%

Carving set PETROGRAD, N1, 6 chisels

Carving chisels
The model range includes skewed chisels with a bevel angle of 45 degrees and a blade width of 12 mm.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

5040p(77.52) out of stock
Отзывов: 1
Рейтинг :
%

Carving set PETROGRAD, N3

The set includes
Chisel for carving, PETROGRAD, angular cutting edge 60 degrees
Chisel for carving, PETROGRAD, semicircular cutting edge, 10mm
Chisel for carving, PETROGRAD, semicircular cutting edge, 6mm
Chisel for carving, PETROGRAD, straight cutting edge, 8mm
Chisel for carving, PETROGRAD, oblique cutting edge, 12mm, left

Sharpening stone PETROGRAD, 120*15*15mm, 1000 grit
Textile 6 pocket Tool Roll, PETROGRAD, 360*260mm, for carving knives

The tools are made of steel 65G (Germany 66Mn4, Ck67, USA 1066) and have handles made of beech and maple covered with tung oil.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

5180p(79.67) out of stock
Отзывов: 1
Рейтинг :

Set of bench chisels , in tool roll, 4 pcs (8,10,16,32 mm)

Set of bench chisels PETROGRAD. The length of the blade - from 120mm to 160mm; width - 8mm, 10mm, 16mm, 32mm. Overall length - from 250mm to 295mm.These chisels have a classic design with blades that are bevel-edged to a narrow land on each side, providing excellent clearance when trimming into an angled corner such as in dovetail work, as well as reducing sidewall friction when working in a tight recess. Chisels are made focusing on the experience of old masters of woodworking. The blade is made of high-alloyed chrome-manganese steel and hardened to 60HRc. Comfortable hornbeam handle. The handle at the junction with the blade reinforced brass ring with leather gasket. 

6880p(105.81) out of stock
Отзывов: 1
Рейтинг :

Set of bench chisels, in tool roll, 6 pcs (6,8,10,12,20,32 mm)

Set of bench chisels PETROGRAD. The length of the blade - from 120mm to 160mm; width - 6mm, 8mm, 10mm, 12mm, 20mm, 32mm. Overall length - from 250mm to 295mm.These chisels have a classic design with blades that are bevel-edged to a narrow land on each side, providing excellent clearance when trimming into an angled corner such as in dovetail work, as well as reducing sidewall friction when working in a tight recess. Chisels are made focusing on the experience of old masters of woodworking. The blade is made of high-alloyed chrome-manganese steel and hardened to 60HRc. Comfortable hornbeam handle. The handle at the junction with the blade reinforced brass ring with leather gasket. 

9700p(149.19) out of stock
Отзывов: 1
Рейтинг :

Set of bench chisels, in tool roll, 10 pcs (6,8,10,12,16,20,26,32,40,50mm)

Set of bench chisels PETROGRAD. The length of the blade - from 120mm to 160mm; width - 6mm, 8mm, 10mm,12mm, 16mm, 20mm, 26mm, 32mm, 40mm, 50mm. Overall length - from 250mm to 295mm.These chisels have a classic design with blades that are bevel-edged to a narrow land on each side, providing excellent clearance when trimming into an angled corner such as in dovetail work, as well as reducing sidewall friction when working in a tight recess. Chisels are made focusing on the experience of old masters of woodworking. The blade is made of high-alloyed chrome-manganese steel and hardened to 60HRc. Comfortable hornbeam handle. The handle at the junction with the blade reinforced brass ring with leather gasket. 

17920p(275.61) out of stock
Отзывов: 1
Рейтинг :

Set of butt chisels PETROGRAD, in tool roll, 4 pcs (6,16,20,26 mm)

Set of butt chisels PETROGRAD, in tool roll, 4 pcs (6,16,20,26 mm). Short chisels PETROGRAD are ideal for precision work, for example in the manufacture of finger joints. Blade length - 95mm; width - 6mm, 12mm, 20mm, 26mm,. Total length - from 200mm. Chisels are specially made focusing on the experience of old masters of carpentry. The blade is made of high-alloy chrome-manganese tool steel and hardened to 60HRc. The edges of the web are chamfered towards the edges, but at the same time the edges of the web have a constant thickness. This design allows you to work comfortably in hard to reach places and especially with dovetail connections. The handle is made of hornbeam wood, the size of the handle is 105x30mm. Uncoated handle - the craftsman chooses the finish himself. The handle at the junction with the blade is reinforced with a brass ring with a leather pad There is also a set of chisels in a twist bag

5700p(87.67) out of stock
Отзывов: 1
Рейтинг :

Marking knife PETROGRAD, model N1, skew form

Marking knife PETROGRAD, has a beveled shape.
In the model with a beveled blade, the blade is sharpened on the 1st edge, which makes it comfortable to use for right-handers.

One-sided sharpening. The blade is 2.3mm thick and is made of high carbon steel and hardened to 61HRC. The handle is made of wavy maple and impregnated with linseed oil. A convenient stop is made in front of the blade on the handle to prevent the hand from slipping. Handle length-160mm.

Production - factory of joinery and carpentry tools PETROGRAD.
Made in Russia

1100p(16.92) out of stock
Отзывов: 1
Рейтинг :

Marking knife PETROGRAD, model N1, arrow form

Marking knives  PETROGRAD have a swept blade that is sharpened on 2 faces, which makes it comfortable to use both right-handed and left-handed. One-sided sharpening. The 2.3mm thick blade is made of high carbon steel and hardened to 61HRC. The handle is made of curly maple and saturated with linseed oil. Before the blade on the handle made a comfortable stop to prevent sliding of the hand. The length of the handle is 160mm.Totally hand made at PETROGRAD factory of joinery and carpentry tools.
Made in Russia

1100p(16.92) out of stock
Отзывов: 1
Рейтинг :

Marking knife PETROGRAD, model N2, left-handed skew 45 deg, 165mm/20mm

Marking knives PETROGRAD have a unilateral right or left sharpening and bevel at an angle of 30 and 45 degrees. The blade of the knife is made of high carbon steel and hardened to 59HRC, it passes through the entire handle - this allows you to use it not only as a marking knife, but also as a power knife jamb. Blade thickness - 1.7mm, width - 19mm. The lining is made of beech wood, covered with tung oil and fastened with brass rivets. The length of the knife is 165mm, the blade is 70mm.

1000p(15.38) out of stock
Отзывов: 1
Рейтинг :

Marking knife PETROGRAD, model N2, right-handed skew 45 deg, 165mm/20mm

Marking knives PETROGRAD have a unilateral right or left sharpening and bevel at an angle of 30 and 45 degrees. The blade of the knife is made of high carbon steel and hardened to 59HRC, it passes through the entire handle - this allows you to use it not only as a marking knife, but also as a power knife jamb. Blade thickness - 1.7mm, width - 19mm. The lining is made of beech wood, covered with tung oil and fastened with brass rivets. The length of the knife is 165mm, the blade is 70mm.

1000p(15.38) out of stock
Отзывов: 1
Рейтинг :

Shallow Hook Knife, PETROGRAD, type 2, D100mm, left-handed

Shallow Hook knife is used for cutting out a hollow in a wooden spoon or scoop, as well as for other similar work. Shallow hook knife N2 has a wide open water drop profile of blade. That's making it perfectly choose for cut wide wooden spoons bowl. The left version of knife is designed to work with the left hand towards yourself or right hand to outside.

  • Knife blade width - 12mm.
  • Spoon cutter length - 65 mm
  • Handle length - 160 mm
  • Total knife length - 225 mm
  • Hook knife blade made from tool steel (ШХ15) and hardened up to 58-60HRC.
  • All hook cutters are sharpened and ready to go.
  • The outerside of the hook is ring-shaped and perfectly polished. Thats allow you to cut wood cleanly and smoothly without scoring.
  • The handle of the hook knife is made of maple and coated with oil.

The right version of hook knife is designed to work with the right hand towards yourself, the left version - with the left hand towards yourself.
Made by Petrograd toolworks in Saint-Petersburg Russia.

*model N2 is deprecated, we recommend to view Hook knife model N3

2700p(41.53)
Отзывов: 1
Рейтинг :

Shallow Hook Knife, PETROGRAD, type 2, D100mm, right-handed

Shallow Hook knife is used for cutting out a hollow in a wooden spoon or scoop, as well as for other similar work. Shallow hook knife N2 has a wide open water drop profile of blade. That's making it perfectly choose for cut wide wooden spoons bowl. The right version of knife is designed to work with the right hand towards yourself or left hand to outside.

  • Knife blade width - 12mm.
  • Spoon cutter length - 65 mm
  • Handle length - 160 mm
  • Total knife length - 225 mm
  • Hook knife blade made from tool steel (ШХ15) and hardened up to 58-60HRC.
  • All hook cutters are sharpened and ready to go.
  • The outerside of the hook is ring-shaped and perfectly polished. Thats allow you to cut wood cleanly and smoothly without scoring.
  • The handle of the hook knife is made of maple and coated with oil.

The right version of hook knife is designed to work with the right hand towards yourself, the left version - with the left hand towards yourself.
Made by Petrograd toolworks in Saint-Petersburg Russia.

*model N2 is deprecated, we recommend to view Hook knife model N3

2700p(41.53)
Отзывов: 1
Рейтинг :

Производство ВСД

Ножи-косяки с углом скоса 30 градусов без рукояти. Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ. Длина лезвия указана в таблице, толщина клинка - около 2 мм. Лезвие  выполнено из стали 65Г с закалкой до твердости 59-61 HRc. Заточен и готов к работе. 

В настоящий момент идёт разработка дизайна модельного ряда резчицкого инструмента. Мы будем немного менять форму и размеры. 

Сделано в России

320p(4.92) out of stock
Отзывов: 1
Рейтинг :

Cutting knife PETROGRAD, left-handed skew 30 deg, 10mm/158mm, w/o handle

Ножи-косяки с углом скоса 30 градусов без рукояти. Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ. Длина лезвия указана в таблице, толщина клинка - около 2 мм. Лезвие  выполнено из стали 65Г с закалкой до твердости 59-61 HRc. Заточен и готов к работе. 

В настоящий момент идёт разработка дизайна модельного ряда резчицкого инструмента. Мы будем немного менять форму и размеры. 

Сделано в России

420p(6.46) out of stock
Отзывов: 1
Рейтинг :

Cutting knife PETROGRAD, right-handed skew 30 deg, 10mm/158mm, w/o handle

Ножи-косяки с углом скоса 30 градусов без рукояти. Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ. Длина лезвия указана в таблице, толщина клинка - около 2 мм. Лезвие  выполнено из стали 65Г с закалкой до твердости 59-61 HRc. Заточен и готов к работе. 

В настоящий момент идёт разработка дизайна модельного ряда резчицкого инструмента. Мы будем немного менять форму и размеры. 

Сделано в России

420p(6.46) out of stock
Отзывов: 1
Рейтинг :

Cutting knife PETROGRAD, double bevel, 30 deg, 10mm/158mm, w/o handle

Ножи-косяки с углом скоса 30 градусов без рукояти. Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ. Длина лезвия указана в таблице, толщина клинка - около 2 мм. Лезвие  выполнено из стали 65Г с закалкой до твердости 59-61 HRc. Заточен и готов к работе. 

В настоящий момент идёт разработка дизайна модельного ряда резчицкого инструмента. Мы будем немного менять форму и размеры. 

Сделано в России

700p(10.77)
Отзывов: 1
Рейтинг :
%

Cutting knife PETROGRAD, left-handed skew 30 deg, 16mm/167mm

Ножи-косяки с углом скоса 30 градусов. Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ. Длина лезвия указана в таблице, толщина клинка - около 2 мм. Лезвие  выполнено из стали 65Г с закалкой до твердости 59-61 HRc. Заточен и готов к работе. Ножи с косой заточкой имеют широкий спектр применения (в резьбе, для разметки, при работы с картоном, моделировании и в повседневной жизни, в быту).

В настоящий момент идёт разработка дизайна модельного ряда резчицкого инструмента. Мы будем немного менять форму и размеры. 

Сделано в России

840p(12.92) out of stock
Отзывов: 1
Рейтинг :

Cutting knife PETROGRAD, right-handed skew 30 deg, 16mm/167mm

Ножи-косяки с углом скоса 30 градусов. Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ. Длина лезвия указана в таблице, толщина клинка - около 2 мм. Лезвие  выполнено из стали 65Г с закалкой до твердости 59-61 HRc. Заточен и готов к работе. Ножи с косой заточкой имеют широкий спектр применения (в резьбе, для разметки, при работы с картоном, моделировании и в повседневной жизни, в быту). Нож комплектуется кожаным чехлом.

В настоящий момент идёт разработка дизайна модельного ряда резчицкого инструмента. Мы будем немного менять форму и размеры. 

Сделано в России

840p(12.92) out of stock
Отзывов: 1
Рейтинг :
%

Cutting knife PETROGRAD, universal skew 30 deg, 16mm/167mm

Ножи-косяки с углом скоса 30 градусов. Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ. Длина лезвия указана в таблице, толщина клинка - около 2 мм. Лезвие  выполнено из стали 65Г с закалкой до твердости 59-61 HRc. Заточен и готов к работе. Ножи с косой заточкой имеют широкий спектр применения (в резьбе, для разметки, при работы с картоном, моделировании и в повседневной жизни, в быту). Нож комплектуется кожаным чехлом.

В настоящий момент идёт разработка дизайна модельного ряда резчицкого инструмента. Мы будем немного менять форму и размеры. 

Сделано в России

840p(12.92) out of stock
Отзывов: 1
Рейтинг :

Carving Knife, model Golubev

Силовой Нож-косяк с углом в плане 30  двухсторонняя заточка.  Модель разработана мастером-реставратором Голубевым Г.В.Нож предназначен для выполнения силовой работы как одной рукой так и двумя. Длина лезвия -  105мм, ширина 40мм , прямой обух. Удобная овальная рукоять из красного дерева пропитана маслом и покрыта шеллаком. Полная длина ножа - 420мм. Нож для широкого спектра работ. Лезвие толщиной 4,0мм выполнено из высокоуглеродистой стали с закалкой до твердости 59-61 HRc. Заточен и готов к работе. Производство ПЕТРОГРАДЪ (Россия).

2400p(36.91) out of stock
Отзывов: 1
Рейтинг :

Out of order

Carpenter drawknife PETROGRAD N11, u-shaped, with raised arms, 170mm

A flat drawknife with curved and perpendicular cutting edge with handles will be convenient for various operations both in woodworking and carpentry: precise fit of logs in size, manufacture of seats, quick material removal in joinery, etc. Handles are raised above the blade plane and allow work closely to the treated surface. The blade is forged manually from tool steel 65G (Germany 66Mn4, Ck67, USA 1066) and hardened to 55-58 HRC. Sharpening - chamfering up. Handles 140 mm long are made of beech and impregnated with oil. Blade length - 170 mm, width 36 mm. Blade thickness - 6 mm, sharpening angle - 30 degrees. Comes in a leather case with a clasp on the buttons. The design of the drawknives, as well as their sharpening, is recommended by the Russian Carpenters Union for debarking and carpentry work on fitting logs. Other kinds of carpentry work may require regrinding.Blade was fully hardened through, that allows you to repeatedly honing the blade or his fully re-grind it. Totally hand made at PETROGRAD factory of joinery and carpentry tools.

Made in Russia.

4700p
Отзывов: 1
Рейтинг:

Carving knife PETROGRAD, Bogorodsky type, 170mm/40mm

Carving knives for general use, as well as for large material removal. Blade length 40mm or 60mm, rounded butt. A comfortable oval redwood handle is saturated with oil and covered with shellac. The length of the handle - 115mm. Excellent knife for both beginners and professionals. The 2.5 mm thick blade is made of high carbon steel hardened to 59-61 HRc. All the knives are sharpened and ready to go. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
 
1400p
Отзывов: 1
Рейтинг:

Carving knife PETROGRAD, Swedish type, 170mm/40mm

Carving knives with a straight butt and a curved cutting edge are great for strength work. Blade length 45mm or 60mm. The length of the handle - 115mm. The 2.5 mm thick blade is made of high carbon steel hardened to 59-61 HRc. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
 
1400p
Отзывов: 1
Рейтинг:

Sharpening set PETROGRAD N3, for knives, 3 stones

Water stones. Grain size: 150, 360, 500, 1000, 1500 and 2000. Size 15х15х120mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Made in Russia.

To select and order an abrasive stone of desired grain size, click on the name of the product.

 

1290p
Отзывов: 1
Рейтинг:

Center finding dowel/tenon pin set PETROGRAD, D6 mm, 6 pcs

Center finding pins for furniture dowels. Diameter of punch: 5 mm, 6 mm, 8 mm, 10 mm, 12 mm. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

460p
Отзывов: 1
Рейтинг:

Mallet PETROGRAD, `barrel`, D85mm, 600 g

Mallet PETROGRAD, "barrel", striker size - mm D85
Excellent all-wooden mall weighing 500 g (+ -30 g)
The mallet is made of beech and covered with tung oil. The mallet has a barrel shape and a comfortable, chiseled, ergonomic handle. The handle is fixed on a wooden wedge. Mallets are widely used when working with bits and chisel chisels when cutting connections, as well as when carving large items or sculptures.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

1100p
Отзывов: 1
Рейтинг:

Outdoor axe PETROGRAD, model Roslavl VII, straight handle

Outdoor axe. Overall length - 370 mm. Axe height - 140 mm. The length of the cutting edge - 115 mm. The axe is forged by hand from 65G steel (Germany 66Mn4, Ck67, USA 1066). Sharpening straight. Total weight - 0.7 kg. Comes with a leather case to protect the blade. The axe handle is made of maple wood, 320 mm long. The axe is perfectly balanced and is suitable for a wide variety of works, like a hiking axe, for small carpentry and carpentry works, and simply as a universal axe.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

 

8500p
Отзывов: 1
Рейтинг:

Carving axe PETROGRAD, model Zvenigorod VII

Wood carving axe Zvenigorod VII . This axe is made for artistic processing of wood, such as carving sculptures, bowl carving, dish carving and other stuff.

  • Blade width 120 mm
  • Sharpening angle - 25 degrees
  • Hardness - 55-58HRc
  • Handle lenght - 350 mm
  • Full weight - 07 kg

Carving axe Zvenigorod VII is quite small and easy to control. It's weight is about 650g, makes it maneuverable and allows you to work more accurate and precise.

The shape of the axe head was designed for carving operations where palm is resting extreamly close to axe head or even on the axe head. This design helps to exelent control of the axe even during long carving sessions. Grip above the head is used for trimming, stripping. This axe model was based on samples from museum "Rubankov" and finalized taking into account the wishes of wood carvers.

The axe head is hand forged from steel 65Г (spring steel) and hardened to 55 - 58 HRc at the cutting edge and along the entire beard, the rest part is normalized to HB280. This hardening allows you to hit the poll without the risk of creating a cracks in the metal.
Head has mounted to handle on 3 wedges, one along the head eye and two in cross section.

Cutting edge is razor sharp and ready to work out of the box. Sharpening angle - 30 degrees.

Axe handle is made of maple* and coated with Danish oil**. The hatchet handle has a longitudinal bend. In cross-section the handle has the shape of an egg, which is very convenient for good grip while carving. Handle has a hole for hanging.

Woodcarving axe Zvenigorod VII are product of Petrograd toolworks and supplied in a leather case for protection of the cutting edge and easy storage. Made in Saint-Petersburg Russia.

9200p
Отзывов: 1
Рейтинг:

Leather Knife PETROGRAD, type 2, double bevel

Knives saddlery PETROGRAD.
The saddlery knife is designed for cutting and grinding leather. It can be used for straight cutting and skin cutting. The knife is equipped with a leather case.

4700p
Отзывов: 1
Рейтинг:

Leather Knife PETROGRAD, type 4, double bevel

Ножи шорные ПЕТРОГРАДЪ.
Нож шорный предназначен для раскроя и шерфование кожи. Mожно использовать  для прямолинейного реза и торцевания кожи. 
Комплектуются чехлами для защиты режущей кромки и от случайных порезов рук. Производство фабрики ПЕТРОГРАДЪ. 

  

2600p
Отзывов: 1
Рейтинг: