Поделиться / Сохранить себе ссылку:
Стамеска ПЕТРОГРАДЪ, серия Волга, дамаск, 15мм
- Москва: 1 шт.
Описание
Стамеска ПЕТРОГРАДЪ, серия Волга, дамаск, 15мм. Стамески выполнены из дамасской стали. Поковки выполнены из высокоуглеродистой стали, собранной в рисунок (макумэ/итамэ-хада), узор которого напоминает текстуру дерева. Отковы дамасска подготовлены кузнецом фабрики ПЕТРОГРАДЪ Виталием Олеговичем Лазаревым. Форма лезвия имеет боковые скосы для работы в труднодоступных местах, например при подрезке и подчитки шиповых соединений: ласточкин хвост, шип-проушина, впол дерева, сковородней и прочие. Производятся с различной шириной полотна от 6мм до 50мм. Толщина лезвия переменная и увеличивается от режущей кромки к рукояти. Производство фабрика Петроградъ (Россия).
- для подрезки
- для зачистки
- не для долбления (для долбления гнёзд исп. долота)
Полотно изготовлено из высокоуглеродистой стали и закалено до твердости 59-61HRc. Спинка столярной стамески или рабочая сторона выровнена на плоскошлифовальных станках.
- надежная высокоуглеродистая сталь
- крепкая режущая кромка
- эргономичная деревянная рукоять из бубинга
Стамески Волга производства фабрики Петроградъ заточены и готовы к работе. Заводской угол заточки 25 градусов, рекомендуется наведение микрофаски в 30 градусов на мелком абразиве выше 3000 грит.
Деревянная рукоять выполнена из твердых пород древесины, усилена латунным кольцом для силовой работы с полиуретановой киянкой.
- остро заточена
- возможна работа с киянкой
- транспортировочная защита воском
Полотна стамесок смазаны защитным инструментальным воском, перед работой воск необходимо стереть сухой тряпкой или бумажным полотенцем. При длительном хранении рекомендуется консервация воском Петроградъ.
Характеристики стамески:
- Угол заточки режущей кромки 30 градусов
- Угол наклона бокового скоса стамески варьируется в зависимости от ширины полотна и составляют 15, 35, 50 градусов.
- Полотно закалено до твердости 59-61HRc
- Ширина полотна 15 мм
- Общая длина - от 280 мм
- Длина рукояти с кольцом 130мм
- Длина лезвия 150 мм
- В комплекте индивидуальный чехол
После работы рекомендуется протирать полотно маслом Камелия для защиты от коррозии.
* Внимание! Этот ручной инструмент предназначен и заточен для работ по дереву. Для работы по другим материалам требуется переточка. Не для работы по металлу.
** Допускается небольшой изгиб полотна по оси стамески и небольшая седловатость перпендикулярно оси.
*** Производитель оставляет за собой право вносить изменения в изделие без предварительного уведомления потребителя. Изменения не влияют на работоспособность и технические характеристики инструмента. Размеры и цвет могут незначительно варьироваться в зависимости от партии выпуска.
Осторожно! Боковые грани клинков острые, о них можно порезаться!
Острота боковой грани клинка обусловлена тем, что при заточке сохраняется размер и геометрия режущей кромки.
Поделиться / Сохранить себе ссылку:
Характеристики
Отзывы
Файлы ()
Статьи
Рекомендуемые товары
Масло камелии, KAPLEUM, Апельсин, 300 мл.
Масло камелии, KAPLEUM, Апельсин, 300 мл. Неформальная творческая группа GILDIA.PRO предлагает новый продукт, изготовленный на основе отлично зарекомендовавшего себя масла Камелии – KAPLEUM.
Паста, PLAVVIUM, масло камелии с воском, отдушка - Апельсин, 150гр.
Паста, PLAVVIUM, масло камелии с воском, запах – Апельсин, 150гр – средство для ухода и хранения инструмента. Выполнено в виде пасты для удобства нанесения. Это специальная большая банка для мастерских. Производство Россия.
Масло камелии, KAPLEUM, Лаванда, 60 мл.
Масло камелии, KAPLEUM, Лаванда, 60 мл. Неформальная творческая группа GILDIA.PRO предлагает новый продукт, изготовленный на основе отлично зарекомендовавшего себя масла Камелии – KAPLEUM.
Популярные товары
Firmer gouge PETROGRAD 20mm
Special gouges with blackened blade, which tapers in hight. Forged blade is made of traditional Cr-Mn steel and is heat treated to 59 Hrc. Improved blade penetration into wood. Combination of the stained hornbeam handle, brass ferrule and improved griding of the blade creates unique design of the tool.
Sharpening stone PETROGRAD, 200*70*20mm, 500 grit
Water stone. 500 grit. Size 200*70*20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Used for sharpening and setting bevels.
High sharpening performance, second only to diamond, is ensured by the use of silicon carbide abrasive grains, which are notable for their sharpness and brittleness. The high hardness of carbide-silicon grinding materials allows you to confidently process not only carbon steels, but also hard alloys, which is impossible on stones made of electro-alumina powders. In addition to performance, it is worth noting the extraordinary tactile sensations when sharpening a tool. Stones quickly give a slurry and produce a very pleasant sound.
Water stones PETROGRAD are distinguished by high performance and geometry in a state of delivery.
In the characteristic of a water stone are specified: the first letter - hardness (I, J - soft, K - average); Japanese grain size according to JIS R6001-1987 is 150 (80 microns), 360 (34 microns), 500 (24 microns), 1000 (12 microns), 2000 (6 microns) and C is silicon carbide.
Comparison of FEPA, JIS and GOST standards:
Sharpening stone PETROGRAD, 200*70*20mm, 1000 grit
Water stone. 1000 grit. Size 200*70*20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Used for sharpening and setting bevels.
High sharpening performance, second only to diamond, is ensured by the use of silicon carbide abrasive grains, which are notable for their sharpness and brittleness. The high hardness of carbide-silicon grinding materials allows you to confidently process not only carbon steels, but also hard alloys, which is impossible on stones made of electro-alumina powders. In addition to performance, it is worth noting the extraordinary tactile sensations when sharpening a tool. Stones quickly give a slurry and produce a very pleasant sound.
Water stones PETROGRAD are distinguished by high performance and geometry in a state of delivery.
In the characteristic of a water stone are specified: the first letter - hardness (I, J - soft, K - average); Japanese grain size according to JIS R6001-1987 is 150 (80 microns), 360 (34 microns), 500 (24 microns), 1000 (12 microns), 2000 (6 microns) and C is silicon carbide.
Comparison of FEPA, JIS and GOST standards:
Carving knife PETROGRAD, Bogorodsky type, 200mm/60mm
Carving knives for general use, as well as for large material removal. Blade length 40mm or 60mm, rounded butt. A comfortable oval redwood handle is saturated with oil and covered with shellac. The length of the handle - 115mm. Excellent knife for both beginners and professionals. The 2.5 mm thick blade is made of high carbon steel hardened to 59-61 HRc. All the knives are sharpened and ready to go. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
Carving knife PETROGRAD, Finnish type, 200mm/60mm
Carving knife PETROGRAD, skew type, 40 degrees
Carving knives with a bevel angle of 30, 37, 40 degrees double-sided sharpening. Blade length - 40 mm, width 13 mm, straight butt. A comfortable maple oval handle is saturated with oil and covered with shellac. The length of the handle - 115 mm. Knife for a wide range of works:
- marquetry, intarsia, veneering
- leather crafts
- production of musical instruments
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
| Model | Code | Handle | Blade lenght | Blade width | Scew angle | Total lenght |
| Carving knife PETROGRAD, skew 30 deg, 155mm/40mm | M00013393 | maple | 35 | 23 | 30 | 145 |
| Carving knife PETROGRAD, skew 37 deg, 140mm/40mm | M00013990 | maple | 35 | 35 | 37 | 160 |
| Carving knife PETROGRAD, skew 40 deg, 145mm/40mm | M00014065 | sapele | 30 | 20 | 40 | 165 |
Cutting knife PETROGRAD, left-handed skew 20 deg,
Cutting knife PETROGRAD with a skew of 20 degrees. The knife jamb is one of the most versatile cutting tools used for marking, rough material removal, veneer dissolution and carving of decorative elements.
The blade thickness is about 2 mm. The blade is made of 65G steel (Germany 66Mn4, Ck67, USA 1066) hardened to 59-61 HRc. Comfortable maple rectangular handle with bevels soaked with oil. Knife jamb sharpened and ready to go. Sharpening angle 25 degrees. Knives with a slanting sharpening have a wide range of applications (carving, marking, working with cardboard, marquetry, intarsia, plywood, working with leather, producing musical instruments, modeling and in everyday life).
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
Sharpening stone PETROGRAD, 200*70*20mm, 4000 grit
Water stone. 2000 grit. Size 200*70*20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Used for sharpening and setting bevels.
High sharpening performance, second only to diamond, is ensured by the use of silicon carbide abrasive grains, which are notable for their sharpness and brittleness. The high hardness of carbide-silicon grinding materials allows you to confidently process not only carbon steels, but also hard alloys, which is impossible on stones made of electro-alumina powders. In addition to performance, it is worth noting the extraordinary tactile sensations when sharpening a tool. Stones quickly give a slurry and produce a very pleasant sound.
Water stones PETROGRAD are distinguished by high performance and geometry in a state of delivery.
In the characteristic of a water stone are specified: the first letter - hardness (I, J - soft, K - average); Japanese grain size according to JIS R6001-1987 is 150 (80 microns), 360 (34 microns), 500 (24 microns), 1000 (12 microns), 2000 (6 microns) and C is silicon carbide.
Comparison of FEPA, JIS and GOST standards:
Spoon Gouge Rubankov, N7, 18mm
Spoon Gouge Rubankov, N7, 18mm (0.7 inches)
Carving chisel "Rubankov" Spoon gouge N7, 18mm ( 0.7 inches ). Perfectly suits for volume carving and deep hollow carving. The width of the cutting edge is 18mm ( 0.7inches ). The total lenght of the gouge is 220mm ( 8.66inches ), the lenght of the handle is 125mm ( 4.92inches ). Made of alloy steel, hand forged and hardened to 58-60HRc. The comfortable and ergonomic oval handle is made of Sapelewood and coated with oil.
Gouge is sharpened to 22 degrees angle, honed and fully ready to work out of the box.
This model is only fo hand cutting, should not be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )
Sharpening stone PETROGRAD, 200*70*20mm, 2000 grit
Water stone. 2000 grit. Size 200*70*20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Used for sharpening and setting bevels.
High sharpening performance, second only to diamond, is ensured by the use of silicon carbide abrasive grains, which are notable for their sharpness and brittleness. The high hardness of carbide-silicon grinding materials allows you to confidently process not only carbon steels, but also hard alloys, which is impossible on stones made of electro-alumina powders. In addition to performance, it is worth noting the extraordinary tactile sensations when sharpening a tool. Stones quickly give a slurry and produce a very pleasant sound.
Water stones PETROGRAD are distinguished by high performance and geometry in a state of delivery.
In the characteristic of a water stone are specified: the first letter - hardness (I, J - soft, K - average); Japanese grain size according to JIS R6001-1987 is 150 (80 microns), 360 (34 microns), 500 (24 microns), 1000 (12 microns), 2000 (6 microns) and C is silicon carbide.
Comparison of FEPA, JIS and GOST standards: