Categories
Description
Are you sure?
Find out a mismatch? Highlight text and press Share / Save Link:
Specs
Reviews
Instructions ()
Publications
Recommended products
Textile 6 pocket Tool Roll, PETROGRAD, for carving knives
This tool roll is designed to store short chisels and knives in an amount of up to 6 pieces. The bag is made of black cotton fabric. The maximum tool length is 180 mm. The length of the tool roll in expanded form -360mm. Compartment for chisels has a strap - to close the cutting part of the knives. Lacing is provided for fixing the twist bag. Made in Russia.
Popular goods
Sharpening set PETROGRAD N3, for knives, 3 stones
Sharpening set PETROGRAD N3.Water stones. Grain size: 150, 360, 500, 1000, 1500 and 2000. Size 15х15х120mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Used for sharpening and setting bevels.
High sharpening performance, second only to diamond, is ensured by the use of silicon carbide abrasive grains, which are notable for their sharpness and brittleness. The high hardness of carbide-silicon grinding materials allows you to confidently process not only carbon steels, but also hard alloys, which is impossible on stones made of electro-alumina powders. In addition to performance, it is worth noting the extraordinary tactile sensations when sharpening a tool. Stones quickly give a slurry and produce a very pleasant sound.
> Water stones PETROGRAD are distinguished by high performance and geometry in a state of delivery.
In the characteristic of a water stone are specified: the first letter - hardness (I, J - soft, K - average); Japanese grain size according to JIS R6001-1987 is 150 (80 microns), 360 (34 microns), 500 (24 microns), 1000 (12 microns), 2000 (6 microns) and C is silicon carbide.
| 150 | 360 | 500 | 1000 | 1500 | 2000 | |
| Sharpening set PETROGRAD N3 | + | + | + | |||
| Sharpening set PETROGRAD N4 | + | + | + | + | + | + |
Comparison of FEPA, JIS and GOST standards:
Dead blow wooden mallet, round, 450 g
Dead blow wooden mallet* with round shape. Mallets made by woodturning from solid wood with filling of metal balls (lead shot). Filling act as a weighting agent, and also reduce recoil upon impact. Mallet weight 450 gramm. Mallets made of beech wood and covered with tung oil. Round mallets used for working with mortise chisels and woodcarving chisels. It used when cutting joints and when carving large elements or sculptures (work from under the mallet).
Production of Petrograd toolworks. Made in Saint Petersburg Russia.
| diameter: | 65 mm |
|---|---|
| weight: | 450 gramm |
| material: | beech wood |
| filling: | lead shot |
| coating: | thung oil** |
*blow without bounce
**coating may change from batch to batch
Froe PETROGRAD, model Uglich 300мм
Froe is a special cleaving axe (cleaver) for green woodworking, bodging and spoon making. Long blade and perpendicularly handle make it easy to split wood along the grain. Thick blade back would be good to use with mallet or even log*. Froe axe also good for split logs for fireplace, stove or even for making wood shingles and wooden blanks for spoons.
- blade lenght - 265 mm
- blade thickness - 10 mm
- blade width - 60 mm
- blade steel - 65Г
- hand forged
- hardened to 59 HRc
- handle made of maple
- handle lenght - 480 mm
- weight - 1,5kg
Edge is lenticular sharpened. Froe "Uglich" by petrograd toolworks is perfect choice for making blanks for spoon making. Froe axe is hand forged and totally made in Saint-Petersburg Russia
| Weight: | 1.5 kg |
|---|---|
| Type: | Splitting axe |
| Steel: | ШХ15 |
| Handle material: | Maple* |
| Edge: | Straight |
| Edge width: | 60 mm |
| Blade lenght: | 265 mm |
| Handle lenght: | 480 mm |
*Not for use with steel percussion tools such as a hammer or sledgehammer. It is allowed to work with wooden and brass hammers or mallets.
**material of handles may changes from batch to batch.
Strop PETROGRAD, model 2, for carving tools, 200mm*70mm
The bar with glued leather is designed for finishing semi-circular chisels, drawknives, etc. One of the flat sides can also be used for fine-tuning of flat tools. The size of the bar is 200x70 mm. Min radius - 6.5mm, max. radius - 12mm. It can be used with polishing pastes. Material - ash, leather - reversal 2mm. Leather color may differ from the image on the site. Made in Russia.
Checkering tool complete N2-20, 60°
Checkering tool No2. Both sides with teeth. Used for the application of grooves and their deepening after application. One blade runs along the guideline, while the other marks the next groove. When moving to the next groove, the tool deepens it and again applies the next groove. Cutter 2 It is a combination of tools for expanding and deepening grooves. Beech handle. All the cutters are made of steel, underwent a process of hardening and processing, for long and reliable work.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
| Item code | Item | Cutting angle |
Teeth per inch |
| М00015687 | N2-16 | 60° | 16 |
| М00015638 | N2-16 | 90° | 16 |
| М00015688 | N2-18 | 60° | 18 |
| М00015669 | N2-18 | 90° | 18 |
| М00015689 | N2-20 | 60° | 20 |
| М00015662 | N2-20 | 90° | 20 |
| М00015690 | N2-22 | 60° | 22 |
| М00015637 | N2-22 | 90° | 22 |
| М00015691 | N2-24 | 60° | 24 |
| М00015676 | N2-24 | 90° | 24 |
Parquet mallet PETROGRAD, ring type, blue
Киянка для укладки паркета, ПЕТРОГРАДЪ, модель 2, синяя. Форма киянки предложена известным паркетным мастеров Ринатом Камаловым. С помощью такого инструмента происходит монтаж паркетного покрытия. Производство фабрика Петроградъ (Россия).
Масло камелии, KAPLEUM, Сандал, 60 мл.
Масло камелии, KAPLEUM, Сандал, 60 мл. Неформальная творческая группа GILDIA.PRO предлагает новый продукт, изготовленный на основе отлично зарекомендовавшего себя масла Камелии – KAPLEUM.
Set of PETROGRAD mini-chisels, 6 items, in wooden box
Набор мини-стамесок ПЕТРОГРАДЪ, 6 штук, от 0.7 до 3.0 мм, в деревянном боксе. Предназначены для моделизма. Инструменты выполнены в миниатюрном размере и имеют острые лезвия для тонкой и аккуратной работы. Производство Россия.
PETROGRAD carving knife designed by Igor Frolov for working in `Single knife carving technique` 100
Резаки ПЕТРОГРАДЪ, для работы в "технике одного резца" Игоря Фролова – это резчицкий инструмент, созданный по эскизам Игоря Фролова. Применяются для резьбы по дереву, выполнены из инструментальной стали и закалены до 61 HRc. Производство – фабрика Петроградъ (Россия).
Straight Gouge Rubankov, N5, 20mm, 100mm
Стамески для резьбы по дереву, ПЕТРОГРАДЪ, прямые N5 – это резчицкий инструмент профессионального уровня, предназначенный для резьбы по твердым и мягким породам древесины. Основа любого комплекта резчицкого инструмента – это прямые стамески. Прямые стамески подходит для множества задач от создания фигурных форм до подбора фона. Их можно использовать со скосом вниз или вверх для создания вогнутых или выпуклых поверхностей. Производство – фабрика Петроградъ (Россия).