Wooden plane PETROGRAD, Gerfschaaf type


  • Петербург: 1 шт.
    Москва: 1 шт.

Rating : (0)
Shipping: worldwide

9500 p (0)

Description

Рубанок деревянный ПЕТРОГРАДЪ, 165мм / 30мм, голландский тип (Gerfschaaf) это классический "фартучный" рубанок, основным предназначением которого издревле была работа за пределами мастерской. Образцом для создания рубанка голландского типа стал рубанок, известный под названием Gerfschaaf и хранящийся В Музее-Мастерской Рубанков. Производство фабрика Петроградъ (Россия).

Характеристики рубанка:

  • Ширина ножа 30 мм
  • Длина подошвы 140 мм
  • Длина рубанка 165 мм
  • Угол заточки 30 градусов
  • Прижим выполнен из латуни
  • Подошва выполнена из граба
  • Тело колодки выполнено из бука

Историческая справка:

Под названием Gerfschaaf понимается рубанок для грубого строгания. Как правило, такие рубанки снабжены одинарным ножом шириной 30-40мм. Попадаются экземпляры с полукруглыми подошвой и ножом, то есть, являющиеся шерхебелями. Наибольшее распространение такие рубанки имели в XVII-XVIII веках в Голландии.

Но для нас при разработке новой модели рубанка была более важна его форма, чем-то напоминающая старинные парусные корабли.

Мы воспользовались этой идеей для создания нашего нового рубанка в немного изменённом виде. Получился небольшой, так называемый фартучный рубанок для чистового строгания. Колодка выполнена из бука, подошва - из граба.

Мы отказались от деревянного клина в пользу латунного прижима, который великолепно показал себя на других моделях деревянных рубанков, выполненных на фабрике ПЕТРОГРАДЪ. На прижиме установлен латунный винт, надёжно фиксирующий винт.

Рубанок снабжён ножом шириной 30мм, отшлифованным "на конус". Толщина ножа в районе фаски - 5.5мм, у тыльной части - 5.5мм. Такая форма ножа позволяет выполнять строгание древесины не опасаясь "ухода" ножа вглубь колодки даже на тяжёлых участках. Фаска ножа - 30 градусов, нож заточен и готов к работе.

Для установки ножа мы рекомендуем использовать латунный молоток, производимый на фабрике Петроградъ.

Примечание

Сейчас модель существует в единственном экземпляре. Ограниченная партия таких рубанков будет выпущена к концу декабря 2022 года.

Принимаем предзаказы.

Всем покупателям, оформившим заказы в до 9 декабря, мы делаем подарок - настроечный молоток ПЕТРОГРАДЪ!


Share / Save Link:

Specs

Reviews

Instructions ()

Нет файлов

Publications

new

Wooden bench plane PETROGRAD, 50mm/230mm

Classic bench plane with brass cap and wedge shaped blade. This is a common wooden hand plane for surface flattening. Sole of hand plane was made of hard wood. We had replace the wooden wedge with brass cap mechanism for more secure fix and for minimizing vibrations of hand plane blade during the work.

  • lenght of sole - 230mm
  • width of blade - 50mm

Fixing cap is mounted on a strong steel stud, the knob acts as a lever. This design of the clamping cap allows for quick and accurate adjustment of the blade overhang. Body of hand plane was coated with oil. Blade installation angle - 50 °. The blade made of alloy tool steel and hardened to a hardness of 59-61HRC.

  • blade installation angle - 50 °
  • blade dimensions: length - 175mm
  • blade width - 50mm
  • blade shape - wedge
  • The minimum thickness of the blade is 2.2 mm, the maximum thickness is 3.5 mm
  • The blade sharpening angle is 25 ° and the micro chamfer on the edge is 30 °

Hand plane was produced by Petrograd toolworks in Saint Petersburg Russia.

Hand plane Specification:
Weight: 0.93 kg
Type: Bench plane N4
Blade Steel: ШХ15 (alloy tool steel)
Blade shape: wedge
Blade hardness: 59-61HRc
Edge blade: Straight
Blade lenght: 175 mm
Blade width: 50 mm
Sole material: hornbeam
Body material: maple
Handle material: Oak*
Sole lenght: 230 mm
* handle material can various from batch to batch
12550p(0)
Отзывов: 1
>Рейтинг:
%

Wooden jack plane PETROGRAD, 50mm/320mm, with two blades

Traditional wooden jack plane supplies with two blades. Jack plane preferly used for flattening sheets, beams and boards. Too speed up the flattening process we supply it with two blades: round one for rough flattening and straight one for clean flattening. We had replace the wooden wedge with brass cap mechanism for more secure fix and for minimizing vibrations of hand plane blade during the work.

Main hand plane body was made of maple with brass cap for reliable fixation of the blade, the sole was made of hornbeam, the handle was made of oak. Coating - tung oil and wax.

  • hand plane dimensions 325*70*160 mm
  • main body made of mapple
  • sole made of hornbeam
  • cap made of brass
  • handle made of oak, cherry or walnut (depends on batch)
  • coating - tung oil and wax

Fixing cap is mounted on a strong steel stud, the knob acts as a lever. This design of the clamping cap allows for quick and accurate adjustment of the blade overhang. Body of hand plane was coated with oil. Blade installation angle - 50 °. The blade made of alloy tool steel and hardened to a hardness of 59-61HRC.

  • blade installation angle - 50 °
  • blade hardness - 59-61HRc
  • blade dimensions: length - 175mm
  • blade width - 50mm
  • blade shape - wedge
  • The minimum thickness of the blade is 2.2 mm, the maximum thickness is 3.5 mm
  • The blade sharpening angle is 25 ° and the micro chamfer on the edge is 30 °

Jack hand planes are produced by Petrograd toolworks in Saint-Petersburg Russia.

Hand plane Specification:
Weight: 1.15 kg
Type: Jack plane
Blade Steel: ШХ15 (alloy tool steel)
Blade hardness: 59-61HRc
Edge blade 1: Straight
Edge blade 2: Round
Blade lenght: 175 mm
Blade width: 50 mm
Sole material: hornbeam
Body material: maple
Handle material: Oak*
Sole lenght: 325 mm
* handle material can various from batch to batch
16000p(0)
Отзывов: 1
>Рейтинг:

Wooden apron plane PETROGRAD, 30mm/150mm

Traditional wooden small plane, the so-called "apron hand plane". This small hand plane uses for various types of work, it is always at hand, fit in the pocket of your clothes or apron.

  • body of hand plane is made of hornbeam
  • wedge made of mahogany
  • hand plane dimensions: 150x45x69 mm
  • coating - oil and wax

Blade installed in hand plane body with 45 degrees angle and fixed by wooden wedge.

  • blade was made of alloyed tool steel 9XC (DIN - 150Cr14)
  • hardned to 59-61 HRC.
  • blade length - 79 mm
  • blade width - 30 mm
  • blade shape - wedge
  • blade thickness minimum 4.8 mm
  • maximum thickness - 5.2 mm.
  • sharpening edge is 30 °

All PETROGRAD hand plane blades have a wedge-shaped descent with an angle of 0.5 degrees. This distinguishes them favorably from other plane blades, and makes them ideal for wooden planes with a wedge fixation. The working side of the knife, hardened to a hardness of 59-61 HRc, is marked with small indentations, which remain from the hardness gauge after checking the knife. These recesses, which are located on each blade, are evidence of checking blades and do not affect the performance of the product.

IMPORTANT! The reverse side of the knife, not marked with control points, is not working!
The manufacturer reserves the right to change the thickness of the knife without degrading the working qualities of the tool.

Hand made by Petrograd toolworks in Saint Petersburg Russia.

8550p(0)
Отзывов: 2
>Рейтинг:
%

Wooden bench plane PETROGRAD, 40mm/230mm

Traditional wooden plane. The shoe is made of maple with brass insert for reliable fixation of the blade, the sole is made of hornbeam. The wedge is also made of maple, easy to install and remove. The installation angle of the blade is 50 °. The angle of sharpening of a blade is 25 ° and a microbevel on an edge at 30 °

The plane blade is made of steel 9ХС (DIN - 150Cr14). Hardened to 59-61 HRC. Dimensions: total length 175 mm, width 60 mm, thickness minimum 3.5 mm, thickness maximum 5 mm.
All blades are wedge-shaped with a wedge angle of 0.5 degrees, which favorably distinguishes them from others, and are ideally suited for wooden planes with wedge fixation.
Blades have two sides - one is hard, the other is soft (production feature)
Absolutely every blade is tested with a hardness tester.
The solid side has 2 points from the diamond cone - the test, and the control test.

The manufacturer reserves the right to change the thickness and appearance of the knife without degrading the working qualities of the tool.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

11000p(0)
Отзывов: 1
>Рейтинг:

Carving knife PETROGRAD, Bogorodsky type, 200mm/60mm

Carving knives for general use, as well as for large material removal. Blade length 40mm or 60mm, rounded butt. A comfortable oval redwood handle is saturated with oil and covered with shellac. The length of the handle - 115mm. Excellent knife for both beginners and professionals. The 2.5 mm thick blade is made of high carbon steel hardened to 59-61 HRc. All the knives are sharpened and ready to go. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

2700p
Отзывов: 1
Рейтинг:

Carving knife PETROGRAD, Finnish type, 175mm/45mm

Carving knives with a sharp tip are designed for detailing and working in hard to reach places. Blade length 45mm or 60mm, rounded butt. A comfortable oval redwood handle is saturated with oil and covered with shellac. The length of the handle - 115mm. Excellent knife for both beginners and professionals. The 2.5 mm thick blade is made of high carbon steel hardened to a 59-61 HRc. All the cutters are sharpened and ready to go. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

2500p
Отзывов: 1
Рейтинг:

Checkering tool complete C-1, 60°

Резец C-1, имеет 1 пирамидальный зуб. Угол вершины 90 и 60 градусов. Резец продается в сборе, имеют удобную рукоять из бука и шток с установленной на нем рабочей частью. Все резцы изготовлены из стали, прошли процесс закалки и обработки, для продолжительной и надежной работы.
Имеет V-образную форму с зубцами по обе стороны. Резец С-1 предназначен для нанесения оригинального макета рисунка, а также для углубления канавок после их нанесения, другими резцами.
Деревянная рукоятка хорошо сбалансирована и удобно лежит в руке.
На фотографии детально показаны зубцы. Обратите внимание на высокую рельефность, обеспечивающую быструю и ровную нарезку. Зубцы обеспечивает хорошее удаление всех твердых пород древесины.
Резцу все равно, что вырезать глубокие или мелкие пазы, прямые или закругленные углы, параллельные линии или перекрестную штриховку, по направлению волокна или поперек. Не нужно заново делать проход, чтобы обработать неровные участки. Ровной получается каждый элемент.

Ширина рабочей части 5 мм, длина рабочей части 11 мм, угол вершины 90 и 60 градусов.

Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ.

Сделано в России

900p
Отзывов: 1
Рейтинг:

Checkering tool complete C-1, 90°

Checkering tool C-1 has 1 pyramidal tooth. Angle top 90 degrees. All the cutters are made of steel, undergone the process of hardening and processing, for long and reliable work.
It is V-shaped with teeth on both sides. Checkering tool C-1 is designed for applying the original layout of the picture, as well as for deepening the grooves after their application, with other cutters.
The wooden handle is made of beech, well balanced and lies comfortably in your hand.
Pay attention to the high relief, providing fast and smooth cutting. The tines provide good removal of all hardwoods.
The cutter doesnt look like cutting - deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Equal each element is obtained.

The width of the working part is 5 mm, the length of the working part is 11 mm, the apex angle 90 degrees.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

900p
Отзывов: 1
Рейтинг:

Outdoor axe PETROGRAD, model Roslavl 7, scandy bevel, handle n11

Hand forged outdoor axe Roslavl VII with curved handle. Axe as a woodworking tool has superior cutting abilities, short handle and would be good choiсe for any outdoor activity like campings, spoon making, making bonfire and etc. This axe is ideal for those who want take a small axe for different ways of use when you are going out and about in the countryside. Although it is light, it can be used to fell a small or even midle tree, thanks to its handle and heavy, strong head. The axe is also excellent for delimbing a tree and making wooden stakes.

  • Total lenght is 370mm ( 14,57inch )
  • Height of axe is 140mm ( 5,51inch )
  • Lenght of cutting edge is 120mm ( 4,72inch )
  • Axe is hand forged from 65G steel (Germany 66Mn4, Ck67, USA 1066).
  • Curved cutting edge was straight sharpened.
  • Total weight of axe is 0,7kg  ( ± 0,05kg )
  • Handle lenght is 320mm ( 12,6inch) and it is made from solid mapple with right grain position.
  • The axe comes with leather case for protecting cutting edge.

Axe is well balanced and would be a good choice for a lot types of work. It will be great as outdoor axe, for small carpentry and othe woodwork projects. This is kind of universal axe for everyone.

Axe Roslavl VII produced by Petrograd toolworks in Saint Petersburg Russia.

Axe Roslavl VII Specifications:
Head weight: 0.63 kg
Full weight: 0.7 kg
Type: outdoor hatchet
Steel: 65Г
Hardness: 55-58HRc
Handle material: Ash*
Handle lenght: 320 mm
Edge: Curved
Sharpening angle: 30 degrees
Blade lenght: 120 mm
Total lenght: 370 mm
 * material of handles may changes from batch to batch.
** coating oil may changes too
13000p
Отзывов: 1
Рейтинг:

Leather Knife PETROGRAD, type 1, double bevel

Leather Knife type 1 is a leather Head knife, also known as Round knife or even a Half-Moon knife. Head knife has double-sided sharpening. It's one of the oldest and most versality leather workning tool.

  • for straight cuts
  • for curved cuts
  • for skiving
  • for multiple layers cut

Leather knife type 1 by Petrograd toolworks comes with a leather sheath. Edge is perfectly sharpened and reade to work out of the box.
This type of knives is used in handicraft, leather, and shoemaking.

  • blade made of tool alloy steel 9ХФ
  • blade thickness - 2 mm
  • edge radius - 61 mm
  • handle made of wood *
  • oil covered **

Handles are made of wood and fixed with 2 brass rivets. The kit includes a neat stitched leather case.
Knives for leather work are produced by Petrograd toolworks in Saint Petersburg Russia

Weight: 0.2 kg
Type: round knife
Steel: 9ХФ
Hardness: 58-61 HRc
Handle material: beech*
Handle lenght: 110 mm
Edge: curved
Sharpening: double sided
Blade lenght: 120 mm
Total lenght: 175 mm
 * material of handles may changes from batch to batch.
** coating oil may changes too
5130p
Отзывов: 1
Рейтинг:
new

Spoon knife, PETROGRAD, type 1/22, left-handed

Ложкорез по дереву ПЕТРОГРАДЪ модель N1/22, это инструмент для резьбы деревянных ложек и других впуклых поверхностей. Основная задача ложкореза - выборка лунки в деревянной ложке (черпало). Выпускается двух видов: правый и левый. Производство фабрика Петроградъ (Россия)

3200p
Отзывов: 1
Рейтинг:
new

Carving knife PETROGRAD, skew type, 45 degrees

Нож для резьбы по дереву, ПЕТРОГРАДЪ, косая заточка 45град. Предназначен для широкого спектра работ. Рукоять выполнена из ясеня, угол скоса 45 градусов, инструментальная сталь. Производство фабрика Петроградъ (Россия).

2500p
Отзывов: 1
Рейтинг:
new%

Outdoor axe PETROGRAD, model Roslavl X, handle

Топор кованый ПЕТРОГРАДЪ, модель Рославль 10, топорище н25. Отличается от других топоров удлиненной режущей кромкой. Благодаря этой особенности топор можно брать близким к полотну хватом и не бояться поранить руку при работе. Такой хват очень удобен при тёске и ошкуривании бревен. Удлиненная рукоять позволяет без лишних усилий рубить ветки и сучья. Производство фабрика Петроградъ (Россия).

15000p
Отзывов: 1
Рейтинг:
new

Масло камелии, KAPLEUM, Лаванда, 60 мл.

Масло камелии, KAPLEUM, Лаванда, 60 мл. Неформальная творческая группа GILDIA.PRO предлагает новый продукт, изготовленный на основе отлично зарекомендовавшего себя масла Камелии – KAPLEUM.

 

720p
Отзывов: 1
Рейтинг: