Categories
Description
Сталь — ШХ15, полный цикл термообработки с зонной закалкой лезвия. Твердость режущей кромки около 58 HRC. РК около 70 мм.
Рукоять выполнена из ясеня и покрыта маслом.
Вес головы — около 600 грамм. Вес топора — около 800 грамм.
Общая длина — 400-450 мм.
Производитель имеет право без предварительного уведомления вносить изменения в изделие, которые не ухудшают его технические характеристики, а являются результатом работ по усовершенствованию его конструкции или технологии производства.
Are you sure?
Find out a mismatch? Highlight text and press Share / Save Link:
Specs
Reviews
Instructions ()
Publications
Recommended products
Leather bag RUBANKOV, type 1, 49cm
Кожаная сумка RUBANKOV выпускается в трех размерах.
Модели 1, 49см имеет одинаковую конструкцию. Сумка на прочном и надежном подкладе из высококачественной кожи, ручки и плечевой ремень из этой же кожи, прошиты и проклепаны. Плечевой ремень на карабинах, регулируется по длине. Ручки огибают сумку вокруг, что позволяет выдерживать значительные нагрузки.
Magazine Master&Workshop 2021 № 1 (11)
This is a periodical magazine about woodworking, craftsmen and workshops, about the news of the carpentry world. The best masters share their knowledge and experience with everyone. Illustrated specialized full-color magazine.
Carpenter Slick Chisel, PETROGRAD, model Onega, 60mm
Carpenters Slick chisel "Onega" by Petrograd toolworks is one of best choices for Timber Framing joinery. Slick Onega is a fine combination of weight, balance and splendid sharpening and flatness. All that will give you an extraodinary feeling wile working with our timber frame slicks.
- blade offset of handle
- blade width - 60 mm
- blade lenght - 300 mm
- blade made of ШХ15 steel (USA 52100, G52986, J19965; Germany 1.3505, 100Cr6, 102Cr6)
- hardened to 58-61HRc
The blade is hand forged and has off-set from the handle. This allows extra clearance when working on deep mortices or taking long paring cuts.
Made of ШХ15 steel our "Onega" slicks offer a perfect combination of hardness and toughness together with a razor sharp cutting edge.
The back side of blade (near handle) is rounded off to eliminate sharp corners giving extra comfort and security.
- rased up handle
- handle lenght 500 mm
- handle made of ash wood
- leather pad
All carpentr's slicks Onega comes with leather holster for edge protection. Every Blade is tested for hardness, sharp and ready to work.
This is a complete tool for timber frame joinery and othe heavy duty work.
- full lenght - 820 mm
- weight - 1.4 Kg
| Weight: | 1.4 kg |
|---|---|
| Type: | Timber Framing Slick |
| Steel: | ШХ15 |
| Handle material: | Ash* |
| Edge: | Straight |
| Edge width: | 60mm |
| Blade lenght: | 300 mm |
| Total lenght: | 820 mm |
*material of handles may changes from batch to batch.
Adze PETROGRAD, type N2, half round, inside bevel
Adze N2 created on the basis of a study of ancient tools, made in the northern regions of Russia and now stored in our Museum of Ancient Instruments.
Forged tempered to hardness - 58-60HRc. The adze is made of spring steel 65 g (Germany 66Mn4, Ck67, USA 1066). The width of the blade is 70 mm. Total length - 500 mm. Weight - 1.3 kg.
Totally hand made at PETROGRAD factory of joinery and carpentry tools.
Made in Russia
Popular goods
Sharpening set PETROGRAD N3, for knives, 3 stones
Sharpening set PETROGRAD N3.Water stones. Grain size: 150, 360, 500, 1000, 1500 and 2000. Size 15х15х120mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Used for sharpening and setting bevels.
High sharpening performance, second only to diamond, is ensured by the use of silicon carbide abrasive grains, which are notable for their sharpness and brittleness. The high hardness of carbide-silicon grinding materials allows you to confidently process not only carbon steels, but also hard alloys, which is impossible on stones made of electro-alumina powders. In addition to performance, it is worth noting the extraordinary tactile sensations when sharpening a tool. Stones quickly give a slurry and produce a very pleasant sound.
> Water stones PETROGRAD are distinguished by high performance and geometry in a state of delivery.
In the characteristic of a water stone are specified: the first letter - hardness (I, J - soft, K - average); Japanese grain size according to JIS R6001-1987 is 150 (80 microns), 360 (34 microns), 500 (24 microns), 1000 (12 microns), 2000 (6 microns) and C is silicon carbide.
| 150 | 360 | 500 | 1000 | 1500 | 2000 | |
| Sharpening set PETROGRAD N3 | + | + | + | |||
| Sharpening set PETROGRAD N4 | + | + | + | + | + | + |
Comparison of FEPA, JIS and GOST standards:
Dead blow wooden mallet, round, 450 g
Dead blow wooden mallet* with round shape. Mallets made by woodturning from solid wood with filling of metal balls (lead shot). Filling act as a weighting agent, and also reduce recoil upon impact. Mallet weight 450 gramm. Mallets made of beech wood and covered with tung oil. Round mallets used for working with mortise chisels and woodcarving chisels. It used when cutting joints and when carving large elements or sculptures (work from under the mallet).
Production of Petrograd toolworks. Made in Saint Petersburg Russia.
| diameter: | 65 mm |
|---|---|
| weight: | 450 gramm |
| material: | beech wood |
| filling: | lead shot |
| coating: | thung oil** |
*blow without bounce
**coating may change from batch to batch
Froe PETROGRAD, model Uglich 300мм
Froe is a special cleaving axe (cleaver) for green woodworking, bodging and spoon making. Long blade and perpendicularly handle make it easy to split wood along the grain. Thick blade back would be good to use with mallet or even log*. Froe axe also good for split logs for fireplace, stove or even for making wood shingles and wooden blanks for spoons.
- blade lenght - 265 mm
- blade thickness - 10 mm
- blade width - 60 mm
- blade steel - 65Г
- hand forged
- hardened to 59 HRc
- handle made of maple
- handle lenght - 480 mm
- weight - 1,5kg
Edge is lenticular sharpened. Froe "Uglich" by petrograd toolworks is perfect choice for making blanks for spoon making. Froe axe is hand forged and totally made in Saint-Petersburg Russia
| Weight: | 1.5 kg |
|---|---|
| Type: | Splitting axe |
| Steel: | ШХ15 |
| Handle material: | Maple* |
| Edge: | Straight |
| Edge width: | 60 mm |
| Blade lenght: | 265 mm |
| Handle lenght: | 480 mm |
*Not for use with steel percussion tools such as a hammer or sledgehammer. It is allowed to work with wooden and brass hammers or mallets.
**material of handles may changes from batch to batch.
Strop PETROGRAD, model 2, for carving tools, 200mm*70mm
The bar with glued leather is designed for finishing semi-circular chisels, drawknives, etc. One of the flat sides can also be used for fine-tuning of flat tools. The size of the bar is 200x70 mm. Min radius - 6.5mm, max. radius - 12mm. It can be used with polishing pastes. Material - ash, leather - reversal 2mm. Leather color may differ from the image on the site. Made in Russia.
Checkering tool complete N2-20, 60°
Checkering tool No2. Both sides with teeth. Used for the application of grooves and their deepening after application. One blade runs along the guideline, while the other marks the next groove. When moving to the next groove, the tool deepens it and again applies the next groove. Cutter 2 It is a combination of tools for expanding and deepening grooves. Beech handle. All the cutters are made of steel, underwent a process of hardening and processing, for long and reliable work.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
| Item code | Item | Cutting angle |
Teeth per inch |
| М00015687 | N2-16 | 60° | 16 |
| М00015638 | N2-16 | 90° | 16 |
| М00015688 | N2-18 | 60° | 18 |
| М00015669 | N2-18 | 90° | 18 |
| М00015689 | N2-20 | 60° | 20 |
| М00015662 | N2-20 | 90° | 20 |
| М00015690 | N2-22 | 60° | 22 |
| М00015637 | N2-22 | 90° | 22 |
| М00015691 | N2-24 | 60° | 24 |
| М00015676 | N2-24 | 90° | 24 |
Parquet mallet PETROGRAD, ring type, blue
Киянка для укладки паркета, ПЕТРОГРАДЪ, модель 2, синяя. Форма киянки предложена известным паркетным мастеров Ринатом Камаловым. С помощью такого инструмента происходит монтаж паркетного покрытия. Производство фабрика Петроградъ (Россия).
Масло камелии, KAPLEUM, Сандал, 60 мл.
Масло камелии, KAPLEUM, Сандал, 60 мл. Неформальная творческая группа GILDIA.PRO предлагает новый продукт, изготовленный на основе отлично зарекомендовавшего себя масла Камелии – KAPLEUM.
Set of PETROGRAD mini-chisels, 6 items, in wooden box
Набор мини-стамесок ПЕТРОГРАДЪ, 6 штук, от 0.7 до 3.0 мм, в деревянном боксе. Предназначены для моделизма. Инструменты выполнены в миниатюрном размере и имеют острые лезвия для тонкой и аккуратной работы. Производство Россия.
PETROGRAD carving knife designed by Igor Frolov for working in `Single knife carving technique` 100
Резаки ПЕТРОГРАДЪ, для работы в "технике одного резца" Игоря Фролова – это резчицкий инструмент, созданный по эскизам Игоря Фролова. Применяются для резьбы по дереву, выполнены из инструментальной стали и закалены до 61 HRc. Производство – фабрика Петроградъ (Россия).
Straight Gouge Rubankov, N5, 20mm, 100mm
Стамески для резьбы по дереву, ПЕТРОГРАДЪ, прямые N5 – это резчицкий инструмент профессионального уровня, предназначенный для резьбы по твердым и мягким породам древесины. Основа любого комплекта резчицкого инструмента – это прямые стамески. Прямые стамески подходит для множества задач от создания фигурных форм до подбора фона. Их можно использовать со скосом вниз или вверх для создания вогнутых или выпуклых поверхностей. Производство – фабрика Петроградъ (Россия).