Straight Gouge Rubankov, N45, V-tool 90 degree, 6mm



Rating : (1)
Shipping: worldwide

4500 p (69.21) out of stock

Description

Straight Gouge Rubankov, N13, V-tool 90 degree, 6mm. Professional grade carving tools designed for hard and soft wood carving. The basis of any set of cutting tools is the corners. Corner chisels are suitable for a variety of tasks: creating curly shapes, decorating wooden surfaces, prescribing patterns in geometric carvings.

RUBANKOV corner chisels are forged from low alloy high carbon steel.
The faceted handle is made of fine wood and coated with oil. The striking side is rounded to avoid corns on the palms. The brass ring gives a sophisticated look and prevents the handle from cracking when working with a mallet. The inner profile of the chisel is polished, the cutting edge is sharpened and ready to work.
These models are percussion models, they can be paired with a mallet.
The stated geometric dimensions may vary slightly, since the tool is manufactured and sharpened by hand.

The length of the metal blade is 145mm.
Total length with a handle 280mm.
Blade width - 6mm.
The angle of the internal profile of the chisel is 90 degrees.
Angle of sharpening of the cutting edge (RK) - 25 degrees.
Hardened to 59-61 HRc.
Manufactured at the PETROGRAD joinery and carpentry tools factory.
Production Russia.

Share / Save Link:

Specs

Reviews

Instructions ()

Нет файлов

Publications

Recommended products

Magazine Master&Workshop 2021 № 1 (11)

This is a periodical magazine about woodworking, craftsmen and workshops, about the news of the carpentry world. The best masters share their knowledge and experience with everyone. Illustrated specialized full-color magazine.

1000p(69.21)
Отзывов: 1
>Рейтинг:

Strop PETROGRAD, for carving tools, 150mm*30mm

The bar with glued leather is designed for finishing semi-circular chisels, drawknives, etc. One of the flat sides can also be used for fine-tuning of flat tools. The size of the bar is 150x30 mm. Min radius - 3 mm, max. radius -6 mm. It can be used with polishing pastes. Material - ash, leather - reversal 2mm. Leather color may differ from the image on the site. Made in Russia.

900p
Отзывов: 1
Рейтинг:

Picture framing glazier's hammer, PETROGRAD, model N2

Picture framing hammer or glazier's hammer is a hammer with rotating head for strike nails in frame of picture. Because of its 360 degree rotating triangle head it can be easily position on back of a picture frame and precise strike on nail by slide over surface.

  • hammer weight 180 grams
  • steel rotating triangle head
  • steel round head
  • full head lenght 70mm
  • round head diameter 15mm
  • triangle head diameter 22mm
3200p
Отзывов: 1
Рейтинг:

Leather fingertip for woodcarvers

Leather fingertip is a thumb guard for wood carvers by Petrograd toolworks. Designed to protect hands from sharp tools. Thumb guard protects your finger from cut injuries when you are moving the cutting tool towards thumb, and prevents the formation of calluses when working away from yourself. Watch pictures for more info.

  • made of 2mm leather
  • easy to use
  • save you from injures

Guard has a special ring that prevents it from slipping during operation. The thimble was made of 2mm soft leather, which provides good protection for the toe.

Thumb guard was made by Petrograd toolworks in Saint Petersburg Russia

600p
Отзывов: 1
Рейтинг:

Spoon carving kit N1, small

Small spoon carving kit N1 for carving wooden spoons. This is the so-called starter set that will allow you to cut your first spoon without obstruction, for this the set includes Linden blanks and printed spoon templates. Production of Petrograd toolwroks in Saint Petersburg ( Russia )
Starters spoon carving kit includes:
  • Spoon knife type 1, D 27mm, right-handed
  • Carving knife Bogorodsky type, 240mm/80mm
  • Leather fingertip for woodcarvers
  • Wooden spoon blanks set (Linden)
5225p 5 500 p
Отзывов: 1
Рейтинг:
new

Spoon knife, PETROGRAD, type 1/22, left-handed

Ложкорез по дереву ПЕТРОГРАДЪ модель N1/22, это инструмент для резьбы деревянных ложек и других впуклых поверхностей. Основная задача ложкореза - выборка лунки в деревянной ложке (черпало). Выпускается двух видов: правый и левый. Производство фабрика Петроградъ (Россия)

3000p
Отзывов: 1
Рейтинг: