Categories
Checkering tool complete JT, 90°
Checkering tool has 1 pyramidal tooth. Angle top 90 degrees. All the cutters are made of steel, undergone the process of hardening and processing, for long and reliable work.
It is V-shaped with teeth on both sides. Cutter JT is designed for the passage of long lines and correction of existing ones. Due to the length does not go with a given path for which he received the name jointer. The handle is made of beech, well balanced and lies comfortably in your hand.
Pay attention to the high relief, providing fast and smooth cutting. The teeth provide good removal of all hard wood. The cutter is just the same as cutting: deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Every element is smooth.
The width of the working part is 4 mm, the length of the working part is 32 mm, the apex angle is 90 degrees.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
Checkering tool veiner, 60°
Checkering tool veiner 60 degrees. Used to perform a notch without borders. All the cutters are made of steel, have been hardened and processed to serve you for a long time. The beech handle is well balanced and lies comfortably in your hand.
Designed specifically for making notches on the rifle boxes, this tool allows curved borders, heraldic lines and all kinds of decorative edging to be performed - an ideal tool for processing notches pyramids at the junction of borders.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
Chisel set PETROGRAD N10
Chisel set PETROGRAD N10:
Bench chisel PETROGRAD 6mm
Bench chisel PETROGRAD 10mm
Bench chisel PETROGRAD 20mm
Corner chisel PETROGRAD
Textile 16 pocket Tool Roll, PETROGRAD, 370*330mm, for chisels
Chisel set PETROGRAD N11
Chisel set PETROGRAD N11:
Bench chisel PETROGRAD 6mm
Bench chisel PETROGRAD 12mm
Skew chisel PETROGRAD, right-sided, 12mm
Skew chisel PETROGRAD, left-sided, 12mm
Textile 16 pocket Tool Roll, PETROGRAD, 370*330mm, for chisels
Chisel set PETROGRAD N12
Chisel set PETROGRAD N12:
Bench chisel PETROGRAD 6mm
Bench chisel PETROGRAD 12mm
Bench chisel PETROGRAD 20mm
Firmer gouge PETROGRAD 12mm
Textile 16 pocket Tool Roll, PETROGRAD, 370*330mm, for chisels
Chisel set PETROGRAD N13
Chisel set PETROGRAD N13:
Firmer gouge PETROGRAD 10mm
Bench chisel PETROGRAD 10mm
Bench chisel PETROGRAD 20mm
Skew chisel PETROGRAD, right-sided, 12mm
Skew chisel PETROGRAD, left-sided, 12mm
Corner chisel PETROGRAD
Textile 16 pocket Tool Roll, PETROGRAD, 370*330mm, for chisels
Chisel set PETROGRAD N14
Chisel set PETROGRAD N14
Bench chisel PETROGRAD 4mm
Bench chisel PETROGRAD 8mm
Bench chisel PETROGRAD 16mm
Skew chisel PETROGRAD, right-sided, 6mm
Corner chisel PETROGRAD
Skew chisel PETROGRAD, left-sided, 6mm
Textile 16 pocket Tool Roll, PETROGRAD, 370*330mm, for chisels
Chisel set PETROGRAD N15
Chisel set PETROGRAD N15:
Firmer gouge PETROGRAD 8mm
Firmer gouge PETROGRAD 6mm
Bench chisel PETROGRAD 6mm
Bench chisel PETROGRAD 12mm
Bench chisel PETROGRAD 26mm
Corner chisel PETROGRAD
Textile 16 pocket Tool Roll, PETROGRAD, 370*330mm, for chisels
Carving set PETROGRAD, N7, 12 knives
The set includes:
Carving chisel PETROGRAD, V-type, 60 degree
Carving gouge PETROGRAD, 3mm
Carving gouge PETROGRAD, 4mm
Carving gouge PETROGRAD, 6mm
Carving gouge PETROGRAD, 8mm
Carving gouge PETROGRAD, 10mm
Carving chisel PETROGRAD, 8mm
Carving knife PETROGRAD, model Hatchet N1, skew, 27mm
Carving knife PETROGRAD, model Hatchet N2, skew, 38mm
Carving knife PETROGRAD, model Hatchet N3, skew, 43mm
Carving knife PETROGRAD, model Hatchet N4, skew, 11mm
Carving knife PETROGRAD, model Hatchet N5, skew, 18mm
Textile 16 pocket Tool Roll, PETROGRAD, 370*330mm, for chisels
Leather 24 pocket Tool Roll, PETROGRAD
Leather tool roll PETROGRAD. The bag is made of a brown split is designed for storing and carrying carving and bench chisels with a handle diameter of not more than 35 mm and a total length of not more than 260 mm. The bag is equipped with ties for fixing the bag in a twisted state. Width 320 mm, total length in unfolded state 820 mm. The location of the pockets is two-sided. We recommend placing chisels in a bag with protective caps put on cutting edges.
The manufacturer reserves the right to make changes in the design of the bag that do not lead to deterioration of its qualities.
Made in Russia.
Textile 24 pocket Tool Roll, PETROGRAD, 530*330mm, for chisels
Textile tool roll.
Size - 530x330mm, 24 pockets.
It is intended for storage cutters, chisels, knives. The maximum tool length is 300mm. Made of tent fabric - 100% cotton, stitched seams. The color of the bag may differ depending on the lot.
In order to avoid slipping tools out of the bag, we recommend placing the chisels in the pockets of the bag with the handles inside. We also recommend placing the chisels in a bag with protective caps mounted on the cutting edges.
Made in Russia. The manufacturer reserves the right to make changes in the design of the bag that do not lead to deterioration of its qualities.
Textile tool holster for planes, PETROGRAD,400*220mm
Textile tool holster. The size is 400x220 mm. One compartment, tied to the braid. Designed for storing tools: planes, spokeshaves, scrapers, chisels, knives and axes. Made of tent fabric, 100% cotton. The color and shape of the product may differ from the specimen.
Made in Russia
Magazine Master&Workshop 2018 № 1
New magazine about woodworking 'Master and Workshop'
This is a regular magazine, telling about news from the woodworking world, about craftsmen and workshops.
Read in the first issue of the magazine:
The results of the bucksaw competition at the FSD 2018
Meeting blogger Mikhail Kuchuk (Heartwood) with subscribers at the school Rubankov.net
Master class "box with a secret"
Interview with Master Alexei Yuryevich Deykin
The story of the innovative jigsaws "Knew Concept"
Hegner Jigsaws - German quality Russian size
Historical excursion on the famous Hobbies jigsaws
Illustrated specialized magazine "Master and Workshop"
Circulation 3000 copies.
Periodicity 6 times a year.
Magazine Master&Workshop 2019 № 1 (3)
New magazine about woodworking 'Master and Workshop'
Read in the third issue of the magazine:
Woodworking show at MITEX 2018.
The Battle of woodturners at MITEX 2018
Rubric lessons from woodworker-blogger (Mini-grinder Merlin2) from Michael Kuchuk.
Saturday lesson from master Alexey Deykin.
Lie-Nielsen is synonymous with quality.
Masterpieces of plane making
Set of gouges for a beginner turner
Master class gifts defenders of the fatherland.
Museum of ancient instrument
Do it yourself- The story of one workbench
Illustrated specialized magazine "Master and Workshop"
Circulation 3000 copies.
Periodicity 6 times a year.
All issues of the magazine can be seen and ordered here.
Magazine Master&Workshop 2019 № 2 (4)
New magazine about woodworking 'Master and Workshop'
Read in the fourth issue of the journal:
DEVELOPMENTS
Conquest of "Igora" or the Rubankovsky landing - 2
COMPETITION
Competition for the best toolbox on FSD19
Woodturners battle on FSD19
MASTER CLASS
Learn to carving ... wooden dishes!
LESSONS OF WOODWORKER-BLOGGER MICHAIL KUCHUK
Router plane VERITAS
COVER FACE
Fedor Bondarev: “Marquetry without a carpentry is a candy wrapper without candy”
TOOLS AND EQUIPMENT
Checkering tools
DO IT YOURSELF
Dining table do it yourself
RESTORATION WORKS
Alexandra Argunova: “I don’t think that furniture from IKEA will survive the Soviet one”
MARKETRY FROM WOODSIMKA
Ludwig's Cubes: classics starts and wins (Author heading by Elena Simonova)
KLEIN SET
Author Sergey Klein
FEELS OF WOODWORKING
Classic woodworking as the basis of free movement
COURSES OF SKILL
Segmented woodturning - economical luxury
WOODTURNING
About turning gouges (Author Dmitry Pushin heading)
MASTERPIECES
Guitar Affairs Master
DO IT YOURSELF
Good spoon!
Happy Easter
MUSEUM
Masterpieces of the era of plane making (Part 2. Infill planes - planes with filling)
PLAYING
Wooden spin - a toy for all times
Illustrated specialized magazine "Master and Workshop"
Circulation 3000 copies.
Periodicity 6 times a year.
Carving knife PETROGRAD, model Hatchet N4, skew, 11mm
The model range consists of straight chisels with an expanding blade with a working part width of 11 mm, 18 mm, 27 mm, 38 mm, 43 mm. They have a wide range of applications for carving, are one of the main knives in geometric carving, and are also convenient and in demand using the Whittling carving technique. Chisels are made of steel 65G (Germany 66Mn4, Ck67, USA 1066) and have handles of maple, covered with tung oil. Sharpening angle - 20 degrees, blade thickness - 2 mm.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia
Carving chisel, PETROGRAD, V-type, 60 degrees
Carving chisel, PETROGRAD, V-type, 60 degrees. It is intended for carving of medium-sized parts and small-scale detailing, it can also be used as a marking tool for “Checking” (notch on the butts). Made in 65G (Germany 66Mn4, Ck67, USA 1066) forged steel. The handle is barrel-shaped, which allows you to securely and conveniently hold the chisel without tiring the wrist. Handle material - beech. Coating oil wax. The length of the handle - 140 mm, full length - 175 mm, width - 7 mm
Chisels are designed for both amateurs and professionals engaged in medium-sized products.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
Carving chisel, PETROGRAD, V-type, 90 degrees
Carving chisel, PETROGRAD, V-type, 60 degrees. It is intended for carving of medium-sized parts and small-scale detailing, it can also be used as a marking tool for Checking (notch on the butts). Made in 65G (Germany 66Mn4, Ck67, USA 1066) forged steel. The handle is barrel-shaped, which allows you to securely and conveniently hold the chisel without tiring the wrist. Handle material - beech. Coating oil wax. The length of the handle - 140 mm, full length - 175 mm, width - 7 mm
Chisels are designed for both amateurs and professionals engaged in medium-sized products.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
Carving chisel, PETROGRAD, half round, 10mm
Half round carving chisel PETROGRAD designed for threading medium-sized parts and for detailing small forms. Made of 65G (Germany 66Mn4, Ck67, USA 1066) forged steel. The beech handle is barrel-shaped, which makes it possible to securely and conveniently hold the chisel without tiring the wrist. Coating oil wax. The length of the handle - 140 mm, the total length - 175 mm, width - 10 mm.
Designed for both amateurs and professionals engaged in medium-sized products.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
Cutting knife PETROGRAD, left-handed skew 30 deg, 25mm/167mm
Cutting knife PETROGRAD with a skew of 30 degrees. The knife jamb is one of the most versatile cutting tools used for marking, rough material removal, veneer dissolution and carving of decorative elements.
The blade thickness is about 2 mm. The blade is made of 65G steel (Germany 66Mn4, Ck67, USA 1066) hardened to 59-61 HRc. Comfortable maple rectangular handle with bevels soaked with oil. Knife jamb sharpened and ready to go. Sharpening angle 25 degrees. Knives with a slanting sharpening have a wide range of applications (carving, marking, working with cardboard, marquetry, intarsia, plywood, working with leather, producing musical instruments, modeling and in everyday life).
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
Выведено из продажи
Popular goods
Textile 16 pocket Tool Roll, PETROGRAD, 370*330mm, for chisels
Tool roll. Size - 370x330mm, 16 pockets. It is intended for storage of tools: cutters, chisels, knives. The maximum tool length is 300mm. Made of thick fabric - Furniture FLOCK, stitched seams.
Petrograd Shovel Gouge 50mm
Mallet PETROGRAD, round, D65mm*250mm, 300 g
Wooden mallet, round shape. Solid wood mallets made by woodturning. Mallet weight 300 gramm. Mallets made of beech wood and covered with tung oil. Round mallets used for working with mortise chisels and woodcarving chisels. It used when cutting joints and when carving large elements or sculptures (work from under the mallet).
Production of Petrograd toolworks. Made in Saint Petersburg Russia.
| diameter: | 65 mm |
|---|---|
| weight: | 300 gramm |
| material: | beech wood |
| coating: | thung oil* |
Heavy Duty Corner Framing Chisel, PETROGRAD, model Yelnya, 540mm/300mm, 25mm*25mm (1`)
Forged corner carpenter chisel PETROGRAD 25*25 mm with a wooden handle are designed for hard work with wood. The blade is forged manually from steel ШХ15 (USA 52100, G52986, J19965; Germany 1.3505, 100Cr6, 102Cr6) and hardened to a hardness of 58-61 HRC. With the help of machining specified exact geometry. Designed for processing and cleaning the corners of deep grooves. The handles are made of ash and crimped with two stainless rings - one to prevent splitting wood near the handle, the second to harden the back of the bar when working with a mallet or hammer. A leather pad between the chisel and the grip allows you to dampen the blows. Available in 25 mm wide. Blade length 300 mm, total length 550 mm. The guarantee of 100% quality is a small hole on the back of the chisel - a trace from the diamond cone of the device for determining the hardness. This test passes every chisel.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
Bent Gouge Rubankov, N7, 30mm
Bent Gouge Rubankov, N7, 30mm (1.8 inches)
Carving chisel "Rubankov" Bent Gouge N7, 30mm ( 1.8 inches ). Perfectly suits for volume carving and deep hollow carving. The width of the cutting edge is 30mm ( 1.8inches ). The total lenght of the gouge is 280mm (11.02inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 135mm (5.31inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.
Gouge is sharpened, honed and fully ready to work out of the box.
This model is for hand cutting and can be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )
Checkering tool complete N3-20, 60°
Checkering tools from series N3, have two sides: the right side is smooth, used as a guide, the left - with teeth. All the cutters are made of steel, underwent a process of hardening and processing, for long and reliable work. The right blade is devoid of teeth, has a sharp and smooth shape, and exactly follows along the guide line. The left blade has teeth and cuts a new groove during the process of notching from right to left. Thus, it is possible to apply a notch, using the previous groove, as a guide. Beech handle.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
Carving set PETROGRAD, N9
The set N9 includes:
- Carving knife PETROGRAD, Bogorodsky type, 155mm/40mm
- Carving knife PETROGRAD, skew 40 deg, 165mm/35mm
- Spoon knife ( hook knife ) model N1, D 27mm, right one
- Wooden case for 3 wood carving knives
Carving set PETROGRAD, N10
The set includes:
Carving chisel PETROGRAD, V-type, 60 degree
Carving gouge PETROGRAD, 3mm
Carving gouge PETROGRAD, 6mm
Carving gouge PETROGRAD, 8mm
Carving chisel PETROGRAD, 8mm
Textile 6 pocket Tool Roll, PETROGRAD, 360*260mm, for carving knives
Carving knife PETROGRAD, model Hatchet N1, skew, 27mm
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
Carving set PETROGRAD, N11
The set includes:
Carving chisel PETROGRAD, V-type, 60 degree
Carving gouge PETROGRAD, 3mm
Carving gouge PETROGRAD, 6mm
Carving chisel PETROGRAD, 8mm
Textile 4 pocket Tool Roll, PETROGRAD, 360*200mm
Shallow Hook Knife, PETROGRAD, type 3, left-handed
Hook knife is used for cutting out a hollow in a wooden spoon or scoop, as well as for other similar work. Shallow hook knife N3 has a water drop profile of blade. That's making it perfectly choose for cut wooden spoons bowl. The left version of knife is designed to work with the left hand towards yourself or right hand to outside.
- Hook knife blade made from tool steel (9ХС) and hardened up to 58-60HRC.
- All hook cutters are sharpened and ready to go.
- The outerside of the hook is ring-shaped and perfectly polished. Thats allow you to cut wood cleanly and smoothly without scoring.
- The handle of the hook knife is made of maple and coated with oil*.
The right version of hook knife is designed to work with the right hand towards yourself, the left version - with the left hand towards yourself.
Made by Petrograd toolworks in Saint-Petersburg Russia.
| Blade width: | 12 mm |
|---|---|
| Blade lenght: | 75 mm |
| Steel: | 9ХС |
| Shape: | hook |
| Handle grip: | left-handed |
| Handle lenght: | 160 mm |
| Total lenght: | 235 mm |
| Weight: | 0,1 kg |