Categories
- New
- Sale
- Sharpeping
- Measurement and Мarking
- Books & magazines
- Basket weaving tools (wickerwork tools)
- Workshop furniture
- Hammers, Mallets, Screwdrivers
- Tool Sets
- Knives
- Saws
- Wood carving tools
- Hand planes
- Garden tools
- Drawknives
- Work clothes
-
Chisels
- Долота ПЕТРОГРАДЪ, серия Двина
- Коротки стамески серии Нева
- Timber framing chisels
- Cabinetmaking chisels
- Carving chisels Petrograd
- Carving chisels Rubankov
- Стамески для резьбы, серия Истукан
- Стамески ПЕТРОГРАДЪ, серия Десна, зачистные (flush chisels)
- Стамески ПЕТРОГРАДЪ, серия Охта, столярные скошенные
- Стамески ПЕТРОГРАДЪ, серия Печора, для зачистки дна паза
- Столярные стамески серии Волга
- Столярные стамески, серия Мста, "рыбий хвост"
- Угловые стамески
- Woodturning tools
- Axes, hatchets, adzes
- Storage systems
- Checkering tools
- Clamps
- Мебель для дома
- Gifts & souvenirs
- Работа по камню
- Drill & Screw
- Flap sanding wheels
- Out of order
-
-
Total cart price:
Просмотренные товары
Share / Save Link:
Petrograd Carbide Burnisher, type 1, d3mm*20mm
- Основной склад: 20 шт.Петербург: 2 шт.Москва: 5 шт.
Description
Burnisher tool for card scrappers. Designed to set burr on curl and straight scraping cards. Pin made of silicon carbide and secured by the compound. Handle made of maple wood, reinforced with a brass ring and oil coated.
- silicon carbide pin
- pin diametre is 3.2mm
- maple handle
The small dimensions and small diameter of the steel pin will be convenient when setting burr on small concave or straight card scrapers. Production of Petrograd toolworks. Made in Saint-Petersburg Russia.
* scraper is not included in the package.| Pin materia: | Silicon carbide |
|---|---|
| Handle material: | Maple |
| Diametr: | 3.2 mm |
| Pin lenght: | - |
| Full lenght: | 147 mm |
| Weight: | 30 gramm |
Share / Save Link:
Specs
Reviews
Upload Image
Drag and drop a photo here or click to select
Photo will be published after moderation
Instructions ()
Publications
Upload Image
Drag and drop a photo here or click to select
Photo will be published after moderation
Recommended products
Magazine Master&Workshop 2020 № 2 (9)
Журнал Мастер и мастерская 2020 2 (9)
Sharpening stone PETROGRAD, 200*70*20mm, 360 grit
Abrasive water stones. Grit: 150, 360, 500, 800, 1000,1500, 2000 and 4000 grit. Size 200x70x20mm. The abrasive grain is silicon carbide. Bond - ceramics. Hardness I ensures minimal wear of the stone during work. Steel does not overheat when sharpening. Does not require oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Manufactured in Russia.
Sharpening stone PETROGRAD, 200*70*20mm, 2000 grit
Water stone. 2000 grit. Size 200*70*20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Used for sharpening and setting bevels.
High sharpening performance, second only to diamond, is ensured by the use of silicon carbide abrasive grains, which are notable for their sharpness and brittleness. The high hardness of carbide-silicon grinding materials allows you to confidently process not only carbon steels, but also hard alloys, which is impossible on stones made of electro-alumina powders. In addition to performance, it is worth noting the extraordinary tactile sensations when sharpening a tool. Stones quickly give a slurry and produce a very pleasant sound.
Water stones PETROGRAD are distinguished by high performance and geometry in a state of delivery.
In the characteristic of a water stone are specified: the first letter - hardness (I, J - soft, K - average); Japanese grain size according to JIS R6001-1987 is 150 (80 microns), 360 (34 microns), 500 (24 microns), 1000 (12 microns), 2000 (6 microns) and C is silicon carbide.
Comparison of FEPA, JIS and GOST standards:

Cabinet scraper PETROGRAD, 100*40*0.8mm
Designed for scraping wood. This is a simple yet highly effective tool. It allows you to process twisted areas of wood, leaving behind a perfectly smooth surface. Also ideal for removing old paintwork and adhesives. Unlike sandpaper, the rectangular scraper does not fill up the edges or clog the pores of the wood. After processing the cycles, finishing materials can be applied. Before using the cycle, it is necessary to align the planes and sharpen the ends, and then set the burr (burr). For burr aiming, we recommend using the special aiming Petrograd. The plate is made of carbon steel, 0.8 mm thick. The guide for the cycle is not included in the package.
Production of the factory of joinery and carpentry tools PETROGRAD
Popular goods
Carving knife PETROGRAD, Bogorodsky type, 200mm/60mm
Carving knives for general use, as well as for large material removal. Blade length 40mm or 60mm, rounded butt. A comfortable oval redwood handle is saturated with oil and covered with shellac. The length of the handle - 115mm. Excellent knife for both beginners and professionals. The 2.5 mm thick blade is made of high carbon steel hardened to 59-61 HRc. All the knives are sharpened and ready to go. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
Carving knife PETROGRAD, Finnish type, 175mm/45mm
Carving knives with a sharp tip are designed for detailing and working in hard to reach places. Blade length 45mm or 60mm, rounded butt. A comfortable oval redwood handle is saturated with oil and covered with shellac. The length of the handle - 115mm. Excellent knife for both beginners and professionals. The 2.5 mm thick blade is made of high carbon steel hardened to a 59-61 HRc. All the cutters are sharpened and ready to go. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
Checkering tool complete C-1, 60°
Резец C-1, имеет 1 пирамидальный зуб. Угол вершины 90 и 60 градусов. Резец продается в сборе, имеют удобную рукоять из бука и шток с установленной на нем рабочей частью. Все резцы изготовлены из стали, прошли процесс закалки и обработки, для продолжительной и надежной работы.
Имеет V-образную форму с зубцами по обе стороны. Резец С-1 предназначен для нанесения оригинального макета рисунка, а также для углубления канавок после их нанесения, другими резцами.
Деревянная рукоятка хорошо сбалансирована и удобно лежит в руке.
На фотографии детально показаны зубцы. Обратите внимание на высокую рельефность, обеспечивающую быструю и ровную нарезку. Зубцы обеспечивает хорошее удаление всех твердых пород древесины.
Резцу все равно, что вырезать глубокие или мелкие пазы, прямые или закругленные углы, параллельные линии или перекрестную штриховку, по направлению волокна или поперек. Не нужно заново делать проход, чтобы обработать неровные участки. Ровной получается каждый элемент.
Ширина рабочей части 5 мм, длина рабочей части 11 мм, угол вершины 90 и 60 градусов.
Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ.
Сделано в России
Checkering tool complete C-1, 90°
Checkering tool C-1 has 1 pyramidal tooth. Angle top 90 degrees. All the cutters are made of steel, undergone the process of hardening and processing, for long and reliable work.
It is V-shaped with teeth on both sides. Checkering tool C-1 is designed for applying the original layout of the picture, as well as for deepening the grooves after their application, with other cutters.
The wooden handle is made of beech, well balanced and lies comfortably in your hand.
Pay attention to the high relief, providing fast and smooth cutting. The tines provide good removal of all hardwoods.
The cutter doesnt look like cutting - deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Equal each element is obtained.
The width of the working part is 5 mm, the length of the working part is 11 mm, the apex angle 90 degrees.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
Outdoor axe PETROGRAD, model Roslavl 7, scandy bevel, handle n11
Hand forged outdoor axe Roslavl VII with curved handle. Axe as a woodworking tool has superior cutting abilities, short handle and would be good choiсe for any outdoor activity like campings, spoon making, making bonfire and etc. This axe is ideal for those who want take a small axe for different ways of use when you are going out and about in the countryside. Although it is light, it can be used to fell a small or even midle tree, thanks to its handle and heavy, strong head. The axe is also excellent for delimbing a tree and making wooden stakes.
- Total lenght is 370mm ( 14,57inch )
- Height of axe is 140mm ( 5,51inch )
- Lenght of cutting edge is 120mm ( 4,72inch )
- Axe is hand forged from 65G steel (Germany 66Mn4, Ck67, USA 1066).
- Curved cutting edge was straight sharpened.
- Total weight of axe is 0,7kg ( ± 0,05kg )
- Handle lenght is 320mm ( 12,6inch) and it is made from solid mapple with right grain position.
- The axe comes with leather case for protecting cutting edge.
Axe is well balanced and would be a good choice for a lot types of work. It will be great as outdoor axe, for small carpentry and othe woodwork projects. This is kind of universal axe for everyone.
Axe Roslavl VII produced by Petrograd toolworks in Saint Petersburg Russia.
| Head weight: | 0.63 kg |
|---|---|
| Full weight: | 0.7 kg |
| Type: | outdoor hatchet |
| Steel: | 65Г |
| Hardness: | 55-58HRc |
| Handle material: | Ash* |
| Handle lenght: | 320 mm |
| Edge: | Curved |
| Sharpening angle: | 30 degrees |
| Blade lenght: | 120 mm |
| Total lenght: | 370 mm |
** coating oil may changes too
Spoon knife, PETROGRAD, type 1/22, left-handed
Ложкорез по дереву ПЕТРОГРАДЪ модель N1/22, это инструмент для резьбы деревянных ложек и других впуклых поверхностей. Основная задача ложкореза - выборка лунки в деревянной ложке (черпало). Выпускается двух видов: правый и левый. Производство фабрика Петроградъ (Россия)
Carving knife PETROGRAD, skew type, 45 degrees
Нож для резьбы по дереву, ПЕТРОГРАДЪ, косая заточка 45град. Предназначен для широкого спектра работ. Рукоять выполнена из ясеня, угол скоса 45 градусов, инструментальная сталь. Производство фабрика Петроградъ (Россия).
Butt chisel, PETROGRAD, model Neva, 6mm
Стамеска ПЕТРОГРАДЪ, серия Нева, 6мм. Стамески спроектированы, ориентируясь на многолетний опыт мастеров-краснодеревщиков. Форма лезвия имеет боковые скосы для работы в труднодоступных местах, например при подрезке и подчитки шиповых соединений: ласточкин хвост, шип-проушина, впол дерева, сковородней и прочие. Производятся с различной шириной полотна от 3мм до 26мм. Толщина лезвия переменная и увеличивается от режущей кромки к рукояти. Производство фабрика Петроградъ (Россия)
Outdoor axe PETROGRAD, model Roslavl X, handle
Топор кованый ПЕТРОГРАДЪ, модель Рославль 10, топорище н25. Отличается от других топоров удлиненной режущей кромкой. Благодаря этой особенности топор можно брать близким к полотну хватом и не бояться поранить руку при работе. Такой хват очень удобен при тёске и ошкуривании бревен. Удлиненная рукоять позволяет без лишних усилий рубить ветки и сучья. Производство фабрика Петроградъ (Россия).
Масло камелии, KAPLEUM, Лаванда, 60 мл.
Масло камелии, KAPLEUM, Лаванда, 60 мл. Неформальная творческая группа GILDIA.PRO предлагает новый продукт, изготовленный на основе отлично зарекомендовавшего себя масла Камелии – KAPLEUM.






