Share / Save Link:
Description
Кожаная сумка RUBANKOV выпускается в трех размерах.
Модели 1, 49см имеет одинаковую конструкцию. Сумка на прочном и надежном подкладе из высококачественной кожи, ручки и плечевой ремень из этой же кожи, прошиты и проклепаны. Плечевой ремень на карабинах, регулируется по длине. Ручки огибают сумку вокруг, что позволяет выдерживать значительные нагрузки. Внутри матерчатый карман на боковой стенке. Сумки имеют два внешних кармана. Один боковой круглый карман на надежной металлической молнии, выполняют функцию дополнительного отделения сумки. Второй, небольшой, для мелких принадлежностей или документов, или авиабилетов. Эта модель сумки предназначена не только для инструмента, может использоваться как спортивная, походная, подходит для ручной клади в самолете. Удобная и практичная, надежная, очень вместительная. Такая сумка-батон подойдет в дорогу и для повседневной носки любителям габаритных аксессуаров. На лицевой части сумки вышит логотип компании RUBANKOV.
Share / Save Link:
Specs
Reviews
Instructions ()
Publications
Popular goods
Carving knife PETROGRAD, Bogorodsky type, 200mm/60mm
Carving knife PETROGRAD, Finnish type, 175mm/45mm
Sharpening set PETROGRAD N1, for woodworking tools, 3 stones
Water stones. Grain size: 150, 360, 500, 800, 1000, 1500 and 2000. Size 200x70x20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Made in Russia.
To select and order an abrasive stone of desired grain size, click on the name of the product.
Carving knife PETROGRAD, skew type, 40 degrees
Carving knives with a bevel angle of 30, 37, 40 degrees double-sided sharpening. Blade length - 40 mm, width 13 mm, straight butt. A comfortable maple oval handle is saturated with oil and covered with shellac. The length of the handle - 115 mm. Knife for a wide range of works. The 2.5 mm thick blade is made of 65G (Germany 66Mn4, Ck67, USA 1066) steel, hardened to 59-61 HRc. Sharpened and ready to go.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
Carving set PETROGRAD, N2
The set includes:
Carving knife PETROGRAD, Bogorodsky type, 155mm/40mm
Carving knife PETROGRAD, Finnish type, 175mm/60mm
Carving knife PETROGRAD, skew 30 deg, 155mm/40mm
Carving knife PETROGRAD, Swedish type, 175mm/60mm
Spoon knife, PETROGRAD, D 27mm, right-handed
Carving chisel, PETROGRAD, 10mm
Textile 6 pocket Tool Roll, PETROGRAD, 360*260mm, for carving knives
Bent Gouge Rubankov, N6, 20mm
Bent Gouge Rubankov, N6, 20mm (0.79 inches)
Carving chisel "Rubankov" Bent Gouge N6, 20mm ( 0.79 inches ). Perfectly suits for volume carving and deep hollow carving. The width of the cutting edge is 20mm ( 0.79inches ). The total lenght of the gouge is 425mm ( 16.73inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 280mm (11.02inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.
Gouge is sharpened, honed and fully ready to work out of the box.
This model is for hand cutting and can be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )
Checkering tool complete S-1, 90°
Checkering tool S-1 has 1 pyramidal tooth. Angle of the top is 90 degrees. The cutter has a convenient beech handle and a rod with a sharp bend perpendicular to the cutting axis and the working part installed on it. All the cutters are made of steel, undergone the process of hardening and processing, for long and reliable work.
It is V-shaped with teeth on both sides. Designed to handle corners and bends, as well as hard-to-reach places.
Pay attention to the high relief, providing fast and smooth cutting. The tines provide good removal of all hardwoods.
The cutter has not matter what cutting - deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Every element is smooth and beautiful.
The width of the working part is 5 mm, the length of the working part is 5 mm, the apex angle is 90 °
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
Carving chisel, PETROGRAD, V-type, 60 degrees
Carving chisel, PETROGRAD, V-type, 60 degrees. It is intended for carving of medium-sized parts and small-scale detailing, it can also be used as a marking tool for “Checking” (notch on the butts). Made in 65G (Germany 66Mn4, Ck67, USA 1066) forged steel. The handle is barrel-shaped, which allows you to securely and conveniently hold the chisel without tiring the wrist. Handle material - beech. Coating oil wax. The length of the handle - 140 mm, full length - 175 mm, width - 7 mm
Chisels are designed for both amateurs and professionals engaged in medium-sized products.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
Carving set PETROGRAD, N14
The set includes:
Carving knife PETROGRAD, Bogorodsky type, 155mm/40mm
Spoon knife, PETROGRAD, D 27mm, right-handed
Spoon knife, PETROGRAD, D 27mm, left-handed
Sharpening stone PETROGRAD, 120*15*15mm, 1000 grit
Textile 6 pocket Tool Roll, PETROGRAD, 360*260mm, for carving knives
Leather fingertip for woodcarvers
Leather fingertip is a thumb guard for wood carvers by Petrograd toolworks. Designed to protect hands from sharp tools. Thumb guard protects your finger from cut injuries when you are moving the cutting tool towards thumb, and prevents the formation of calluses when working away from yourself. Watch pictures for more info.
- made of 2mm leather
- easy to use
- save you from injures
Guard has a special ring that prevents it from slipping during operation. The thimble was made of 2mm soft leather, which provides good protection for the toe.
Thumb guard was made by Petrograd toolworks in Saint Petersburg Russia