Marking knife PETROGRAD, model N1, skew form
Marking knife PETROGRAD, has a beveled shape.
In the model with a beveled blade, the blade is sharpened on the 1st edge, which makes it comfortable to use for right-handers.
One-sided sharpening. The blade is 2.3mm thick and is made of high carbon steel and hardened to 61HRC. The handle is made of wavy maple and impregnated with linseed oil. A convenient stop is made in front of the blade on the handle to prevent the hand from slipping. Handle length-160mm.
Production - factory of joinery and carpentry tools PETROGRAD.
Made in Russia
Marking knife PETROGRAD, model N1, arrow form
Marking knives PETROGRAD have a swept blade that is sharpened on 2 faces, which makes it comfortable to use both right-handed and left-handed. One-sided sharpening. The 2.3mm thick blade is made of high carbon steel and hardened to 61HRC. The handle is made of curly maple and saturated with linseed oil. Before the blade on the handle made a comfortable stop to prevent sliding of the hand. The length of the handle is 160mm.Totally hand made at PETROGRAD factory of joinery and carpentry tools.
Made in Russia
Marking knife PETROGRAD, model N2, left-handed skew 45 deg, 165mm/20mm
Marking knives PETROGRAD have a unilateral right or left sharpening and bevel at an angle of 30 and 45 degrees. The blade of the knife is made of high carbon steel and hardened to 59HRC, it passes through the entire handle - this allows you to use it not only as a marking knife, but also as a power knife jamb. Blade thickness - 1.7mm, width - 19mm. The lining is made of beech wood, covered with tung oil and fastened with brass rivets. The length of the knife is 165mm, the blade is 70mm.
Marking knife PETROGRAD, model N2, right-handed skew 45 deg, 165mm/20mm
Marking knives PETROGRAD have a unilateral right or left sharpening and bevel at an angle of 30 and 45 degrees. The blade of the knife is made of high carbon steel and hardened to 59HRC, it passes through the entire handle - this allows you to use it not only as a marking knife, but also as a power knife jamb. Blade thickness - 1.7mm, width - 19mm. The lining is made of beech wood, covered with tung oil and fastened with brass rivets. The length of the knife is 165mm, the blade is 70mm.
Shallow Hook Knife, PETROGRAD, type 2, D100mm, left-handed
Shallow Hook knife is used for cutting out a hollow in a wooden spoon or scoop, as well as for other similar work. Shallow hook knife N2 has a wide open water drop profile of blade. That's making it perfectly choose for cut wide wooden spoons bowl. The left version of knife is designed to work with the left hand towards yourself or right hand to outside.
- Knife blade width - 12mm.
- Spoon cutter length - 65 mm
- Handle length - 160 mm
- Total knife length - 225 mm
- Hook knife blade made from tool steel (ШХ15) and hardened up to 58-60HRC.
- All hook cutters are sharpened and ready to go.
- The outerside of the hook is ring-shaped and perfectly polished. Thats allow you to cut wood cleanly and smoothly without scoring.
- The handle of the hook knife is made of maple and coated with oil.
The right version of hook knife is designed to work with the right hand towards yourself, the left version - with the left hand towards yourself.
Made by Petrograd toolworks in Saint-Petersburg Russia.
*model N2 is deprecated, we recommend to view Hook knife model N3
Shallow Hook Knife, PETROGRAD, type 2, D100mm, right-handed
Shallow Hook knife is used for cutting out a hollow in a wooden spoon or scoop, as well as for other similar work. Shallow hook knife N2 has a wide open water drop profile of blade. That's making it perfectly choose for cut wide wooden spoons bowl. The right version of knife is designed to work with the right hand towards yourself or left hand to outside.
- Knife blade width - 12mm.
- Spoon cutter length - 65 mm
- Handle length - 160 mm
- Total knife length - 225 mm
- Hook knife blade made from tool steel (ШХ15) and hardened up to 58-60HRC.
- All hook cutters are sharpened and ready to go.
- The outerside of the hook is ring-shaped and perfectly polished. Thats allow you to cut wood cleanly and smoothly without scoring.
- The handle of the hook knife is made of maple and coated with oil.
The right version of hook knife is designed to work with the right hand towards yourself, the left version - with the left hand towards yourself.
Made by Petrograd toolworks in Saint-Petersburg Russia.
*model N2 is deprecated, we recommend to view Hook knife model N3
Производство ВСД
Ножи-косяки с углом скоса 30 градусов без рукояти. Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ. Длина лезвия указана в таблице, толщина клинка - около 2 мм. Лезвие выполнено из стали 65Г с закалкой до твердости 59-61 HRc. Заточен и готов к работе.
В настоящий момент идёт разработка дизайна модельного ряда резчицкого инструмента. Мы будем немного менять форму и размеры.
Сделано в России
Cutting knife PETROGRAD, left-handed skew 30 deg, 10mm/158mm, w/o handle
Ножи-косяки с углом скоса 30 градусов без рукояти. Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ. Длина лезвия указана в таблице, толщина клинка - около 2 мм. Лезвие выполнено из стали 65Г с закалкой до твердости 59-61 HRc. Заточен и готов к работе.
В настоящий момент идёт разработка дизайна модельного ряда резчицкого инструмента. Мы будем немного менять форму и размеры.
Сделано в России
Cutting knife PETROGRAD, right-handed skew 30 deg, 10mm/158mm, w/o handle
Ножи-косяки с углом скоса 30 градусов без рукояти. Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ. Длина лезвия указана в таблице, толщина клинка - около 2 мм. Лезвие выполнено из стали 65Г с закалкой до твердости 59-61 HRc. Заточен и готов к работе.
В настоящий момент идёт разработка дизайна модельного ряда резчицкого инструмента. Мы будем немного менять форму и размеры.
Сделано в России
Cutting knife PETROGRAD, double bevel, 30 deg, 10mm/158mm, w/o handle
Ножи-косяки с углом скоса 30 градусов без рукояти. Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ. Длина лезвия указана в таблице, толщина клинка - около 2 мм. Лезвие выполнено из стали 65Г с закалкой до твердости 59-61 HRc. Заточен и готов к работе.
В настоящий момент идёт разработка дизайна модельного ряда резчицкого инструмента. Мы будем немного менять форму и размеры.
Сделано в России
Cutting knife PETROGRAD, left-handed skew 30 deg, 16mm/167mm
Ножи-косяки с углом скоса 30 градусов. Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ. Длина лезвия указана в таблице, толщина клинка - около 2 мм. Лезвие выполнено из стали 65Г с закалкой до твердости 59-61 HRc. Заточен и готов к работе. Ножи с косой заточкой имеют широкий спектр применения (в резьбе, для разметки, при работы с картоном, моделировании и в повседневной жизни, в быту).
В настоящий момент идёт разработка дизайна модельного ряда резчицкого инструмента. Мы будем немного менять форму и размеры.
Сделано в России
Cutting knife PETROGRAD, right-handed skew 30 deg, 16mm/167mm
Ножи-косяки с углом скоса 30 градусов. Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ. Длина лезвия указана в таблице, толщина клинка - около 2 мм. Лезвие выполнено из стали 65Г с закалкой до твердости 59-61 HRc. Заточен и готов к работе. Ножи с косой заточкой имеют широкий спектр применения (в резьбе, для разметки, при работы с картоном, моделировании и в повседневной жизни, в быту). Нож комплектуется кожаным чехлом.
В настоящий момент идёт разработка дизайна модельного ряда резчицкого инструмента. Мы будем немного менять форму и размеры.
Сделано в России
Cutting knife PETROGRAD, universal skew 30 deg, 16mm/167mm
Ножи-косяки с углом скоса 30 градусов. Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ. Длина лезвия указана в таблице, толщина клинка - около 2 мм. Лезвие выполнено из стали 65Г с закалкой до твердости 59-61 HRc. Заточен и готов к работе. Ножи с косой заточкой имеют широкий спектр применения (в резьбе, для разметки, при работы с картоном, моделировании и в повседневной жизни, в быту). Нож комплектуется кожаным чехлом.
В настоящий момент идёт разработка дизайна модельного ряда резчицкого инструмента. Мы будем немного менять форму и размеры.
Сделано в России
Carving Knife, model Golubev
Силовой Нож-косяк с углом в плане 30 двухсторонняя заточка. Модель разработана мастером-реставратором Голубевым Г.В.Нож предназначен для выполнения силовой работы как одной рукой так и двумя. Длина лезвия - 105мм, ширина 40мм , прямой обух. Удобная овальная рукоять из красного дерева пропитана маслом и покрыта шеллаком. Полная длина ножа - 420мм. Нож для широкого спектра работ. Лезвие толщиной 4,0мм выполнено из высокоуглеродистой стали с закалкой до твердости 59-61 HRc. Заточен и готов к работе. Производство ПЕТРОГРАДЪ (Россия).
Barking shovel, N2, cambered (bell form), 110mm
Designed for the removal of thin or loose bark and other carpentry work. Also, this tool is widely known in the professional environment under such names as debarking shovel, Swedish shovel, Black forest shovel, Barking Spud.
The curved cutting edge allows you to control the width and cutting force. The hand-forged 6mm blade has a 30º angle and a hardness of 55-57HRC. Blade material - high carbon steel, cutting edge length - 110 mm. The 530 mm long handle is made of beech wood and impregnated with oil. Handle diameter 34 mm. For additional fastening, there are holes for fastening with screws or pins. Weight - 1 kg, total length 650 mm. The dimensions of the paddles per batch may vary slightly. Manufactured in Petrograd (Russia).
Barking shovel N5, cambered (bell form) with hook, 110mm
Straight scraper blade No. 5 with a curved edge (bell) is designed for removing thin or loose bark and other carpentry work, and an additional hook allows you to turn small workpieces. Also, this tool is widely known in the professional environment under such names as debarking shovel, Swedish shovel, Black forest shovel, Barking Spud.
Curved cutting edge allows control of width and cutting force. The hand-forged 6mm blade has a 30º angle and a hardness of 55-57HRC. Blade material - steel 65G, cutting edge length - 110mm. The 530mm long handle is made of beech wood and impregnated with oil. Handle diameter 34mm. For additional fastening, there are holes for fastening with screws or pins. Weight - 1kg, total length 650mm. The dimensions of the paddles in a batch may vary slightly. Manufactured in Petrograd (Russia).
All scraper blades are supplied with leather sheaths.
Scraper Blade N15 for woodturning tool
Replacement insert for Scraper turning tool, model N15. The cutter is made of 4 mm high carbon steel.
Size 16x32 mm. Suitable for CROWN REVOLUTION MINI, Brushed Turning Bits.
The replaceable plate was made at the PETROGRAD joinery and carpentry tools factory.
Production - (Russia)
Scraper Blade N17 for woodturning tool
Replacement insert for Scraper turning tool, model N17. The cutter is made of high carbon steel 4 mm thick. Size 24.5x40 mm. Fits CROWN REVOLUTION MINI, Brushed Turning Bits
The replaceable plate was made at the PETROGRAD joinery and carpentry tools factory.
Production - (Russia)
Set of Magazines Master&Workshop №№ 1-10
Selection of magazines "Master and Workshop" 1-10. Magazine "MASTER AND WORKSHOP"! A set of 10 numbers. It was conceived and dedicated to people who love or want to learn how to craft with their own hands. This is a periodical magazine about woodworking, craftsmen and workshops, about the news of the carpentry world. The best masters share their knowledge and experience with everyone. The illustrated specialized magazine will be of interest to both beginners and professionals in their field.
Frequency 6 times a year.
Wheel marking gauge Petrograd, type 2
- Measurement range 0-180 mm.
- The rod is 235 mm long and is made of hardened steel.
- Steel rod diameter 7mm.
- The stop is made of stainless steel with a diameter of 59 mm.
- Microadjustment mechanism with a convenient adjusting wheel.
- Micro-adjustment range up to 7 mm.
- One revolution of the micro-adjustment wheel is 0.5 mm
Out of order
Popular goods
carpentry Awl, 165mm, twisted blade 80*5*5mm, PETROGRAD
Carpentry power awl has a twisted square blade profile that allows you to mark the center of the holes and do not stray under the influence of wood fibers.
- The blade is made of carbon steel and hardened in oil to HRC 55-60
- Awl blade length is 80mm, the cross section is 5mm x 5mm
- The shape of the handle allows you to abut the whole palm, compressed by a brass ring
- Handle material - maple, impregnated with linseed oil
- Full length 165mm
Carpentrs awl are produced at Petrograd toolworks. Made in Saint Petersburg Russia
Carving adze PETROGRAD, type N1, half round, external bevel
Wood carving adze by PETROGRAD toolworks.
This adze was developed taking into account the wishes of artisans, as well as our experience in creating carpentry and carving tools. The carving adze is intended for chiseling the internal cavity when creating dishes (trough, broths, cups, bowls, plates, etc.), as well as for roughing the outer surfaces. Scope due to the size of adze.
Developed and designed carving adze - V. Sasin.
The ergonomic handle allows you to securely hold the tool during operation. Expansion at the end of the handle prevents slipping from the hand. The adze handle made of maple and covered with oil. Maple - one of the best wood for the manufacture of handles.
Hand forged blade from steel 65G (Germany 66Mn4, Ck67, USA 1066). Together with the handle has a mass of about 750 grams. Cutting edge sharpening angle - 30 degrees. The width of the working part - 40mm. Cutting edge bending radius - 20mm. If to speak it is applicable to the carving tool - it is 9 profile.
The eye has a wedge shape. The adze handle slides and splits into 3 wedges.
Sharpening the cutting edge - chamfer outside. It is preferable to use this adze at the finishing stages, for stripping, for smooth formation of the transition from the vertical wall to the flat bottom.
Any carving adze can be used from the beginning to the end. With experience comes the understanding that all three models must be in the arsenal.
Totally hand made at PETROGRAD factory of joinery and carpentry tools.
Made in Russia.
Sharpening stone PETROGRAD, 200*70*20mm, 4000 grit
Water stones. Grain size: 150, 360, 500, 1000, 1500, 2000 and 4000 grit. Size 200*70*20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Made in Russia.
Outdoor axe PETROGRAD, model Roslavl X, curved handle
Топор кованый ПЕТРОГРАДЪ, Рославль X, изогнутая рукоять. Топор Рославль Х отличается эффектной удлиненной формой полотна. Благодаря такой форме оголова топор можно брать хватом близким к полотну и не бояться повредить руку при работе. Изогнутая рукоять позволяет обеспечивает надежный захват. Плотницкий топор удобен при тёске и ошкуривании бревен. Также топор Рославль X отлично сбалансирован и подойдет для огромного вида работ, как походный топор, для не больших плотницких и столярных работ и просто как универсальный топор.
Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ.
Сделано в России.
Outdoor axe PETROGRAD, model Roslavl VII, handle n11
Hand forged outdoor axe Roslavl VII with curved handle.
- Total lenght is 370mm ( 14,57inch )
- Height of axe is 140mm ( 5,51inch )
- Lenght of cutting edge is 120mm ( 4,72inch )
- Axe is hand forged from 65G steel (Germany 66Mn4, Ck67, USA 1066).
- Curved cutting edge was straight sharpened.
- Total weight of axe is 0,7kg ( ± 0,05kg )
- Handle lenght is 320mm ( 12,6inch) and it is made from solid mapple with right grain position.
- The axe comes with leather case for protecting cutting edge.
Axe is well balanced and would be a good choice for a lot types of work. It will be great as outdoor axe, for small carpentry and othe woodwork projects. This is kind of universal axe for everyone.
Axe Roslavl VII produced by Petrograd toolworks in Saint Petersburg Russia.
Sharpening stone PETROGRAD, 200*70*20mm, 360 grit
Abrasive water stones. Grit: 150, 360, 500, 800, 1000,1500, 2000 and 4000 grit. Size 200x70x20mm. The abrasive grain is silicon carbide. Bond - ceramics. Hardness I ensures minimal wear of the stone during work. Steel does not overheat when sharpening. Does not require oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Manufactured in Russia.
Spoon Gouge Rubankov, N5, 10mm
Резчицкая стамеска Rubankov клюкарза N5, 10мм. Резчицкая стамеска предназначена для резьбы по дереву. Клюкарза используется для выполнения глубокой барельефной резьбы. Также удачно подходит для выборки углублений при резьбе посуды, кукс, ложек и декорировании деревянной поверхности.
Эта модель НЕ ЯВЛЯЕТСЯ УДАРНОЙ, ей не работают в паре с киянкой.
Изготовлена на фабрике столярных и плотницких инструментов "ПЕТРОГРАДЪ". Россия
Marking knife PETROGRAD, model N5, arrow form
Marking knives PETROGRAD have a swept blade that is sharpened on 2 faces, which makes it comfortable to use both right-handed and left-handed. One-sided sharpening. The 2.3mm thick blade is made of high carbon steel and hardened to 58-61HRC. The handle is made of curly maple and saturated with linseed oil. Before the blade on the handle made a comfortable stop to prevent sliding of the hand. The length of the handle is 170mm.Totally hand made at PETROGRAD factory of joinery and carpentry tools.
Made in Russia
Edge guard for carpenter's chisel 60mm
Production - factory of joinery and carpentry tools PETROGRAD.
Made in Russia.
Straight Gouge Rubankov, N3, 16mm
Straight Gouge Rubankov, N3, 16mm (0.63 inches)
Carving chisel "Rubankov" Straight Gouge N7, 16mm (0.63 inches). This is universal chisel that perfectly suits for carving hard and soft wood. The width of the cutting edge is 16mm ( 0.63inches ). The total lenght of the gouge is 280mm (11.02inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 135mm (5.31inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.
Gouge is sharpened, honed and fully ready to work out of the box.
This model is for hand cutting and can be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )