
- Blade width 120 mm
- Sharpening angle - 25 degrees
- Hardness - 55-58HRc
- Handle lenght - 350 mm
- Full weight - 07 kg
Carving axe Zvenigorod VII is quite small and easy to control. It's weight is about 650g, makes it maneuverable and allows you to work more accurate and precise.
The shape of the axe head was designed for carving operations where palm is resting extreamly close to axe head or even on the axe head. This design helps to exelent control of the axe even during long carving sessions. Grip above the head is used for trimming, stripping. This axe model was based on samples from museum "Rubankov" and finalized taking into account the wishes of wood carvers.
The axe head is hand forged from steel 65Г (spring steel) and hardened to 55 - 58 HRc at the cutting edge and along the entire beard, the rest part is normalized to HB280. This hardening allows you to hit the poll without the risk of creating a cracks in the metal.
Head has mounted to handle on 3 wedges, one along the head eye and two in cross section.
Cutting edge is razor sharp and ready to work out of the box. Sharpening angle - 30 degrees.
Axe handle is made of maple* and coated with Danish oil**. The hatchet handle has a longitudinal bend. In cross-section the handle has the shape of an egg, which is very convenient for good grip while carving. Handle has a hole for hanging.
Woodcarving axe Zvenigorod VII are product of Petrograd toolworks and supplied in a leather case for protection of the cutting edge and easy storage. Made in Saint-Petersburg Russia.
Bent Gouge Rubankov, N7, 30mm
Bent Gouge Rubankov, N7, 30mm (1.8 inches)
Carving chisel "Rubankov" Bent Gouge N7, 30mm ( 1.8 inches ). Perfectly suits for volume carving and deep hollow carving. The width of the cutting edge is 30mm ( 1.8inches ). The total lenght of the gouge is 280mm (11.02inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 135mm (5.31inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.
Gouge is sharpened, honed and fully ready to work out of the box.
This model is for hand cutting and can be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )
Checkering tool complete B-1
Checkering too B-1, is a 2 conical cutter with a working angle of 90 degrees, separated by a wide groove with teeth. A tool for making the roller around the notch. Pay attention to the high relief, providing fast and smooth cutting. The tines provide good removal of all hardwoods.
A cutter is just the same as cutting deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Smoothly each groove is obtained.
Maximum roller height 1 mm, width 2.5 mm
Made in Russia.
Checkering tool complete C-1, 60°
Резец C-1, имеет 1 пирамидальный зуб. Угол вершины 90 и 60 градусов. Резец продается в сборе, имеют удобную рукоять из бука и шток с установленной на нем рабочей частью. Все резцы изготовлены из стали, прошли процесс закалки и обработки, для продолжительной и надежной работы.
Имеет V-образную форму с зубцами по обе стороны. Резец С-1 предназначен для нанесения оригинального макета рисунка, а также для углубления канавок после их нанесения, другими резцами.
Деревянная рукоятка хорошо сбалансирована и удобно лежит в руке.
На фотографии детально показаны зубцы. Обратите внимание на высокую рельефность, обеспечивающую быструю и ровную нарезку. Зубцы обеспечивает хорошее удаление всех твердых пород древесины.
Резцу все равно, что вырезать глубокие или мелкие пазы, прямые или закругленные углы, параллельные линии или перекрестную штриховку, по направлению волокна или поперек. Не нужно заново делать проход, чтобы обработать неровные участки. Ровной получается каждый элемент.
Ширина рабочей части 5 мм, длина рабочей части 11 мм, угол вершины 90 и 60 градусов.
Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ.
Сделано в России
Bench Chisel, PETROGRAD, model Istra short, 40mm
Forged carpentry short chisels Istra with a straight cutting edge and a wooden handle, has designed for hard work. The basis for the manufacture of chisels Istra was taken the form of old Russian chisels from the old tools museum Rubankov, and also takes into account long-term experience in the development of professional carpentry and carpentry tools of other toolworks.
The blade has forged manually from steel ШХ15 (USA analog is 52100, G52986, J19965; Germany analog of 1.3505, 100Cr6, 102Cr6) and hardened to 61-63HRC. Carpentry chisels are intended for timber framing for processing deep grooves in logs and timber as an indispensable tool for the construction of frame structures in the style of timber frame, post-and-beam half-timbered, fachwerkhaus, Log house.
- Chisel blade fastened to the handle with a conical socket.
- The thickness of the blade at the neck is 11 mm, the thickness in the area of the descent is 7 mm.
- The handles are made of ash and crimped with a stainless ring to harden the butt when working with a mallet or hammer.
- Available in widths of 19 mm, 25 mm, 38 mm, 40 mm and 50 mm ( see full catalogue).
- Blade length 290 mm, full length 400 mm.
- The wedge-shaped blade prevents jamming in the wood.
Carpentry chisels Istra are totally hand made at PETROGRAD toolworks of joinery and carpentry tools. Made in Saint-Petersburg Russia.
| Weight: | 0.71 kg |
|---|---|
| Type: | Short chisel |
| Steel: | ШХ15 |
| Handle material: | Ash* |
| Handle lenght: | 110 mm |
| Edge: | Straight |
| Edge width: | 40 mm |
| Blade lenght: | 290 mm |
| Total lenght: | 400 mm |
Outdoor axe PETROGRAD, model Roslavl 7, scandy bevel, handle n11
Hand forged outdoor axe Roslavl VII with curved handle. Axe as a woodworking tool has superior cutting abilities, short handle and would be good choiсe for any outdoor activity like campings, spoon making, making bonfire and etc. This axe is ideal for those who want take a small axe for different ways of use when you are going out and about in the countryside. Although it is light, it can be used to fell a small or even midle tree, thanks to its handle and heavy, strong head. The axe is also excellent for delimbing a tree and making wooden stakes.
- Total lenght is 370mm ( 14,57inch )
- Height of axe is 140mm ( 5,51inch )
- Lenght of cutting edge is 120mm ( 4,72inch )
- Axe is hand forged from 65G steel (Germany 66Mn4, Ck67, USA 1066).
- Curved cutting edge was straight sharpened.
- Total weight of axe is 0,7kg ( ± 0,05kg )
- Handle lenght is 320mm ( 12,6inch) and it is made from solid mapple with right grain position.
- The axe comes with leather case for protecting cutting edge.
Axe is well balanced and would be a good choice for a lot types of work. It will be great as outdoor axe, for small carpentry and othe woodwork projects. This is kind of universal axe for everyone.
Axe Roslavl VII produced by Petrograd toolworks in Saint Petersburg Russia.
| Head weight: | 0.63 kg |
|---|---|
| Full weight: | 0.7 kg |
| Type: | outdoor hatchet |
| Steel: | 65Г |
| Hardness: | 55-58HRc |
| Handle material: | Ash* |
| Handle lenght: | 320 mm |
| Edge: | Curved |
| Sharpening angle: | 30 degrees |
| Blade lenght: | 120 mm |
| Total lenght: | 370 mm |
** coating oil may changes too
Sharpening stone PETROGRAD, 153*15*15mm, 1500 grit
Sharpening stone PETROGRAD. Granularity: 150, 360, 500, 800, 1000, 1500 and 2000. Size 15x15x153mm. The abrasive grain is silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during work. When sharpening, the steel does not overheat. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Manufactured in Russia.
Outdoor axe PETROGRAD, model Roslavl VII, handle n11
Топор кованный Рославль 7 с заточка в линзу и с изогнутой рукоятью, это прекрасный выбор для ценителей настоящих качественных топоров. Топор подойдет для кратковременного похода или вылазки на природу. Такой топор никогда не подведёт в нужную минуту. Топор прекрасно сбалансирован и подойдет для широкого вида работ в лесу, как походный топор на охоту или рыбалку. В комплекте с топором идет кожаный чехол для защиты лезвия. Производство фабрика Петроградъ (Россия)