Share / Save Link:

Cup Chuck D35mm for Woodturning Lathe M20х1.5mm, PETROGRAD



Rating : (1)
Shipping: worldwide

3710 p (57.06)

Description

Chuck diameter 35mm. Steel unhardened chuck for turning centers. A simple and reasonably safe chuck compared to a jaw chuck. Simple and reliable and compact. Allows you to work in close proximity to it. Thread М20х1.5mm. Parts are easily and securely fastened in the chuck, as the chuck has a small inner cone. It is also possible to work without a back center.

Made at the PETROGRAD joinery and carpentry tools factory.
Production (Russia)


abc checkFind out a mismatch? Highlight text and press Ctrl/Cmd + Enter

Share / Save Link:

Reviews

Recommended products

%

Faceplate 100mm for Woorturning Lathe M20х1.5mm, PETROGRAD

The faceplate is made of 20 mild steel for safety when turning. It is used for mounting open-type workpieces, products with a larger diameter or irregular shape. Coating with alkyd enamel.
NOT INTENDED FOR TURNING AND GRINDING (ON REVERSE). Also designed for STD-type lathes.

Thread M20 x 1.5mm, height of all faceplates 40mm.
Size ш100 mm circle of holes for fixing the workpiece

Production - factory of joinery and carpentry tools PETROGRAD.
Made in Russia.
5670p(57.06)
Отзывов: 1
>Рейтинг:

The book `Practical course of woodturning art` + Atlas of drawings, M. Netyksa

The book is about woodturning art as a separate craft that includes not only the work on the lathe. This book was a basic textbook on turning wood and bone throughout the first half of the twentieth century. Moscow 1910 / Reprint edition of St. Petersburg 2017. Format 145x215 mm, hard tissue binding, 440 pages. Also included is an album of drawings attached to the 1910 edition. The author is M. A. Netyksa, a member of the Scientific Department of the Society for the Distribution of Technical Knowledge.

Table of contents.

Division I. Machines, equipment and tools
Division II. Work techniques and special devices
Division III. Various materials in turning
Division IV. Adhesives, putties and surface grinding
Division V. Decoration and Surface Finishing Turning Works

3900p(57.06)
Отзывов: 1
>Рейтинг:
%

Magazine Master&Workshop 2021 № 1 (11)

This is a periodical magazine about woodworking, craftsmen and workshops, about the news of the carpentry world. The best masters share their knowledge and experience with everyone. Illustrated specialized full-color magazine.

1000p(57.06)
Отзывов: 1
>Рейтинг:
%

Lathe's tool rest PETROGRAD, S-type, arrm 330mm*D20mm, bar D15.8mm*105mm

Подручник для токарного станка S-образный, ПЕТРОГРАДЪ, 330мм удобен для точения чаш и тарелок. Материал - сталь. Диаметр стержня 15,8 мм. Идеально подходит для токарного станка имеющим диаметр стержня подручника 15,8.

Изготовлен на фабрике столярных и плотницких инструментов ПЕТРОГРАДЪ.
Производство (Россия)

7600p(57.06)
Отзывов: 1
>Рейтинг:

Textile 16 pocket Tool Roll, PETROGRAD, 370*330mm, for chisels

Tool roll. Size - 370x330mm, 16 pockets. It is intended for storage of tools: cutters, chisels, knives. The maximum tool length is 300mm. Made of thick fabric - Furniture FLOCK, stitched seams.

2210p
Отзывов: 1
Рейтинг:

Petrograd Shovel Gouge 50mm

Стамеска полукруглая плотницкая Тотьма, предназначена для изготовления и зачистки продольных пазов и профилей, например при изготовлении сруба. Так же подойдет для удаления коры и декорирования поверхности на больших площадях. Рекомендована к использованию плотникам. Производство фабрика Петроградъ
14200p
Отзывов: 1
Рейтинг:

Mallet PETROGRAD, round, D65mm*250mm, 300 g

Wooden mallet, round shape. Solid wood mallets made by woodturning. Mallet weight 300 gramm. Mallets made of beech wood and covered with tung oil. Round mallets used for working with mortise chisels and woodcarving chisels. It used when cutting joints and when carving large elements or sculptures (work from under the mallet).

Production of Petrograd toolworks. Made in Saint Petersburg Russia.

Mallet Specification:
diameter: 65 mm
weight: 300 gramm
material: beech wood
coating: thung oil*
*coating may change from batch to batch
980p
Отзывов: 1
Рейтинг:

Heavy Duty Corner Framing Chisel, PETROGRAD, model Yelnya, 540mm/300mm, 25mm*25mm (1`)

Forged corner carpenter chisel PETROGRAD 25*25 mm with a wooden handle are designed for hard work with wood. The blade is forged manually from steel ШХ15 (USA 52100, G52986, J19965; Germany 1.3505, 100Cr6, 102Cr6) and hardened to a hardness of 58-61 HRC. With the help of machining specified exact geometry. Designed for processing and cleaning the corners of deep grooves. The handles are made of ash and crimped with two stainless rings - one to prevent splitting wood near the handle, the second to harden the back of the bar when working with a mallet or hammer. A leather pad between the chisel and the grip allows you to dampen the blows. Available in 25 mm wide. Blade length 300 mm, total length 550 mm. The guarantee of 100% quality is a small hole on the back of the chisel - a trace from the diamond cone of the device for determining the hardness. This test passes every chisel.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

13900p
Отзывов: 1
Рейтинг:

Bent Gouge Rubankov, N7, 30mm

Bent Gouge Rubankov, N7, 30mm (1.8 inches)

Carving chisel "Rubankov" Bent Gouge N7, 30mm ( 1.8 inches ). Perfectly suits for volume carving and deep hollow carving. The width of the cutting edge is 30mm ( 1.8inches ). The total lenght of the gouge is 280mm (11.02inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 135mm (5.31inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.

Gouge is sharpened, honed and fully ready to work out of the box.
This model is for hand cutting and can be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )

5800p
Отзывов: 1
Рейтинг:

Checkering tool complete N3-20, 60°

Checkering tools from series N3, have two sides: the right side is smooth, used as a guide, the left - with teeth. All the cutters are made of steel, underwent a process of hardening and processing, for long and reliable work. The right blade is devoid of teeth, has a sharp and smooth shape, and exactly follows along the guide line. The left blade has teeth and cuts a new groove during the process of notching from right to left. Thus, it is possible to apply a notch, using the previous groove, as a guide. Beech handle. 

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

850p
Отзывов: 1
Рейтинг:

Bench Chisel, PETROGRAD, model Istra short, 50mm

Forged carpentry short chisels Istra with a straight cutting edge and a wooden handle, has designed for hard work. The basis for the manufacture of chisels Istra was taken the form of old Russian chisels from the old tools museum Rubankov, and also takes into account long-term experience in the development of professional carpentry and carpentry tools of other toolworks.

The blade has forged manually from steel ШХ15 (USA analog is 52100, G52986, J19965; Germany  analog of 1.3505, 100Cr6, 102Cr6) and hardened to 61-63HRC. Carpentry chisels are intended for timber framing for processing deep grooves in logs and timber as an indispensable tool for the construction of frame structures in the style of timber frame, post-and-beam half-timbered, fachwerkhaus, Log house.

  • Chisel blade fastened to the handle with a conical socket.
  • The thickness of the blade at the neck is 11 mm, the thickness in the area of the descent is 7 mm.
  • The handles are made of ash and crimped with a stainless ring to harden the butt when working with a mallet or hammer.
  • Available in widths of 19 mm, 25 mm, 38 mm, 40 mm and 50 mm ( see full catalogue).
  • Blade length 200-250 mm, full length 320 mm.
  • The wedge-shaped blade prevents jamming in the wood.

Carpentry chisels Istra are totally hand made at PETROGRAD toolworks of joinery and carpentry tools. Made in Saint-Petersburg Russia.

8600p
Отзывов: 1
Рейтинг:
%

Carving set PETROGRAD, N9

Set of 3 wood carving tools. Best choice for starting wood carving spoons. This set is all what you will need to star wood carving your first spoon. All blades a razor sharp and ready to cut out of the box.

The set N9 includes:
  • Carving knife PETROGRAD, Bogorodsky type, 155mm/40mm
  • Carving knife PETROGRAD, skew 40 deg, 165mm/35mm
  • Spoon knife ( hook knife ) model N1, D 27mm, right one
  • Wooden case for 3 wood carving knives
Wood carving knives was produced by Petrograd toolwork in Saint Petersburg Russia
8340p
Отзывов: 1
Рейтинг:
new

Carving set PETROGRAD, N10

Carving set PETROGRAD, N10
The set includes:
Carving chisel PETROGRAD, V-type, 60 degree
Carving gouge PETROGRAD, 3mm
Carving gouge PETROGRAD, 6mm
Carving gouge PETROGRAD, 8mm
Carving chisel PETROGRAD, 8mm
Textile 6 pocket Tool Roll, PETROGRAD, 360*260mm, for carving knives
Carving knife PETROGRAD, model Hatchet N1, skew, 27mm

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

13200p
Отзывов: 1
Рейтинг:

Shallow Hook Knife, PETROGRAD, type 3, left-handed

Hook knife is used for cutting out a hollow in a wooden spoon or scoop, as well as for other similar work. Shallow hook knife N3 has a water drop profile of blade. That's making it perfectly choose for cut wooden spoons bowl. The left version of knife is designed to work with the left hand towards yourself or right hand to outside.

  • Hook knife blade made from tool steel (9ХС) and hardened up to 58-60HRC.
  • All hook cutters are sharpened and ready to go.
  • The outerside of the hook is ring-shaped and perfectly polished. Thats allow you to cut wood cleanly and smoothly without scoring.
  • The handle of the hook knife is made of maple and coated with oil*.

The right version of hook knife is designed to work with the right hand towards yourself, the left version - with the left hand towards yourself.
Made by Petrograd toolworks in Saint-Petersburg Russia.

Hook knife specifications:
Blade width: 12 mm
Blade lenght: 75 mm
Steel: 9ХС
Shape: hook
Handle grip: left-handed
Handle lenght: 160 mm
Total lenght: 235 mm
Weight: 0,1 kg
*coating may change from batch to batch
3600p
Отзывов: 1
Рейтинг: